Where the register points next
training.gov.au points at nothing after MST40316: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is MST40316 on your scope?
This page is the register's record of one product. What it cannot tell you is whether MST40316 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What MST40316 is made of
training.gov.au lists 45 units for MST40316: 9 core and 29 elective, and 7 units it marks neither. To complete it, the register publishes a rule of 9 core units plus 16 electives — 25 units in all.
Core units 9 listed
| Code | Unit | In this product |
|---|---|---|
| MSMENV272 | Participate in environmentally sustainable work practices | ●current |
| MSMWHS200 | Work safely | ●current |
| MSS402051 | Apply quality standards | !not current |
| MSTFP2001 | Identify materials used in footwear production | ●current |
| MSTFP4001 | Develop design for custom-made footwear | ●current |
| MSTFP4002 | Make patterns for custom-made footwear | ●current |
| MSTFP4003 | Prepare, cut and sew custom-made shoe components | ●current |
| MSTFP4004 | Assemble and finish custom-made shoe | ●current |
| MSTFP4005 | Fit custom-made footwear | ●current |
Elective units 29 listed
| Code | Unit | In this product |
|---|---|---|
| MSMSUP106 | Work in a team | ●current |
| MSTFD4003 | Assist in preparation of preliminary design concepts | !not current |
| MSTFD4014 | Identify influences on contemporary fashion designs and construction techniques | !not current |
| MSTFP2002 | Perform stuff cutting | ●current |
| MSTFP2003 | Cut printed materials by machine | ●current |
| MSTFP2004 | Cut non-printed leather by machine | ●current |
| MSTFP2005 | Operate machine to sew upper | ●current |
| MSTFP2006 | Machine upper according to product requirements | ●current |
| MSTFP2007 | Last shoe by machine | ●current |
| MSTFP2008 | Perform moulding operations | ●current |
| MSTFP2009 | Perform footwear finishing operations | ●current |
| MSTFP2010 | Repair footwear product | ●current |
| MSTFP2011 | Perform table-based operations | ●current |
| MSTFP3001 | Cut leather by hand | ●current |
| MSTFP3002 | Hand last shoe | ●current |
| MSTFP3003 | Assemble shoe by hand | ●current |
| MSTGN2014 | Operate computing technology in a TCF workplace | ●current |
| MSTGN2020 | Perform test or inspection to check product quality | ●current |
| MSTGN2021 | Select, transfer and remove materials and products | ●current |
| MSTGN2022 | Perform tasks to support production | ●current |
| MSTGN2024 | Perform minor maintenance | ●current |
| MSTGN3009 | Coordinate work of team or section | ●current |
| MSTGN3013 | Control production in a section of a TCF enterprise | ●current |
| MSTGN3014 | Organise and plan own work to achieve planned outcomes | ●current |
| MSTGN4010 | Implement and monitor WHS and environmental systems in the workplace | ●current |
| MSTGN4015 | Coordinate or set-up machines for product change | ●current |
| MSTGN4016 | Coordinate the quality system and procedures | ●current |
| MSTLG2007 | Skive leather pieces | ●current |
| MSTLG3005 | Grade leather | ●current |
Units the register marks neither core nor elective 7 listed
| Code | Unit | Core or elective | In this product |
|---|---|---|---|
| MSTAT3001 | Produce technical drawings of garments | N/A | ●current |
| MSTGN3019 | Interact with others in an apparel and textile design and production environment | N/A | ●current |
| MSTGN3023 | Estimate and cost jobs | N/A | ●current |
| MSTGN3025 | Draw 3D designs | N/A | ●current |
| MSTGN4017 | Participate in product engineering | N/A | ●current |
| MSTGN4019 | Plan and implement production within a work area | N/A | ●current |
| MSTGN4020 | Contribute to the development of products or processes | N/A | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MST training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day MST40316 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.