TLIPC110 Certificate I in Transport and Logistics (Pathways)

Supersededtraining.gov.au: supersededEquivalent

The currency period for TLIPC110 ended on 17 October 2015 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 19 October 2016 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
TLI10 — TRANSPORT AND LOGISTICS TRAINING PACKAGE
Currency period ends
17 October 2015
Latest release
Release 1 · 7 March 2011
Supersedes
TLIPC107
Superseded by
TLI10115 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. TLIPC110Superseded — equivalentCertificate I in Transport and Logistics (Pathways)
  2. equivalent
  3. TLI10115Superseded — not equivalentCertificate I in Transport and Logistics (Pathways)
  4. not equivalent
  5. TLI11321CurrentCertificate I in Supply Chain Operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • TLIPC107TLIPC110equivalent6 March 2011

    The register records this supersession but attaches no note on what changed.

  • TLIPC110TLI10115equivalent18 October 2015

    Updated to align with the Standards for Training Packages.

Is TLIPC110 on your scope?

This page is the register's record of one product. What it cannot tell you is whether TLIPC110 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What TLIPC110 is made of

training.gov.au lists 16 units for TLIPC110. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 16 listed

CodeUnitCore or electiveIn this product
TLIA2013AReceive goodsN/Anot current
TLIA2020AReplenish stockN/Anot current
TLIA2021ADespatch stockN/Anot current
TLIA2022AParticipate in stocktakesN/Anot current
TLIC1013ARide courier/delivery bicycleN/Anot current
TLIC1051AOperate commercial vehicleN/Anot current
TLIC2012ARide courier/delivery motorcycleN/Anot current
TLID1001AShift materials safely using manual handling methodsN/Anot current
TLID1002AShift a load using manually-operated equipmentN/Anot current
TLIH2001AInterpret road maps and navigate pre-determined routesN/Anot current
TLII1002AApply customer service skillsN/Anot current
TLIPC1001ADemonstrate care and apply safe practices at workN/Anot current
TLIPC1002AAdapt to work requirements in the transport and logistics industryN/Anot current
TLIPC1003AApply effective work practicesN/Anot current
TLIPC1004AComplete courier delivery operationsN/Anot current
TLIPC1005AComplete small store operationsN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every TLI training product on the register · Search all training products

Is TLIPC110 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.