Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Official documents on the register
What training.gov.au lists for MSF31213 and for its training package MSF (release 9.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.
Is MSF31213 on your scope?
This page is the register's record of one product. What it cannot tell you is whether MSF31213 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What MSF31213 is made of
training.gov.au lists 33 units for MSF31213: 5 core and 28 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 5 listed
Elective units 28 listed
| Code | Unit | In this product |
|---|---|---|
| MSFFF2008 | Apply surface coatings by hand | !not current |
| MSFFF3005 | Enhance finishes | !not current |
| MSFFF3006 | Repair and touch up surfaces | !not current |
| MSFFF3008 | Apply traditional French polishing techniques | !not current |
| MSFFM2002 | Assemble furnishing components | !not current |
| MSFFM2006 | Hand make timber joints | !not current |
| MSFFM2010 | Set up and operate basic static machines | !not current |
| MSFGN2002 | Move and store materials and products | ●current |
| MSFGN3001 | Read and interpret work documents | !not current |
| MSFGN3002 | Estimate and cost job | !not current |
| MSFPT3001 | Apply piano industry knowledge and work techniques | !not current |
| MSFPT3002 | Select materials for piano repair and manufacture | !not current |
| MSFPT3003 | Repair upright and grand piano actions, keys and pedals | !not current |
| MSFPT3004 | Rebuild upright and grand piano actions, keys and pedals | !not current |
| MSFPT3005 | Re-string and re-pin a piano | !not current |
| MSFPT3006 | Regulate actions, keys and pedals of upright pianos | !not current |
| MSFPT3007 | Regulate actions, keys and pedals of grand pianos | !not current |
| MSFPT3008 | Apply piano tuning theory and basic acoustics | !not current |
| MSFPT3009 | Develop control of tuning hammers | !not current |
| MSFPT3010 | Pitch raise a piano | !not current |
| MSFPT3011 | Tune unisons aurally to a beatless condition | !not current |
| MSFPT3012 | Tune octaves aurally to appropriate stretch | !not current |
| MSFPT3013 | Tune a temperament octave to produce an equally tempered scale | !not current |
| MSFPT3014 | Tune a piano aurally and electronically within time and accuracy constraints | !not current |
| MSFPT3015 | Voice a piano | !not current |
| MSFPT3016 | Provide advice to customers on piano tuning and repair | !not current |
| TLID0019 | Shift loads using manually-operated equipment | ●current |
| TLID0021 | Store and handle dangerous goods and hazardous substances | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MSF training product on the register · Search all training products
Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.
No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.
Is MSF31213 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.