LMTTX2008B Apply finishing processes to textile production

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for LMTTX2008B ended on 2 July 2016 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 4 July 2017. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

For an ASQA-registered RTO that does not already hold it, adding MSTTX2008 to scope is a change-of-scope application to ASQA, with a fee set by law: A$200 application fee + A$1,100 assessment fee per application (up to 5 VET courses and 50 units of competency). RTOs registered by a state regulator, and ASQA delegates, sit under other arrangements. Source: NVR Fees Determination 2026, F2026L00814, from 1 July 2026 · read 5 September 2026.

Product type
Unit of competency
Training package
LMT07 — Textiles, Clothing and Footwear Training Package
Currency period ends
2 July 2016
Latest release
Release 1 · 16 July 2011
Supersedes
nothing — no earlier product listed
Superseded by
MSTTX2008 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. LMTTX2008BSuperseded — not equivalentApply finishing processes to textile production
  2. not equivalent
  3. MSTTX2008Deleted from the registerOperate a machine for complex production operations

The register does not list a current endpoint for this chain: MSTTX2008 is the last product it points at, and MSTTX2008 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • LMTTX2008BMSTTX2008not equivalent3 July 2016

    Supersedes: LMTTX2008B Apply finishing processes to textile production; LMTTX2010B Load and operate dyeing equipment; LMTTX2016B Perform knotting for weaving operations; LMTTX2018B Re-start machine after stoppage; LMTTX2002B Prepare yarn for textile manufacturing; LMTTX2003B Perform spinning operations; LMTTX2004B Perform tufting operations LMTTX2005B Perform creeling operations LMTTX2006B Operate a weaving loom. Not equivalent.

Official documents on the register

What training.gov.au lists for LMTTX2008B and for its training package LMT07 (release 4.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is LMTTX2008B on your scope?

This page is the register's record of one product. What it cannot tell you is whether LMTTX2008B sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where LMTTX2008B is used

training.gov.au lists LMTTX2008B inside 5 training products, none of them current. Every one of them is below, with the register's own core or elective flag for LMTTX2008B in that product.

Products no longer current 5 listed

The register still records LMTTX2008B inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeLMTTX2008B is
LMT20107Certificate II in Textile Production (Intermediate)Qualificationelective
LMT20207Certificate II in Textile Production (Complex or Multiple Processes)Qualificationelective
LMT30107Certificate III in Textile ProductionQualificationelective
LMT40107Certificate IV in Textile Technology and ProductionQualificationelective
LMT50407Diploma of Textile Technology and Production ManagementQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 13 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every LMT training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is LMTTX2008B still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.