TLI31913 Certificate III in Mechanical Rail Signalling

Supersededtraining.gov.au: supersededEquivalent

The currency period for TLI31913 ended on 17 October 2015 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 19 October 2016 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
TLI10 — TRANSPORT AND LOGISTICS TRAINING PACKAGE
Currency period ends
17 October 2015
Latest release
Release 2 · 24 December 2013 · 2 releases in all
Supersedes
TLI31911
Superseded by
TLI31915 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. TLI31913Superseded — equivalentCertificate III in Mechanical Rail Signalling
  2. equivalent
  3. TLI31915Superseded — equivalentCertificate III in Mechanical Rail Signalling
  4. equivalent
  5. TLI31918Superseded — equivalentCertificate III in Mechanical Rail Signalling
  6. equivalent
  7. TLI30220Superseded — equivalentCertificate III in Mechanical Rail Signalling
  8. equivalent
  9. TLI31920Superseded — equivalentCertificate III in Mechanical Rail Signalling

The chain does not end here: we draw five steps at most, and training.gov.au points on from TLI31920 to TLI31921, which it flags equivalent to TLI31920. Follow it from that page.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • TLI31911TLI31913equivalent20 April 2013

    The register records this supersession but attaches no note on what changed.

  • TLI31913TLI31915equivalent18 October 2015

    Entry requirements changed from eight to seven units by removing TLIW2001 Operate under track protection rules. Updated to align with the Standards for Training Packages.

Is TLI31913 on your scope?

This page is the register's record of one product. What it cannot tell you is whether TLI31913 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What TLI31913 is made of

training.gov.au lists 33 units for TLI31913: 11 core and 22 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 11 listed

CodeUnitIn this product
RIICCM201ACarry out measurements and calculationsnot current
RIICCM203ARead and interpret plans and specificationsnot current
TLIB3046AService and clean mechanical signalling equipment and infrastructurenot current
TLIB3047ARepair and adjust mechanical signalling equipment and infrastructurenot current
TLIB3048ACarry out off-site repair, overhaul and assembly of mechanical signalling equipmentnot current
TLIB3053AMaintain mechanical signalling locking and interlocking devicesnot current
TLIB3120ATest mechanical signalling equipment and isolate faultsnot current
TLIE2008AProcess workplace documentationnot current
TLIF2062AApply awareness of safeworking rules and regulationsnot current
TLIK2010AUse infotechnology devices in the workplacenot current
TLIS3005AInstall mechanical infrastructure for signallingnot current

Elective units 22 listed

CodeUnitIn this product
NWP227BControl vegetation on a sitenot current
RIIHAN301BOperate elevating work platformnot current
RIIOHS202AEnter and work in confined spacesnot current
RIIOHS204AWork safely at heightsnot current
RIIOHS205AControl traffic with stop-slow batnot current
TAEASS401BPlan assessment activities and processesnot current
TAEASS402BAssess competencenot current
TAEDEL301AProvide work skill instructionnot current
TLIA3039AReceive and store stocknot current
TLIB1093AClean equipment and restore worksitenot current
TLIE2007AUse communication systemsnot current
TLIE2029AConduct workplace information briefingsnot current
TLIF2006AApply accident-emergency proceduresnot current
TLIF3013ACoordinate breakdowns and emergenciesnot current
TLIF3058AApply safeworking rules and regulations to rail functionsnot current
TLIG1001AWork effectively with othersnot current
TLIG3002ALead a work team or groupnot current
TLII1002AApply customer service skillsnot current
TLIS2004AInstall and maintain rail bonding systemsnot current
TLIS3023AErect and mount structures and housings for signalling equipmentnot current
TLIW3035AHeat and cut materials using oxy-LPG equipment for the rail industrynot current
UETTDRRF02BPerform pole top rescuenot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every TLI training product on the register · Search all training products

Is TLI31913 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.