PMC20204 Certificate II in Production Support

Where the register points next

training.gov.au does not publish a supersession path from PMC20204. There is no chain to follow from here.

What the register says changed

training.gov.au publishes no mapping notes for PMC20204.

Is PMC20204 on your scope?

This page is the register's record of one product. What it cannot tell you is whether PMC20204 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What PMC20204 is made of

training.gov.au lists 70 units for PMC20204. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 70 listed

Code	Unit	Core or elective	In this product
PMAOHS100B	Follow OHS procedures	`N/A`	not current
PMAOHS200B	Participate in workplace OHS procedures	`N/A`	not current
PMAOPS212A	Use enterprise data system	`N/A`	not current
PMAOPS216A	Operate local control system	`N/A`	not current
PMAPER200C	Work in accordance with an issued permit	`N/A`	not current
PMAPER201C	Monitor and control work permits	`N/A`	not current
PMAPER205B	Enter confined space	`N/A`	not current
PMASUP100B	Apply workplace procedures	`N/A`	not current
PMASUP110A	Relay and respond to information	`N/A`	not current
PMASUP120A	Follow environmental work practices	`N/A`	not current
PMASUP200B	Implement production efficiencies	`N/A`	not current
PMASUP210A	Process and record information	`N/A`	not current
PMASUP220A	Monitor and control environmental hazards	`N/A`	not current
PMBPROD230B	Monitor process operations	`N/A`	not current
PMCCOR102A	Clean plant and equipment	`N/A`	not current
PMCOPS205B	Process greenware/green products	`N/A`	not current
PMCOPS206B	Operate an autoclave	`N/A`	not current
PMCOPS207A	Heat accelerate the curing of precast concrete	`N/A`	not current
PMCOPS208A	Operate crushing equipment	`N/A`	not current
PMCOPS210B	Operate a Calcining kiln	`N/A`	not current
PMCOPS220B	Operate slip casting equipment	`N/A`	not current
PMCOPS221B	Operate manual glazing equipment	`N/A`	not current
PMCOPS222B	Prepare materials for clay and ceramic production	`N/A`	not current
PMCOPS223B	Finish products after firing	`N/A`	not current
PMCOPS224B	Hand mould products	`N/A`	not current
PMCOPS230B	Operate a firing kiln	`N/A`	not current
PMCOPS231B	Operate extrusion equipment	`N/A`	not current
PMCOPS232B	Operate pressing equipment	`N/A`	not current
PMCOPS240B	Operate melting process	`N/A`	not current
PMCOPS241B	Operate process ovens	`N/A`	not current

Show the remaining 40 units

Code	Unit	Core or elective	In this product
PMCOPS242B	Operate blown insulation equipment	`N/A`	not current
PMCOPS243B	Operate float forming equipment	`N/A`	not current
PMCOPS244B	Operate fibre forming equipment	`N/A`	not current
PMCOPS245B	Operate container forming equipment	`N/A`	not current
PMCOPS246B	Operate glass printing equipment	`N/A`	not current
PMCOPS247B	Operate primary annealing equipment	`N/A`	not current
PMCOPS248B	Operate glass finishing equipment	`N/A`	not current
PMCOPS249B	Operate on-line stacking and assembly equipment	`N/A`	not current
PMCOPS250B	Schedule, cut and bend reinforcement	`N/A`	not current
PMCOPS251B	Finish green concrete products	`N/A`	not current
PMCOPS252B	Cast moulded concrete products	`N/A`	not current
PMCOPS253B	Finish cured concrete products	`N/A`	not current
PMCOPS254B	Spin concrete pipes	`N/A`	not current
PMCOPS255B	Conduct benching operations	`N/A`	not current
PMCOPS256A	Assemble, fabricate and place reinforcement	`N/A`	not current
PMCOPS257A	Finish casting operation	`N/A`	not current
PMCOPS258A	Demould concrete products	`N/A`	not current
PMCOPS260B	Batch mix concrete	`N/A`	not current
PMCOPS261B	Deliver concrete to site	`N/A`	not current
PMCOPS265A	Prepare asphalt	`N/A`	not current
PMCOPS270A	Operate forming equipment	`N/A`	not current
PMCOPS271A	Operate wet and dry end equipment	`N/A`	not current
PMCOPS272A	Produce fibrous plasterboard	`N/A`	not current
PMCOPS290A	Use and maintain tools and equipment for refractory operations	`N/A`	not current
PMCOPS291A	Prepare for, install and repair refractory brickwork/blockwork	`N/A`	not current
PMCOPS292A	Prepare for and install mouldable refractory materials	`N/A`	not current
PMCOPS293A	Prepare for and cast refractory materials	`N/A`	not current
PMCOPS294A	Prepare for and apply shotcrete for installation	`N/A`	not current
PMCOPS295A	Prepare for, install and repair ceramic fibre	`N/A`	not current
PMCSUP270A	Move materials	`N/A`	not current
PMCSUP271B	Operate bulk materials handling equipment	`N/A`	not current
PMCSUP272A	Identify and act upon hazards in the workplace	`N/A`	not current
PMCSUP273A	Receive and despatch materials	`N/A`	not current
PMCSUP274B	Undertake minor maintenance	`N/A`	not current
PMCSUP275A	Maintain kiln refractory	`N/A`	not current
PMCSUP280A	Manage conflict at work	`N/A`	not current
PMCSUP281A	Deliver customer service	`N/A`	not current
PMCSUP282A	Use computers and related programs in the workplace	`N/A`	not current
PMCSUP283B	Allocate and complete team tasks	`N/A`	not current
PMCSUP292A	Sample and test materials and product	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every PMC training product on the register · Search all training products

Is PMC20204 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.