PMC70110 Graduate Certificate in Refractories Engineering

Supersededtraining.gov.au: supersededEquivalent

The currency period for PMC70110 ended on 20 June 2016 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 22 June 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
PMC10 — Manufactured Mineral Products
Currency period ends
20 June 2016
Latest release
Release 2 · 29 April 2014 · 2 releases in all
Supersedes
nothing — no earlier product listed
Superseded by
PMC80116 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. PMC70110Superseded — equivalentGraduate Certificate in Refractories Engineering
  2. equivalent
  3. PMC80116Deleted from the registerGraduate Certificate in Refractories Engineering

The register does not list a current endpoint for this chain: PMC80116 is the last product it points at, and PMC80116 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • PMC70110PMC80116equivalent21 June 2016

    The register records this supersession but attaches no note on what changed.

Is PMC70110 on your scope?

This page is the register's record of one product. What it cannot tell you is whether PMC70110 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What PMC70110 is made of

training.gov.au lists 17 units for PMC70110. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 17 listed

CodeUnitCore or electiveIn this product
MSAENV672BDevelop workplace policy and procedures for environmental sustainabilityN/Anot current
MSAPMOHS200AWork safelyN/Anot current
MSL916005AManage complex projectsN/Anot current
MSS407002AReview operations practice tools and techniquesN/Anot current
MSS407007ARespond to a major non-conformanceN/Anot current
MSS407012ALead a problem solving process to determine and solve root causeN/Anot current
MSS407013AReview continuous improvement processesN/Anot current
PMC557001AManage trialsN/Anot current
PMC557090ASelect refractory materials for an applicationN/Anot current
PMC557091ADesign a refractory liningN/Anot current
PMC557092ASpecify and interpret refractory testsN/Anot current
PMC557093ADesign a refractory/ceramic componentN/Anot current
PMC557094AInvestigate refractory failuresN/Anot current
PMC557095ASpecify and monitor the installation of monolithic/castable refractoriesN/Anot current
PMC557096ASpecify and monitor the installation of block/precast refractoriesN/Anot current
PMC557097ASpecify and monitor repairs to refractory installationsN/Anot current
PMC557098ASpecify refractory installation systemsN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every PMC training product on the register · Search all training products

Is PMC70110 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.