MSL30118 Certificate III in Laboratory Skills

Supersededtraining.gov.au: supersededEquivalent

The currency period for MSL30118 ended on 18 December 2022 — 3 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 20 December 2023 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
MSL — Laboratory Operations
Currency period ends
18 December 2022
Latest release
Release 2 · 19 April 2021 · 2 releases in all
Supersedes
MSL30116
Superseded by
MSL30122 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. MSL30118Superseded — equivalentCertificate III in Laboratory Skills
  2. equivalent
  3. MSL30122CurrentCertificate III in Laboratory Skills

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • MSL30116MSL30118equivalent19 July 2018

    The register records this supersession but attaches no note on what changed.

  • MSL30118MSL30122equivalent19 December 2022

    The register records this supersession but attaches no note on what changed.

Is MSL30118 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MSL30118 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MSL30118 is made of

training.gov.au lists 52 units for MSL30118: 6 core and 46 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 6 listed

CodeUnitIn this product
MSL913003Communicate with other peoplenot current
MSL913004Plan and conduct laboratory/field workcurrent
MSL922001Record and present datanot current
MSL933006Contribute to the achievement of quality objectivesnot current
MSL943004Participate in laboratory or field workplace safetycurrent
MSMENV272Participate in environmentally sustainable work practicescurrent

Elective units 46 listed

CodeUnitIn this product
MSL904002Perform standard calibrationsnot current
MSL912001Work within a laboratory or field workplace (induction)not current
MSL914002Prepare practical science classes and demonstrationscurrent
MSL924003Process and interpret datanot current
MSL924004Use laboratory application softwarenot current
MSL933005Maintain the laboratory/field workplace fit for purposecurrent
MSL933007Apply critical control point requirementscurrent
MSL933008Perform calibration checks on equipment and assist with its maintenancecurrent
MSL934005Contribute to the ongoing development of HACCP plansnot current
MSL934006Apply quality system and continuous improvement processesnot current
MSL934007Maintain and control stocksnot current
MSL943003Work safely with instruments that emit ionising radiationcurrent
MSL944002Maintain laboratory or field workplace safetycurrent
MSL952001Collect routine site samplesnot current
MSL952002Handle and transport samples or equipmentnot current
MSL953003Receive and prepare samples for testingnot current
MSL953004Operate a robotic sample preparation systemcurrent
MSL954004Obtain representative samples in accordance with sampling plannot current
MSL954005Prepare mineral samples for analysiscurrent
MSL972001Conduct routine site measurementsnot current
MSL973013Perform basic testsnot current
MSL973014Prepare working solutionsnot current
MSL973015Prepare culture mediacurrent
MSL973016Perform aseptic techniquesnot current
MSL973017Assist with fieldworkcurrent
MSL973018Prepare trial batches for evaluationcurrent
MSL973019Perform microscopic examinationnot current
MSL973020Perform histological proceduresnot current
MSL973021Conduct field-based acceptance tests for construction materialscurrent
MSL973022Conduct laboratory-based acceptance tests for construction materialscurrent
Show the remaining 16 elective units
CodeUnitIn this product
MSL973023Perform fire pouring techniquescurrent
MSL973024Perform site investigation activitiescurrent
MSL974016Perform physical and mechanical testscurrent
MSL974017Prepare, standardise and use solutionsnot current
MSL974018Conduct geotechnical site investigationscurrent
MSL974019Perform chemical tests and proceduresnot current
MSL974020Perform food testsnot current
MSL974021Perform biological proceduresnot current
MSL974022Undertake environmental field-based monitoringcurrent
MSL974023Capture and manage scientific imagescurrent
MSL974025Prepare tissue and cell culturesnot current
MSL974026Perform tests to determine the properties of construction materialscurrent
MSL974028Classify soilscurrent
MSL974029Operate an automated mineral analysis systemcurrent
MSMENV472Implement and monitor environmentally sustainable work practicescurrent
TAEDEL301Provide work skill instructionnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MSL training product on the register · Search all training products

Is MSL30118 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.