LMTTX3013A Set up, adjust and maintain spinning machines

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for LMTTX3013A ended on 2 July 2016 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 4 July 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
LMT07 — Textiles, Clothing and Footwear Training Package
Currency period ends
2 July 2016
Latest release
Release 1 · 16 July 2011
Supersedes
nothing — no earlier product listed
Superseded by
MSTTX3011 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. LMTTX3013ASuperseded — not equivalentSet up, adjust and maintain spinning machines
  2. not equivalent
  3. MSTTX3011CurrentSet up, adjust and monitor a machine for TCF production

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • LMTTX3013AMSTTX3011not equivalent3 July 2016

    Supersedes:LMTTX3013A Set up, adjust and maintain spinning machines; LMTTX3014A Set up, adjust and maintain carding machines; LMTTX3015A Set up, adjust and maintain tufting looms; LMTTX3016A Set up, adjust and maintain domestic sewing machines; LMTTX3020A Identify and correct weaving process faults; LMTTX3021A Apply knowledge of weaving processes to production requirements; LMTTX3022A Set up and operate weaving looms for production; LMTTX3011A Set up, adjust and maintain circular knitting machines; LMTTX3012A Set up, adjust and maintain flat knitting machines. Not equivalent

Is LMTTX3013A on your scope?

This page is the register's record of one product. What it cannot tell you is whether LMTTX3013A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where LMTTX3013A is used

training.gov.au lists LMTTX3013A inside 4 training products, none of them current. Every one of them is below, with the register's own core or elective flag for LMTTX3013A in that product.

Products no longer current 4 listed

The register still records LMTTX3013A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeLMTTX3013A is
LMT30107Certificate III in Textile ProductionQualificationelective
LMT31909Certificate III in Engineering - TCF MechanicQualificationelective
LMT40107Certificate IV in Textile Technology and ProductionQualificationelective
LMT50407Diploma of Textile Technology and Production ManagementQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every LMT training product on the register · Search all training products

Is LMTTX3013A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.