When must new enrolments into PUA32310 stop?

New enrolments are not permitted from 15 March 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in PUA32310?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

PUA32310 Certificate III in Public Safety (Explosive Ordnance Manufacture)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

PUA32310Superseded — equivalentCertificate III in Public Safety (Explosive Ordnance Manufacture)
equivalent
DEF32312Superseded — equivalentCertificate III in Explosive Ordnance Manufacture
equivalent
DEF32115Superseded — equivalentCertificate III in Explosive Ordnance Manufacture
equivalent
DEF30220CurrentCertificate III in Explosive Ordnance Manufacture

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

PUA32307PUA32310equivalent10 February 2011
The register records this supersession but attaches no note on what changed.
PUA32310DEF32312equivalent14 March 2012
The register records this supersession but attaches no note on what changed.

Is PUA32310 on your scope?

This page is the register's record of one product. What it cannot tell you is whether PUA32310 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What PUA32310 is made of

training.gov.au lists 73 units for PUA32310. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 73 listed

Code	Unit	Core or elective	In this product
BSBCMN311B	Maintain workplace safety	`N/A`	not current
BSBSUS201A	Participate in environmentally sustainable work practices	`N/A`	not current
CPCCCM2004A	Handle construction materials	`N/A`	not current
CPCCOHS2001A	Apply OHS requirements, policies and procedures in the construction industry	`N/A`	not current
MSACMC210A	Manage the impact of change on own work	`N/A`	not current
MSACMC410A	Lead change in a manufacturing environment	`N/A`	not current
MSACMS200A	Apply competitive manufacturing practices	`N/A`	not current
MSACMS201A	Sustain process improvements	`N/A`	not current
MSACMS401A	Ensure process improvements are sustained	`N/A`	not current
MSACMT220A	Apply quick changeover procedures	`N/A`	not current
MSACMT221A	Apply Just in Time (JIT) procedures	`N/A`	not current
MSACMT230A	Apply cost factors to work practices	`N/A`	not current
MSACMT231A	Interpret product costs in terms of customer requirements	`N/A`	not current
MSACMT240A	Apply 5S procedures in a manufacturing environment	`N/A`	not current
MSACMT250A	Monitor process capability	`N/A`	not current
MSACMT251A	Apply quality standards	`N/A`	not current
MSACMT260A	Use planning software systems in manufacturing	`N/A`	not current
MSACMT261A	Use SCADA systems in manufacturing	`N/A`	not current
MSACMT270A	Use sustainable energy practices	`N/A`	not current
MSACMT271A	Use sustainable environmental practices	`N/A`	not current
MSACMT280A	Undertake root cause analysis	`N/A`	not current
MSACMT281A	Contribute to the application of a proactive maintenance strategy	`N/A`	not current
MSACMT421A	Facilitate a Just in Time (JIT) system	`N/A`	not current
MSACMT430A	Improve cost factors in work practices	`N/A`	not current
MSACMT432A	Analyse manual handling processes	`N/A`	not current
MSACMT440A	Lead 5S in a manufacturing environment	`N/A`	not current
MSACMT450A	Undertake process capability improvements	`N/A`	not current
MSACMT451A	Mistake proof a production process	`N/A`	not current
MSACMT452A	Apply statistics to processes in manufacturing	`N/A`	not current
MSACMT460A	Facilitate the use of planning software systems in manufacturing	`N/A`	not current

Show the remaining 43 units

Code	Unit	Core or elective	In this product
MSACMT461A	Facilitate SCADA systems in a manufacturing team or work area	`N/A`	not current
MSACMT481A	Undertake proactive maintenance analyses	`N/A`	not current
MSACMT482A	Assist in implementing a proactive maintenance strategy	`N/A`	not current
MSAPMOHS200A	Work safely	`N/A`	not current
MSAPMOHS210B	Undertake first response to non-fire incidents	`N/A`	not current
MSAPMOHS300A	Facilitate the implementation of OHS for a work group	`N/A`	not current
MSAPMSUP390A	Use structured problem solving tools	`N/A`	not current
PMAOHS310B	Investigate incidents	`N/A`	not current
PMAOPS201B	Operate fluid flow equipment	`N/A`	not current
PMAOPS300B	Operate a production unit	`N/A`	not current
PMAOPS305B	Operate process control systems	`N/A`	not current
PMAOPS307B	Transfer bulk fluids into/out of storage facility	`N/A`	not current
PUADEFCA301B	Shift loads manually utilising non-motorised equipment	`N/A`	not current
PUADEFEO101D	Work safely with explosive ordnance	`N/A`	not current
PUADEFEO201C	Respond to fire	`N/A`	not current
PUADEFEO203C	Dispose of non-explosive dangerous goods	`N/A`	not current
PUADEFEO206C	Apply a knowledge of the service environment	`N/A`	not current
PUADEFEO207C	Inspect explosive ordnance facilities	`N/A`	not current
PUADEFEO208C	Supervise explosive ordnance engineering and logistics processes	`N/A`	not current
PUADEFEO401D	Load and unload platforms	`N/A`	not current
PUADEFEO501D	Conduct explosive ordnance inspection	`N/A`	not current
PUADEFEO509D	Perform purging	`N/A`	not current
PUADEFEO716C	Test for explosive substances	`N/A`	not current
PUADEFEQ001C	Work with equity and diversity	`N/A`	not current
PUADEFOH013B	Enter confined space	`N/A`	not current
PUADEFOH014B	Test confined space environment	`N/A`	not current
PUADEFOH015B	Control entry to confined spaces	`N/A`	not current
PUADEFOH016B	Monitor and report on hazardous substances safety	`N/A`	not current
PUAEMR001B	Establish context and develop risk evaluation criteria	`N/A`	not current
PUAEMR002B	Identify, analyse and evaluate risk	`N/A`	not current
PUAEMR003B	Determine treatment strategies	`N/A`	not current
PUAEMR004B	Manage treatment strategy implementation	`N/A`	not current
PUAEMR005B	Design and manage activities which exercise elements of emergency management	`N/A`	not current
PUAEMR006B	Treat risk at an operational level	`N/A`	not current
PUAEMR007B	Conduct risk assessment	`N/A`	not current
PUAEMR009B	Facilitate emergency risk assessment	`N/A`	not current
TLIB607C	Carry out inspection of vehicles designed to carry special loads	`N/A`	not current
TLIC707C	Operate vehicle carrying special loads	`N/A`	not current
TLID107C	Shift materials safely using manual handling methods	`N/A`	not current
TLID1207C	Operate specialised load shifting equipment	`N/A`	not current
TLID1507D	Identify and label explosives and dangerous goods	`N/A`	not current
TLID1607D	Load and unload explosives and dangerous goods	`N/A`	not current
TLIF207C	Conduct housekeeping activities	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every PUA training product on the register · Search all training products

Is PUA32310 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.