Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is TLI27220 on your scope?
This page is the register's record of one product. What it cannot tell you is whether TLI27220 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What TLI27220 is made of
training.gov.au lists 41 units for TLI27220: 11 core and 30 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 11 listed
| Code | Unit | In this product |
|---|---|---|
| TLIC2075 | Drive and monitor medium or heavy self-propelled on-track equipment | ●current |
| TLIC2076 | Establish and operate braking system on medium/heavy self-propelled on-track equipment | ●current |
| TLIC2078 | Identify and respond to signals and trackside signs | !not current |
| TLIC2080 | Start up, shut down and stable medium/heavy self-propelled on-track equipment | ●current |
| TLIE1003 | Participate in basic workplace communication | ●current |
| TLIF0020 | Safely access the rail corridor | ●current |
| TLIF1001 | Follow work health and safety procedures | !not current |
| TLIF2010 | Apply fatigue management strategies | ●current |
| TLIF2106 | Respond to emergencies and abnormal situations when driving medium/heavy on-track vehicles | ●current |
| TLIU2008 | Apply environmental procedures to rail infrastructure | ●current |
| TLIW0007 | Operate under track protection rules | ●current |
Elective units 30 listed
| Code | Unit | In this product |
|---|---|---|
| TLIB0012 | Maintain and use hand tools | ●current |
| TLIB1093 | Clean equipment and restore worksite | ●current |
| TLIB2001 | Check and assess operational capabilities of equipment | ●current |
| TLIB2085 | Apply track fundamentals | ●current |
| TLIB2091 | Measure and record track geometry | ●current |
| TLIB2130 | Diagnose and rectify minor faults on on-track vehicles | ●current |
| TLIB2133 | Test medium/heavy track vehicle braking system | ●current |
| TLIC0083 | Access rail track to travel track vehicle under a proceed authority | ●current |
| TLIC0084 | Access rail track to travel track vehicles under manual block working conditions | ●current |
| TLIC2054 | Access rail track to run track vehicle within defined worksite | ●current |
| TLIC2074 | Couple and uncouple track maintenance vehicles | ●current |
| TLID1001 | Shift materials safely using manual handling methods | !not current |
| TLIE0002 | Process workplace documentation | ●current |
| TLIE2031 | Use communication systems for on-track vehicle operations | ●current |
| TLIF0008 | Apply safety critical communications in the rail environment | ●current |
| TLIF2006 | Apply accident-emergency procedures | ●current |
| TLIF2018 | Operate firefighting equipment | ●current |
| TLIF3058 | Apply safeworking rules and regulations to rail functions | ●current |
| TLIF3091 | Apply awareness of dangerous goods and hazardous materials requirements | ●current |
| TLII4022 | Identify and meet customer requirements | ●current |
| TLIK2010 | Use infotechnology devices in the workplace | ●current |
| TLIS2030 | Carry out track ballasting | ●current |
| TLIW2028 | Identify the principles of ballast cleaning operations | ●current |
| TLIW2029 | Identify the principles of ballast regulator operations | ●current |
| TLIW2030 | Identify the principles of dynamic track stabaliser operations | ●current |
| TLIW2031 | Identify the principles of self-propelled rail grinder operations | ●current |
| TLIW2032 | Identify the principles of tamping machine operations | ●current |
| TLIW2033 | Identify the principles of mechanised track laying operations | ●current |
| TLIW2037 | Clip and secure points | ●current |
| TLIW3026 | Operate stand alone signalling/point control equipment | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every TLI training product on the register · Search all training products
Is TLI27220 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.