PRM30104 Certificate III in Asset Maintenance (Cleaning Operations)

Supersededtraining.gov.au: supersededEquivalent

The currency period for PRM30104 ended on 8 January 2012 — 14 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 10 January 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
PRM04 — ASSET MAINTENANCE TRAINING PACKAGE
Currency period ends
8 January 2012
Latest release
Release 1 · 30 March 2009
Supersedes
nothing — no earlier product listed
Superseded by
CPP31011 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. PRM30104Superseded — equivalentCertificate III in Asset Maintenance (Cleaning Operations)
  2. equivalent
  3. CPP31011Superseded — equivalentCertificate III in Cleaning Operations
  4. equivalent
  5. CPP30316Superseded — not equivalentCertificate III in Cleaning Operations
  6. not equivalent
  7. CPP30321CurrentCertificate III in Cleaning Operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • PRM30104CPP31011equivalent9 January 2012

    The register records this supersession but attaches no note on what changed.

Is PRM30104 on your scope?

This page is the register's record of one product. What it cannot tell you is whether PRM30104 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What PRM30104 is made of

training.gov.au lists 41 units for PRM30104. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 41 listed

CodeUnitCore or electiveIn this product
HLTFA301BApply first aidN/Anot current
HLTIN301AComply with infection control policies and procedures in health workN/Anot current
HLTIN403BImplement and monitor infection control policy and proceduresN/Anot current
MTMP2192AClean carcase hanging equipmentN/Anot current
MTMP2196BOverview cleaning programN/Anot current
MTMP2197BClean after operations - boning roomN/Anot current
MTMP2198BClean after operations - slaughter floorN/Anot current
MTMPS201BClean work area during operationsN/Anot current
MTMPS205BClean chillersN/Anot current
PRMCC01AUse hot water extractionN/Anot current
PRMCC02AUse bonnet cleaningN/Anot current
PRMCC03AUse dry foam shampooN/Anot current
PRMCC04AUse dry absorbent compoundN/Anot current
PRMCC05AUse wet foam shampooN/Anot current
PRMCC07APerform basic stain removalN/Anot current
PRMCL01BMaintain a hard floor surfaceN/Anot current
PRMCL02BRestore a hard floor surfaceN/Anot current
PRMCL03BReplace a hard floor finishN/Anot current
PRMCL04BMaintain a carpeted floorN/Anot current
PRMCL09BClean glass surfacesN/Anot current
PRMCL10BClean ceiling surfaces and fittingsN/Anot current
PRMCL13BClean window coveringsN/Anot current
PRMCL14BMaintain a clean room' environmentN/Anot current
PRMCL15BMaintain furniture and fittings and room dressingN/Anot current
PRMCL16BWash furniture and fittingsN/Anot current
PRMCL17BClean a wet areaN/Anot current
PRMCL19BRemove wasteN/Anot current
PRMCL20BClean using pressure washingN/Anot current
PRMCL21BClean industrial machineryN/Anot current
PRMCL33BPlan for safe and efficient cleaning activitiesN/Anot current
Show the remaining 11 units
CodeUnitCore or electiveIn this product
PRMCL35BMaintain a cleaning storage areaN/Anot current
PRMCL36BClean at high levelsN/Anot current
PRMCL37AClean external surfacesN/Anot current
PRMCL38AClean a food handling areaN/Anot current
PRMCL39ASupport leadership in the workplaceN/Anot current
PRMCMN201AParticipate in workplace safety arrangementsN/Anot current
PRMCMN202AProvide effective client serviceN/Anot current
PRMCMN301AContribute to workplace safety arrangementsN/Anot current
PRMCMN302ARespond to client inquiries and complaintsN/Anot current
SITHACS005APrepare rooms for guestsN/Anot current
TAADEL301CProvide training through instruction and demonstration of work skillsN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every PRM training product on the register · Search all training products

Is PRM30104 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.