Can an RTO still enrol new students in AUM45108?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 29 June 2013. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in AUM45108?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

AUM45108 Certificate IV in Automotive Manufacturing (Bus/Truck/Trailer)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

AUM45108Superseded — not equivalentCertificate IV in Automotive Manufacturing (Bus/Truck/Trailer)
not equivalent
AUM40112Superseded — equivalentCertificate IV in Automotive Manufacturing
equivalent
AUM40113Deleted from the registerCertificate IV in Automotive Manufacturing

The register does not list a current endpoint for this chain: AUM40113 is the last product it points at, and AUM40113 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

AUM45101AUM45108equivalent31 August 2008
The register records this supersession but attaches no note on what changed.
AUM45108AUM40112not equivalent28 June 2012
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for AUM45108 and for its training package AUM08 (release 1.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

AUM45108_R1.docxAUM45108 release 1 · product document · published 26 November 2024
AUM45108_R1.pdfAUM45108 release 1 · product document · published 25 October 2013

Is AUM45108 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AUM45108 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AUM45108 is made of

training.gov.au lists 36 units for AUM45108. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 36 listed

Code	Unit	Core or elective	In this product
AUM2901B	Develop and produce documentation and procedures	`N/A`	not current
AUM3003B	Document designs	`N/A`	not current
AUM3401B	Plan and organise production	`N/A`	not current
AUM5301B	Produce drawings manually	`N/A`	not current
AUM5403B	Produce computer-aided drawings (CAD)	`N/A`	not current
AUM8012B	Prepare and document quotation	`N/A`	not current
AUM8032B	Control stock	`N/A`	not current
AUM8121B	Conduct final inspections and functional tests	`N/A`	not current
AUM8122B	Conduct simulated or road performance test	`N/A`	not current
AUM8123B	Conduct welding inspection	`N/A`	not current
AUM8141B	Prepare new product designs	`N/A`	not current
MSACMC410A	Lead change in a manufacturing environment	`N/A`	not current
MSACMS200A	Apply competitive manufacturing practices	`N/A`	not current
MSACMS201A	Sustain process improvements	`N/A`	not current
MSACMS401A	Ensure process improvements are sustained	`N/A`	not current
MSACMT220A	Apply quick changeover procedures	`N/A`	not current
MSACMT230A	Apply cost factors to work practices	`N/A`	not current
MSACMT231A	Interpret product costs in terms of customer requirements	`N/A`	not current
MSACMT250A	Monitor process capability	`N/A`	not current
MSACMT251A	Apply quality standards	`N/A`	not current
MSACMT260A	Use planning software systems in manufacturing	`N/A`	not current
MSACMT261A	Use SCADA systems in manufacturing	`N/A`	not current
MSACMT280A	Undertake root cause analysis	`N/A`	not current
MSACMT421A	Facilitate a Just in Time (JIT) system	`N/A`	not current
MSACMT430A	Improve cost factors in work practices	`N/A`	not current
MSACMT432A	Analyse manual handling processes	`N/A`	not current
MSACMT440A	Lead 5S in a manufacturing environment	`N/A`	not current
MSACMT450A	Undertake process capability improvements	`N/A`	not current
MSACMT451A	Mistake proof a production process	`N/A`	not current
MSACMT452A	Apply statistics to processes in manufacturing	`N/A`	not current

Show the remaining 6 units

Code	Unit	Core or elective	In this product
MSACMT460A	Facilitate the use of planning software systems in manufacturing	`N/A`	not current
MSACMT461A	Facilitate SCADA systems in a manufacturing team or work area	`N/A`	not current
MSACMT481A	Undertake proactive maintenance analyses	`N/A`	not current
MSACMT482A	Assist in implementing a proactive maintenance strategy	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAENV472B	Implement and monitor environmentally sustainable work practices	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AUM training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is AUM45108 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.