PMCOPS231B Operate extrusion equipment

Supersededtraining.gov.au: supersededEquivalent

The currency period for PMCOPS231B ended on 28 April 2010 — 16 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 30 April 2011 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
PMC04 — Manufactured Mineral Products Training Package (Superseded by PMC10)
Currency period ends
28 April 2010
Latest release
Release 1 · 1 January 2004
Supersedes
nothing — no earlier product listed
Superseded by
PMC552031C equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. PMCOPS231BSuperseded — equivalentOperate extrusion equipment
  2. equivalent
  3. PMC552031CSuperseded — equivalentOperate extrusion equipment
  4. equivalent
  5. PMC552031Deleted from the registerOperate extrusion equipment

The register does not list a current endpoint for this chain: PMC552031 is the last product it points at, and PMC552031 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

Is PMCOPS231B on your scope?

This page is the register's record of one product. What it cannot tell you is whether PMCOPS231B sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where PMCOPS231B is used

training.gov.au lists PMCOPS231B inside 2 training products, none of them current. Every one of them is below, with the register's own core or elective flag for PMCOPS231B in that product.

Products no longer current 2 listed

The register still records PMCOPS231B inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypePMCOPS231B is
PMC20104Certificate II in Manufactured Mineral ProductsQualificationelective
PMC20204Certificate II in Production SupportQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every PMC training product on the register · Search all training products

Is PMCOPS231B still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.