MSF20213 Certificate II in Furniture Finishing

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for MSF20213 ended on 6 December 2022 — 3 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 8 December 2023. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

For an ASQA-registered RTO that does not already hold it, adding MSF20122 to scope is a change-of-scope application to ASQA, with a fee set by law: A$200 application fee + A$1,100 assessment fee per application (up to 5 VET courses and 50 units of competency). RTOs registered by a state regulator, and ASQA delegates, sit under other arrangements. Source: NVR Fees Determination 2026, F2026L00814, from 1 July 2026 · read 5 September 2026.

Product type
Qualification
Training package
MSF — Furnishing Training Package
Currency period ends
6 December 2022
Latest release
Release 4 · 3 June 2022 · 4 releases in all
Supersedes
LMF20202
Superseded by
MSF20122 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. MSF20213Superseded — not equivalentCertificate II in Furniture Finishing
  2. not equivalent
  3. MSF20122CurrentCertificate II in Furnishing

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • LMF20202MSF20213equivalent9 December 2013

    The register records this supersession but attaches no note on what changed.

  • MSF20213MSF20122not equivalent7 December 2022

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for MSF20213 and for its training package MSF (release 9.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is MSF20213 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MSF20213 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MSF20213 is made of

training.gov.au lists 14 units for MSF20213: 8 core and 6 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 8 listed

CodeUnitIn this product
MSFFF2001Use furniture finishing sector hand and power toolsnot current
MSFFF2003Remove surface coatingsnot current
MSFGN2001Make measurements and calculationsnot current
MSMENV272Participate in environmentally sustainable work practicescurrent
MSMSUP102Communicate in the workplacecurrent
MSMSUP106Work in a teamcurrent
MSMWHS100Follow WHS procedurescurrent
TLID2003Handle dangerous goods/hazardous substancesnot current

Elective units 6 listed

CodeUnitIn this product
MSFFF2002Dismantle and re-assemble furniturenot current
MSFFF2004Prepare surfaces for finishingnot current
MSFFF2005Maintain spray equipment and boothnot current
MSFFF2006Apply surface coatings by spray gunnot current
MSFFF2007Apply stains, fillers and bleachnot current
MSFFF2008Apply surface coatings by handnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MSF training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is MSF20213 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.