When must new enrolments into MSA10107 stop?

New enrolments are not permitted from 2 June 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in MSA10107?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MSA10107 Certificate I in Manufacturing (Pathways)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MSA10107Superseded — equivalentCertificate I in Manufacturing (Pathways)
equivalent
MSM10216CurrentCertificate I in Manufacturing (Pathways)

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MSA10107MSM10216equivalent1 June 2016
The register records this supersession but attaches no note on what changed.

Is MSA10107 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MSA10107 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MSA10107 is made of

training.gov.au lists 34 units for MSA10107. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 34 listed

Code	Unit	Core or elective	In this product
LMTCL2001B	Use a sewing machine	`N/A`	not current
LMTCL2003B	Identify fibres and fabrics	`N/A`	not current
LMTCL2006B	Press work	`N/A`	not current
LMTCL2007B	Lay up, mark and cut uncomplicated fabrics and lays	`N/A`	not current
LMTCL2008B	Finish garment production	`N/A`	not current
MEM03001B	Perform manual production assembly	`N/A`	not current
MEM05007C	Perform manual heating and thermal cutting	`N/A`	not current
MEM05012C	Perform routine manual metal arc welding	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18002B	Use power tools/hand held operations	`N/A`	not current
MSAPCI101A	Adapt to work in industry	`N/A`	not current
MSAPCI102A	Apply effective work practices	`N/A`	not current
MSAPCI103A	Demonstrate care and apply safe practices at work	`N/A`	not current
MSAPCII296A	Make a small furniture item from timber	`N/A`	not current
MSAPCII297A	Make an object from cloth using an existing pattern	`N/A`	not current
MSAPCII298A	Make an object from metal	`N/A`	not current
MSAPCII299A	Make an object from plastic	`N/A`	not current
MSAPMOPS100A	Use equipment	`N/A`	not current
MSAPMOPS101A	Make measurements	`N/A`	not current
MSAPMOPS102A	Perform tasks to support production	`N/A`	not current
MSAPMOPS244A	Layout and cut materials	`N/A`	not current
MSFFM1002	Operate basic woodworking machines	`N/A`	not current
MSFFM2001	Use furniture making sector hand and power tools	`N/A`	not current
MSFFM2002	Assemble furnishing components	`N/A`	not current
MSFFM2003	Select and apply hardware	`N/A`	not current
MSFFM2005	Join solid timber	`N/A`	not current
MSFSF1001	Produce basic soft furnishing accessories	`N/A`	not current
MSFSF2001	Cut single layer fabrics	`N/A`	not current
PMBFIN201C	Finish products and components	`N/A`	not current
PMBFIN205C	Hand decorate products	`N/A`	not current

Show the remaining 4 units

Code	Unit	Core or elective	In this product
PMBPREP205C	Assemble materials and equipment for production	`N/A`	not current
PMBPREP206C	Prepare materials to formulae	`N/A`	not current
PMBPROD236C	Operate hand held air/power equipment for production processes	`N/A`	not current
PMBPROD240C	Cut materials	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MSA training product on the register · Search all training products

Is MSA10107 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.