When must new enrolments into MSA20510 stop?

New enrolments are not permitted from 15 December 2016 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in MSA20510?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MSA20510 Certificate II in Recreational Vehicle Service and Repair

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MSA20510Superseded — equivalentCertificate II in Recreational Vehicle Service and Repair
equivalent
MSM21015Superseded — not equivalentCertificate II in Recreational Vehicle Service and Repair
not equivalent
MSM21122CurrentCertificate II in Recreational Vehicle Trade Pathways

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MSA20510MSM21015equivalent14 December 2015
The register records this supersession but attaches no note on what changed.

Is MSA20510 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MSA20510 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MSA20510 is made of

training.gov.au lists 52 units for MSA20510. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 52 listed

Code	Unit	Core or elective	In this product
AUMGTT001	Apply trim to vehicle components	`N/A`	current
AURETB3001	Repair electric braking systems	`N/A`	not current
AURETR2010	Fabricate, test and repair wiring harnesses and looms	`N/A`	not current
AURETR2012	Test and repair basic electrical circuits	`N/A`	not current
AURETR2015	Inspect and service batteries	`N/A`	not current
AURTTA3017	Carry out vehicle safety and roadworthy inspections	`N/A`	not current
AURTTB2001	Inspect and service braking systems	`N/A`	not current
AURTTD2004	Inspect and service suspension systems	`N/A`	not current
AURTTJ2002	Remove and refit wheel hubs and associated brake components	`N/A`	not current
AURTTY3001	Repair chassis, frame and associated components	`N/A`	not current
AURVTG3011	Install side windows	`N/A`	not current
AURVTN2005	Remove and fit protector mouldings, transfers and decals	`N/A`	not current
AURVTP2007	Apply paint touch-up techniques	`N/A`	not current
AURVTS3004	Repair fibreglass and composite material components	`N/A`	not current
AURVTT3015	Fabricate canvas products	`N/A`	not current
AURVTT3016	Fabricate frame structures	`N/A`	not current
AURVTT3019	Fabricate and install canopies and curtains	`N/A`	not current
MEM05005B	Carry out mechanical cutting	`N/A`	not current
MEM05012C	Perform routine manual metal arc welding	`N/A`	not current
MEM05050B	Perform routine gas metal arc welding	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM10002B	Terminate and connect electrical wiring	`N/A`	not current
MEM11011B	Undertake manual handling	`N/A`	not current
MEM12002B	Perform electrical/electronic measurement	`N/A`	not current
MEM12023A	Perform engineering measurements	`N/A`	not current
MEM14004A	Plan to undertake a routine task	`N/A`	not current
MEM15024A	Apply quality procedures	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18002B	Use power tools/hand held operations	`N/A`	not current
MEM18038B	Maintain wheels and tyres	`N/A`	not current

Show the remaining 22 units

Code	Unit	Core or elective	In this product
MEM18045B	Fault find/repair electrical equipment/components up to 250 volts single phase supply	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAPMOHS200A	Work safely	`N/A`	not current
MSAPMOHS220A	Provide initial First Aid response	`N/A`	current
MSAPMOPS101A	Make measurements	`N/A`	not current
MSAPMOPS212A	Use organisation computers or data systems	`N/A`	not current
MSAPMSUP100A	Apply workplace procedures	`N/A`	not current
MSAPMSUP101A	Clean workplace or equipment	`N/A`	not current
MSAPMSUP102A	Communicate in the workplace	`N/A`	not current
MSAPMSUP106A	Work in a team	`N/A`	not current
MSAPMSUP280A	Manage conflict at work	`N/A`	not current
MSAPMSUP291A	Participate in continuous improvement	`N/A`	not current
MSARVG201A	Tow a recreational vehicle safely	`N/A`	not current
MSARVS202A	Repair/service LP gas systems in a recreational vehicle	`N/A`	not current
MSARVS301A	Develop and update caravan industry knowledge	`N/A`	current
MSARVT201A	Apply technical knowledge of recreational vehicle manufacturing to work activities	`N/A`	not current
MSS402021A	Apply Just in Time procedures	`N/A`	not current
MSS402040A	Apply 5S procedures	`N/A`	not current
MSS402080A	Undertake root cause analysis	`N/A`	not current
SIRXSLS002A	Advise on products and services	`N/A`	not current
TLID2010A	Operate a forklift	`N/A`	not current
UEGNSG604B	Fill gas cylinders	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MSA training product on the register · Search all training products

Is MSA20510 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.