Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Official documents on the register
What training.gov.au lists for RII30313 and for its training package RII (release 11.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.
Is RII30313 on your scope?
This page is the register's record of one product. What it cannot tell you is whether RII30313 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What RII30313 is made of
training.gov.au lists 64 units for RII30313: 6 core and 58 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 6 listed
| Code | Unit | In this product |
|---|---|---|
| RIICOM302D | Communicate workplace information | ●current |
| RIIENV302D | Apply environmentally sustainable work practices | !not current |
| RIIMEX302D | Assess ground conditions | ●current |
| RIIQUA201D | Maintain and monitor site quality standards | !not current |
| RIIRIS301D | Apply risk management processes | !not current |
| RIIWHS201D | Work safely and follow WHS policies and procedures | !not current |
Elective units 58 listed
| Code | Unit | In this product |
|---|---|---|
| BSBFLM305C | Support operational plan | !not current |
| BSBINN301A | Promote innovation in a team environment | !not current |
| MSAPMPER300C | Issue work permits | !not current |
| RIIBEF301D | Run on-site operations | ●current |
| RIIBEF302D | Monitor site production activities | !not current |
| RIIBEF401D | Manage non-routine, complex technical situations | !not current |
| RIIBHD302D | Conduct underground development drilling | !not current |
| RIIBHD303D | Conduct long hole drilling | !not current |
| RIIBLA303D | Conduct underground development shotfiring | !not current |
| RIIBLA304D | Conduct underground production shotfiring | !not current |
| RIIBLA305D | Conduct secondary blasting | !not current |
| RIIBLA306D | Conduct accretion firing | !not current |
| RIIERR203D | Escape from hazardous situations unaided | !not current |
| RIIERR204D | Provide aided rescue to endangered personnel | !not current |
| RIIERR302D | Respond to local emergencies and incidents | !not current |
| RIIHAN304D | Conduct slewing crane operations | !not current |
| RIIHAN306D | Carry out lifting using multiple cranes | !not current |
| RIIHAN309D | Conduct telescopic materials handler operations | !not current |
| RIIHAN310D | Conduct crane operations underground | !not current |
| RIIHAN311D | Conduct operations with integrated tool carrier | !not current |
| RIIMPG301D | Control and monitor automated plant/machinery | ●current |
| RIIMPO307D | Conduct wheel grader operations in underground mines | !not current |
| RIIMPO333D | Conduct underground load haul dump operations | !not current |
| RIIMPO334D | Conduct skid steer loader operations using attachments | !not current |
| RIIMPO335D | Conduct skid steer loader operations without attachments | !not current |
| RIINHB307D | Conduct conventional core drilling | ●current |
| RIINHB310D | Conduct surface directional drilling | ●current |
| RIINHB312D | Conduct raise boring | ●current |
| RIIRIS202D | Respond to site based spills | !not current |
| RIISAM202D | Isolate and access plant | !not current |
Show the remaining 28 elective units
| Code | Unit | In this product |
|---|---|---|
| RIISAM306D | Service and maintain conveyors, feeders and hoppers | !not current |
| RIISAM307D | Service and maintain crushers | !not current |
| RIISAM311D | Maintain winder equipment | !not current |
| RIISAM312D | Inspect and maintain shafts and structures | !not current |
| RIISAM313D | Monitor, inspect and service ropes and attachments | !not current |
| RIISRM302D | Conduct stockpile reclaiming operations | !not current |
| RIISTD301D | Take environmental samples and measurements | ●current |
| RIIUMM301D | Conduct wet filling activities | !not current |
| RIIUMM302D | Install sets | !not current |
| RIIUMM303D | Conduct hand held mining | ●current |
| RIIUMM304D | Construct and maintain underground roads | ●current |
| RIIUMM305D | Install and remove a secondary fan | ●current |
| RIIUMM306D | Conduct mechanical scaling | ●current |
| RIIUMM307D | Maintain underground stockpiles | ●current |
| RIIUND205D | Respond to a workforce incident | !not current |
| RIIUND301D | Operate manual winder | !not current |
| RIIUND302D | Conduct cage operations | !not current |
| RIIUND303D | Operate winder for shaft sinking | !not current |
| RIIUND305D | Recover underground equipment | ●current |
| RIIUND306D | Conduct line of sight remote operations | !not current |
| RIIUND307D | Conduct tele-remote operations | ●current |
| RIIUND308D | Conduct control room operations | !not current |
| RIIUND309D | Conduct mechanical underground ground support drilling and installation | ●current |
| RIIUND310D | Apply shot-crete underground | !not current |
| RIIVEH301D | Conduct rail haulage operations | !not current |
| RIIVEH306D | Operate mine service vehicle | !not current |
| RIIWHS301D | Conduct safety and health investigations | !not current |
| TLILIC3008A | Licence to operate a slewing mobile crane (up to 20 tonnes) | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every RII training product on the register · Search all training products
Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.
No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.
Is RII30313 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.