When must new enrolments into MEM80112 stop?

New enrolments are not permitted from 19 December 2023 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in MEM80112?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MEM80112 Graduate Diploma of Engineering

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MEM80112Superseded — equivalentGraduate Diploma of Engineering
equivalent
MEM80122Superseded — equivalentGraduate Diploma of Engineering
equivalent
MEM80125CurrentGraduate Diploma of Engineering

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MEM80111MEM80112equivalent19 December 2012
The register records this supersession but attaches no note on what changed.
MEM80112MEM80122equivalent18 December 2022
The register records this supersession but attaches no note on what changed.

Is MEM80112 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEM80112 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MEM80112 is made of

training.gov.au lists 84 units for MEM80112. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 84 listed

Code	Unit	Core or elective	In this product
BSBLED705A	Plan and implement a mentoring program	`N/A`	not current
BSBLED706A	Plan and implement a coaching strategy	`N/A`	not current
BSBLED710A	Develop human capital	`N/A`	not current
BSBREL701A	Develop and cultivate collaborative partnerships and relationships	`N/A`	not current
MEM23063A	Select and test mechanical engineering materials	`N/A`	not current
MEM23064A	Select and test mechatronic engineering materials	`N/A`	not current
MEM23111A	Select electrical equipment and components for engineering applications	`N/A`	not current
MEM23112A	Investigate electrical and electronic controllers in engineering applications	`N/A`	not current
MEM23113A	Evaluate hydrodynamic systems and system components	`N/A`	not current
MEM23114A	Evaluate thermodynamic systems and components	`N/A`	not current
MEM23115A	Evaluate fluid power systems	`N/A`	not current
MEM23116A	Evaluate programmable logic controller and related control system component applications	`N/A`	not current
MEM23117A	Evaluate microcontroller applications	`N/A`	not current
MEM23118A	Apply production and service control techniques	`N/A`	not current
MEM23119A	Evaluate continuous improvement processes	`N/A`	not current
MEM23120A	Select mechanical machine and equipment components	`N/A`	not current
MEM23121A	Analyse loads on frames and mechanisms	`N/A`	not current
MEM23122A	Evaluate computer integrated manufacturing systems	`N/A`	not current
MEM23123A	Evaluate manufacturing processes	`N/A`	not current
MEM23124A	Measure and analyse noise and vibration	`N/A`	not current
MEM23125A	Evaluate maintenance systems	`N/A`	not current
MEM234001A	Plan and manage engineering-related projects or operations	`N/A`	not current
MEM234002A	Integrate engineering technologies	`N/A`	not current
MEM234003A	Design machines and ancillary equipment	`N/A`	not current
MEM234004A	Design for engineering-related noise and vibration mitigation	`N/A`	not current
MEM234005A	Design hydrodynamic pumping systems	`N/A`	not current
MEM234006A	Evaluate and select thermodynamic systems or subsystems	`N/A`	not current
MEM234007A	Design fluid power systems	`N/A`	not current
MEM234008A	Design plant using computer simulations	`N/A`	not current
MEM234009A	Design computer-integrated manufacturing systems	`N/A`	not current

Show the remaining 54 units

Code	Unit	Core or elective	In this product
MEM234010A	Design microcontroller applications	`N/A`	not current
MEM234011A	Design programmable logic controller applications	`N/A`	not current
MEM234012A	Design integrated maintenance management systems	`N/A`	not current
MEM234013A	Plan and design engineering-related manufacturing processes	`N/A`	not current
MEM234014A	Design a robotic system	`N/A`	not current
MEM234015A	Design hydronic heat exchanger systems	`N/A`	not current
MEM234016A	Design refrigeration systems	`N/A`	not current
MEM234017A	Design exhaust, ventilation and dust collection systems	`N/A`	not current
MEM234018A	Design heating, ventilation, air conditioning and refrigeration control systems	`N/A`	not current
MEM234019A	Apply finite element analysis in engineering design	`N/A`	not current
MEM234020A	Coordinate small lot manufacture using rapid manufacture processes	`N/A`	not current
MEM234021A	Apply statistics to technology problems	`N/A`	not current
MEM234022A	Apply advanced calculus to technology problems	`N/A`	not current
MEM234023A	Apply differential equations to technology problems	`N/A`	not current
MEM234024A	Apply advanced mathematics in technology problems	`N/A`	not current
MEM234025A	Apply numerical methods to technology problems	`N/A`	not current
MEM234026A	Develop and coordinate engineering-related contingency plans	`N/A`	not current
MEM234027A	Plan and manage materials supply for an engineering project or manufacturing operation	`N/A`	not current
MEM234028A	Produce and manage technical documentation	`N/A`	not current
MEM234029A	Produce and manage technical publications	`N/A`	not current
MEM234030A	Provide specialised technical and engineering guidance to other technical employees	`N/A`	not current
MEM234031A	Manage installation, commissioning or modification of machines and equipment	`N/A`	not current
MEM234032A	Manage fluid power related technologies in an enterprise	`N/A`	not current
MEM234033A	Lead engineering-related quality operations in an enterprise	`N/A`	not current
MEM234034A	Manage heating, ventilation, air conditioning and refrigeration systems or projects	`N/A`	not current
MEM234035A	Maintain and apply technical and engineering skills	`N/A`	not current
MSAENV672B	Develop workplace policy and procedures for environmental sustainability	`N/A`	not current
MSL976003A	Evaluate and select appropriate test methods and/or procedures	`N/A`	not current
MSS405007A	Introduce competitive systems and practices to a small or medium enterprise	`N/A`	not current
MSS405020A	Develop quick changeover procedures	`N/A`	not current
MSS405022A	Design a process layout	`N/A`	not current
MSS405023A	Develop a levelled pull system for operations and processes	`N/A`	not current
MSS405032A	Analyse cost implications of maintenance strategy	`N/A`	not current
MSS407001A	Prepare for and implement change	`N/A`	not current
MSS407002A	Review operations practice tools and techniques	`N/A`	not current
MSS407003A	Analyse process changes	`N/A`	not current
MSS407004A	Facilitate improvements in the internal value stream	`N/A`	not current
MSS407005A	Undertake a qualitative review of a process change	`N/A`	not current
MSS407006A	Build relationships between teams in an operations environment	`N/A`	not current
MSS407007A	Respond to a major non-conformance	`N/A`	not current
MSS407008A	Capture learning from daily activities in a organisation	`N/A`	not current
MSS407009A	Facilitate improvements in the external value stream	`N/A`	not current
MSS407010A	Improve visual management in the workplace	`N/A`	not current
MSS407011A	Manage benchmarking studies	`N/A`	not current
MSS407012A	Lead a problem solving process to determine and solve root cause	`N/A`	not current
MSS407013A	Review continuous improvement processes	`N/A`	not current
MSS408001A	Develop the competitive systems and practices approach	`N/A`	not current
MSS408002A	Audit the use of competitive tools	`N/A`	not current
MSS408003A	Develop models of future state operations practice	`N/A`	not current
MSS408004A	Develop the value stream	`N/A`	not current
MSS408005A	Develop the learning processes of the operations organisation	`N/A`	not current
MSS408006A	Develop and refine systems for continuous improvement in operations	`N/A`	not current
MSS408007A	Develop problem solving capability of an organisation	`N/A`	not current
MSS408008A	Analyse data for relevance to organisational learning	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEM training product on the register · Search all training products

Is MEM80112 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.