Can an RTO still enrol new students in PUA20601?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 13 March 2014. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in PUA20601?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

PUA20601 Certificate II in Public Safety (Firefighting and Emergency…

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

PUA20601Superseded — equivalentCertificate II in Public Safety (Firefighting and Emergency Operations)
equivalent
PUA20613Superseded — equivalentCertificate II in Public Safety (Firefighting and Emergency Operations)
equivalent
PUA20619Superseded — equivalentCertificate II in Public Safety (Firefighting and Emergency Operations)
equivalent
PUA20622CurrentCertificate II in Public Safety (Firefighting and Emergency Operations)

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

PUA20601PUA20613equivalent12 March 2013
New units added. Pre-requisites updated. Imported units updated.

Official documents on the register

What training.gov.au lists for PUA20601 and for its training package PUA00 (release 8.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

PUA20601_R1.pdfPUA20601 release 1 · product document · published 24 September 2012
PUA20601_R1.docxPUA20601 release 1 · product document · published 26 November 2024

Is PUA20601 on your scope?

This page is the register's record of one product. What it cannot tell you is whether PUA20601 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What PUA20601 is made of

training.gov.au lists 26 units for PUA20601. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 26 listed

Code	Unit	Core or elective	In this product
PUACOM001C	Communicate in the workplace	`N/A`	not current
PUACOM002B	Provide services to clients	`N/A`	not current
PUAEME001B	Provide emergency care	`N/A`	not current
PUAEQU001B	Prepare, maintain and test response equipment	`N/A`	not current
PUAFIR201B	Prevent injury	`N/A`	not current
PUAFIR202B	Respond to isolated/remote structure fire	`N/A`	not current
PUAFIR203B	Respond to urban fire	`N/A`	not current
PUAFIR204B	Respond to wildfire	`N/A`	not current
PUAFIR205B	Respond to aviation incident (specialist)	`N/A`	not current
PUAFIR206B	Check installed fire safety systems	`N/A`	not current
PUAFIR207B	Operate breathing apparatus open circuit	`N/A`	not current
PUAFIR208B	Participate in community safety activities	`N/A`	not current
PUAFIR209B	Work safely around aircraft	`N/A`	not current
PUAFIR210B	Undertake hover-exit operations from helicopter	`N/A`	not current
PUAFIR211B	Undertake helicopter winch operations	`N/A`	not current
PUAFIR212B	Rappel from helicopter	`N/A`	not current
PUALAW001B	Protect and preserve incident scene	`N/A`	not current
PUAOHS001C	Follow defined occupational health and safety policies and procedures	`N/A`	not current
PUAOPE002B	Operate communications systems and equipment	`N/A`	not current
PUAOPE013A	Operate communications systems and equipment	`N/A`	not current
PUASAR001B	Participate in a rescue operation	`N/A`	not current
PUASAR008B	Search as a member of a land search team	`N/A`	not current
PUASAR022A	Participate in a rescue operation	`N/A`	not current
PUASAR023A	Participate in an urban search and rescue Category 1	`N/A`	not current
PUATEA001B	Work in a team	`N/A`	not current
PUATEA004D	Work effectively in a public safety organisation	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every PUA training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is PUA20601 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.