RII32013 Certificate III in Drilling Oil/Gas (On shore)

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for RII32013 ended on 12 December 2015 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 14 December 2016 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
RII — Resources and Infrastructure Industry Training Package
Currency period ends
12 December 2015
Latest release
Release 3 · 7 December 2014 · 3 releases in all
Supersedes
RII32009
Superseded by
RII32015 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. RII32013Superseded — not equivalentCertificate III in Drilling Oil/Gas (On shore)
  2. not equivalent
  3. RII32015Superseded — equivalentCertificate III in Drilling Oil/Gas (On shore)
  4. equivalent
  5. RII32018Superseded — equivalentCertificate III in Drilling Oil/Gas (Onshore)
  6. equivalent
  7. RII32020Superseded — equivalentCertificate III in Drilling Oil & Gas (Onshore)
  8. equivalent
  9. RII32026CurrentCertificate III in Drilling Oil and Gas (Onshore)

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • RII32009RII32013not equivalent13 November 2013

    The register records this supersession but attaches no note on what changed.

  • RII32013RII32015not equivalent13 December 2015

    The register records this supersession but attaches no note on what changed.

Is RII32013 on your scope?

This page is the register's record of one product. What it cannot tell you is whether RII32013 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What RII32013 is made of

training.gov.au lists 19 units for RII32013: 10 core and 9 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 10 listed

CodeUnitIn this product
BSBFLM303CContribute to effective workplace relationshipsnot current
BSBWHS301AMaintain workplace safetynot current
MSAPMSUP172AIdentify and minimise environmental hazardsnot current
RIIERR302DRespond to local emergencies and incidentsnot current
RIIOGD209DOperate and maintain ancillary equipmentnot current
RIIOGD301DConduct and maintain derrick operationsnot current
RIIOGD302DTrip casingnot current
RIIOGD303DTrip pipenot current
RIIOGN302DOperate mud pumpsnot current
RIIOGN303DOperate mud systemsnot current

Elective units 9 listed

CodeUnitIn this product
MSAPMPER300CIssue work permitsnot current
PMASUP236BOperate vehicles in the fieldnot current
RIIOGD203DPrepare and operate drilling fluid systemsnot current
RIIOGD205DSupport blow out prevention operationsnot current
RIIOGD206DAssist with coal seam gas controlnot current
RIISAM204DOperate small plant and equipmentnot current
RIIWHS202DEnter and work in confined spacesnot current
RIIWHS204DWork safely at heightsnot current
TAEDEL301AProvide work skill instructionnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every RII training product on the register · Search all training products

Is RII32013 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.