When must new enrolments into MSA41108 stop?

New enrolments are not permitted from 2 May 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in MSA41108?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MSA41108 Certificate IV in Competitive Manufacturing

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MSA41108Superseded — equivalentCertificate IV in Competitive Manufacturing
equivalent
MSS40312Superseded — equivalentCertificate IV in Competitive Systems and Practices
equivalent
MSS40316Superseded — not equivalentCertificate IV in Competitive Systems and Practices
not equivalent
MSS40322CurrentCertificate IV in Competitive Systems and Practices

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MSA41108MSS40312equivalent1 May 2012
Equivalent outcomes - increased choice of electives and unit require

Is MSA41108 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MSA41108 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MSA41108 is made of

training.gov.au lists 74 units for MSA41108. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 74 listed

Code	Unit	Core or elective	In this product
MSACMC210A	Manage the impact of change on own work	`N/A`	not current
MSACMC410A	Lead change in a manufacturing environment	`N/A`	not current
MSACMC411A	Lead a competitive manufacturing team	`N/A`	not current
MSACMC413A	Lead team culture improvement	`N/A`	not current
MSACMC610A	Manage relationships with non-customer external organisations	`N/A`	not current
MSACMC611A	Manage people relationships	`N/A`	not current
MSACMC612A	Manage workplace learning	`N/A`	not current
MSACMC613A	Facilitate holistic culture improvement in a manufacturing enterprise	`N/A`	not current
MSACMC614A	Develop a communications strategy to support production	`N/A`	not current
MSACMS200A	Apply competitive manufacturing practices	`N/A`	not current
MSACMS201A	Sustain process improvements	`N/A`	not current
MSACMS400A	Implement a competitive manufacturing system	`N/A`	not current
MSACMS401A	Ensure process improvements are sustained	`N/A`	not current
MSACMS405A	Lead a manufacturing team using a balanced score card approach	`N/A`	not current
MSACMS600A	Develop a competitive manufacturing system	`N/A`	not current
MSACMS601A	Analyse and map a value chain	`N/A`	not current
MSACMS602A	Manage a value chain	`N/A`	not current
MSACMS603A	Develop manufacturing related business plans	`N/A`	not current
MSACMS604A	Manage competitive manufacturing processes in a jobbing shop environment	`N/A`	not current
MSACMS605A	Develop a Balanced Scorecard for use in competitive manufacturing	`N/A`	not current
MSACMS606A	Introduce competitive manufacturing to a small or medium enterprise	`N/A`	not current
MSACMT220A	Apply quick changeover procedures	`N/A`	not current
MSACMT221A	Apply Just in Time (JIT) procedures	`N/A`	not current
MSACMT230A	Apply cost factors to work practices	`N/A`	not current
MSACMT231A	Interpret product costs in terms of customer requirements	`N/A`	not current
MSACMT240A	Apply 5S procedures in a manufacturing environment	`N/A`	not current
MSACMT250A	Monitor process capability	`N/A`	not current
MSACMT251A	Apply quality standards	`N/A`	not current
MSACMT260A	Use planning software systems in manufacturing	`N/A`	not current
MSACMT261A	Use SCADA systems in manufacturing	`N/A`	not current

Show the remaining 44 units

Code	Unit	Core or elective	In this product
MSACMT270A	Use sustainable energy practices	`N/A`	not current
MSACMT271A	Use sustainable environmental practices	`N/A`	not current
MSACMT280A	Undertake root cause analysis	`N/A`	not current
MSACMT281A	Contribute to the application of a proactive maintenance strategy	`N/A`	not current
MSACMT421A	Facilitate a Just in Time (JIT) system	`N/A`	not current
MSACMT423A	Monitor a manufacturing levelled pull system	`N/A`	not current
MSACMT430A	Improve cost factors in work practices	`N/A`	not current
MSACMT432A	Analyse manual handling processes	`N/A`	not current
MSACMT440A	Lead 5S in a manufacturing environment	`N/A`	not current
MSACMT441A	Facilitate continuous improvement in manufacturing	`N/A`	not current
MSACMT450A	Undertake process capability improvements	`N/A`	not current
MSACMT451A	Mistake proof a production process	`N/A`	not current
MSACMT452A	Apply statistics to processes in manufacturing	`N/A`	not current
MSACMT453A	Use six sigma techniques	`N/A`	not current
MSACMT460A	Facilitate the use of planning software systems in manufacturing	`N/A`	not current
MSACMT461A	Facilitate SCADA systems in a manufacturing team or work area	`N/A`	not current
MSACMT481A	Undertake proactive maintenance analyses	`N/A`	not current
MSACMT482A	Assist in implementing a proactive maintenance strategy	`N/A`	not current
MSACMT483A	Support proactive maintenance	`N/A`	not current
MSACMT620A	Develop quick changeover procedures	`N/A`	not current
MSACMT621A	Develop a Just in Time (JIT) system	`N/A`	not current
MSACMT622A	Design a process layout	`N/A`	not current
MSACMT623A	Develop a levelled pull system of manufacturing	`N/A`	not current
MSACMT630A	Optimise cost of product	`N/A`	not current
MSACMT631A	Undertake value analysis of product costs in terms of customer requirements	`N/A`	not current
MSACMT632A	Analyse cost implications of maintenance strategy	`N/A`	not current
MSACMT640A	Manage 5S system in a manufacturing environment	`N/A`	not current
MSACMT641A	Implement a continuous improvement system	`N/A`	not current
MSACMT650A	Determine and improve process capability	`N/A`	not current
MSACMT652A	Design an experiment	`N/A`	not current
MSACMT653A	Apply six sigma to process control and improvement	`N/A`	not current
MSACMT660A	Develop the application of enterprise systems in manufacturing	`N/A`	not current
MSACMT661A	Determine and establish information collection requirements and processes	`N/A`	not current
MSACMT662A	Develop a documentation control strategy for a manufacturing enterprise	`N/A`	not current
MSACMT670A	Develop and manage sustainable energy practices	`N/A`	not current
MSACMT671A	Develop and manage sustainable environmental practices	`N/A`	not current
MSACMT675A	Facilitate the development of a new product	`N/A`	not current
MSACMT681A	Develop a proactive maintenance strategy	`N/A`	not current
MSACMT682A	Adapt a proactive maintenance strategy to the process manufacturing sector	`N/A`	not current
MSACMT683A	Adapt a proactive maintenance strategy for a seasonal or cyclical manufacturing operation	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAENV472B	Implement and monitor environmentally sustainable work practices	`N/A`	not current
MSAENV672B	Develop workplace policy and procedures for environmental sustainability	`N/A`	not current
MSAPMSUP390A	Use structured problem solving tools	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MSA training product on the register · Search all training products

Is MSA41108 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.