When must new enrolments into RII40809 stop?

New enrolments are not permitted from 14 November 2014 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in RII40809?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

RII40809 Certificate IV in Civil Construction Design

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

RII40809Superseded — equivalentCertificate IV in Civil Construction Design
equivalent
RII40813Superseded — equivalentCertificate IV in Civil Construction Design
equivalent
RII40815Superseded — equivalentCertificate IV in Civil Construction Design
equivalent
RII40820CurrentCertificate IV in Civil Construction Design

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

RII40809RII40813equivalent13 November 2013
The register records this supersession but attaches no note on what changed.

Is RII40809 on your scope?

This page is the register's record of one product. What it cannot tell you is whether RII40809 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What RII40809 is made of

training.gov.au lists 75 units for RII40809. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 75 listed

Code	Unit	Core or elective	In this product
BSBINM401A	IMPLEMENT WORKPLACE INFORMATION SYSTEM	`N/A`	not current
BSBINN301A	Promote innovation in a team environment	`N/A`	not current
BSBMGT401A	Show leadership in the workplace	`N/A`	not current
BSBMGT403A	Implement continuous improvement	`N/A`	not current
BSBWOR401A	Establish effective workplace relationships	`N/A`	not current
BSBWOR404B	Develop work priorities	`N/A`	not current
CPPSIS3005A	Collect basic spatial data	`N/A`	not current
CPPSIS5002A	Capture new spatial data	`N/A`	not current
CPPSIS5005A	Obtain and validate existing spatial data	`N/A`	not current
CPPSIS5006A	Integrate spatial datasets	`N/A`	not current
MEM09011B	Apply basic engineering design concepts	`N/A`	not current
MEM30001A	Use computer aided drafting systems to produce basic engineering drawings	`N/A`	not current
MEM30002A	Produce basic engineering graphics	`N/A`	not current
MEM30003A	Produce detailed engineering drawings	`N/A`	not current
MEM30004A	Use CAD to create and display 3D models	`N/A`	not current
MSL924001A	Process and interpret data	`N/A`	not current
MSL974003A	Perform chemical tests and procedures	`N/A`	not current
MSL974005A	Perform physical tests	`N/A`	not current
MSL974010A	Perform mechanical tests	`N/A`	not current
MSL975007A	Supervise sampling, inspections and testing at construction sites	`N/A`	not current
MSL975016A	Perform complex tests to measure engineering properties of materials	`N/A`	not current
PMLTEST403B	Assist with geotechnical site investigations	`N/A`	not current
RIICBS401B	Apply the principles of asphalt paving and compaction	`N/A`	not current
RIICBS402B	Apply the principles for the application of bituminous sprayed treatmen	`N/A`	not current
RIICBS403B	Apply the principles for the application of polymer modified binder	`N/A`	not current
RIICBS404B	Apply the principles for the selection and use of bituminous emulsion	`N/A`	not current
RIICBS405A	Apply the principles for the application of slurry surfacing	`N/A`	not current
RIICBS406A	Apply the principles of pavement profiling using a profiler	`N/A`	not current
RIICBS407A	Apply the principles for the manufacture and delivery of hot mix asphalt	`N/A`	not current
RIICBS408A	Apply the principles for the manufacture of cold mix	`N/A`	not current

Show the remaining 45 units

Code	Unit	Core or elective	In this product
RIICBS409A	Apply the principles for the manufacture of polymer modified binder	`N/A`	not current
RIICBS410A	Apply the principles for the manufacture of bituminous emulsion	`N/A`	not current
RIICBS411A	Apply the principles for the manufacture of slurry surfacing	`N/A`	not current
RIICPL401A	Apply the principles for the installation of underground service using open excavation	`N/A`	not current
RIICRC401A	Apply the principles of flexible pavement construction	`N/A`	not current
RIICRC402A	Apply the principles of rigid pavement construction	`N/A`	not current
RIICRC403A	Apply the principles of the stabilisation of materials	`N/A`	not current
RIICRC404A	Inspect and report on pavement condition	`N/A`	not current
RIICRC405A	Carry out pavement condition measurement	`N/A`	not current
RIICRC406B	Apply the principles of pavement maintenance	`N/A`	not current
RIICSG401A	Apply the principles of civil concrete structures construction	`N/A`	not current
RIICSG402A	Apply the principles of civil steel structures construction	`N/A`	not current
RIICSG403A	Apply the principles of civil timber structures construction	`N/A`	not current
RIICSG404A	Apply the principles of civil masonry, crib and gabion structure construction	`N/A`	not current
RIICTC401A	Apply the principles of tunnel construction	`N/A`	not current
RIICTT401A	Apply the principles for the installation of underground services using trenchless technology	`N/A`	not current
RIICTT402A	Apply the principles for the repair and rehabilitation of underground services using trenchless technology	`N/A`	not current
RIICWD501A	Prepare detailed design of foundations	`N/A`	not current
RIICWD502A	Prepare detailed design of lighting	`N/A`	not current
RIICWD504A	Prepare detailed design of environmental controls	`N/A`	not current
RIICWD505A	Prepare detailed design of landscaping	`N/A`	not current
RIICWD506A	Prepare detailed design of canals	`N/A`	not current
RIICWD507A	Prepare detailed geotechnical design	`N/A`	not current
RIICWD508A	Prepare detailed design of rural roads	`N/A`	not current
RIICWD511A	Prepare detailed design of sub-divisions	`N/A`	not current
RIICWD513A	Prepare detailed design of rail civil infrastructure	`N/A`	not current
RIICWD514A	Prepare detailed design of dams	`N/A`	not current
RIICWD515A	Prepare detailed design of airfield civil works	`N/A`	not current
RIICWD516A	Prepare detailed design of bicycle ways	`N/A`	not current
RIICWD517A	Prepare detailed design of industrial hardstands	`N/A`	not current
RIICWD518A	Prepare detailed design of open car parks	`N/A`	not current
RIICWD519A	Prepare detailed design of inter modal facilities civil works	`N/A`	not current
RIICWD521A	Prepare detailed design of flexible pavements	`N/A`	not current
RIICWD522A	Prepare stabilised material mix design	`N/A`	not current
RIICWD523A	Prepare asphalt mix design	`N/A`	not current
RIICWD524B	Prepare design of sprayed seal surfacing	`N/A`	not current
RIICWD525B	Select pavement surfacing	`N/A`	not current
RIICWD527A	Prepare detailed design of traffic signals	`N/A`	not current
RIICWD529A	Prepare detailed design of underground services	`N/A`	not current
RIICWD530A	Prepare detailed design of surface drainage	`N/A`	not current
RIICWD531A	Prepare detailed design of subsurface drainage	`N/A`	not current
RIICWD537A	Prepare detailed design of marine structures civil works	`N/A`	not current
RIIMEX403A	Apply the principles of canal construction	`N/A`	not current
RIIMPO402A	Apply the principles of earthworks construction	`N/A`	not current
RIISTD202A	Collect routine site samples	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every RII training product on the register · Search all training products

Is RII40809 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.