Where the register points next
training.gov.au points at nothing after UEE30820: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEE30820 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEE30820 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEE30820 is made of
training.gov.au lists 101 units for UEE30820: 27 core and 74 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 27 listed
| Code | Unit | In this product |
|---|---|---|
| HLTAID009 | Provide cardiopulmonary resuscitation | ●current |
| UEECD0007 | Apply work health and safety regulations, codes and practices in the workplace | ●current |
| UEECD0016 | Document and apply measures to control WHS risks associated with electrotechnology work | ●current |
| UEECD0019 | Fabricate, assemble and dismantle utilities industry components | ●current |
| UEECD0020 | Fix and secure electrotechnology equipment | ●current |
| UEECD0044 | Solve problems in multiple path circuits | ●current |
| UEECD0046 | Solve problems in single path circuits | ●current |
| UEECD0051 | Use drawings, diagrams, schedules, standards, codes and specifications | ●current |
| UEECO0023 | Participate in electrical work and competency development activities | ●current |
| UEEEL0003 | Arrange circuits, control and protection for electrical installations | ●current |
| UEEEL0005 | Develop and connect electrical control circuits | ●current |
| UEEEL0008 | Evaluate and modify low voltage heating equipment and controls | ●current |
| UEEEL0009 | Evaluate and modify low voltage lighting circuits, equipment and controls | ●current |
| UEEEL0010 | Evaluate and modify low voltage socket outlets circuits | ●current |
| UEEEL0012 | Install low voltage wiring, appliances, switchgear and associated accessories | ●current |
| UEEEL0014 | Isolate, test and troubleshoot low voltage electrical circuits | ●current |
| UEEEL0018 | Select wiring systems and select cables for low voltage electrical installations | ●current |
| UEEEL0019 | Solve problems in direct current (d.c.) machines | ●current |
| UEEEL0020 | Solve problems in low voltage a.c. circuits | ●current |
| UEEEL0021 | Solve problems in magnetic and electromagnetic devices | ●current |
| UEEEL0023 | Terminate cables, cords and accessories for low voltage circuits | ●current |
| UEEEL0024 | Test and connect alternating current (a.c.) rotating machines | ●current |
| UEEEL0025 | Test and connect transformers | ●current |
| UEEEL0039 | Design, install and verify compliance and functionality of general electrical installations | ●current |
| UEEEL0047 | Identify, shut down and restart systems with alternate supplies | ●current |
| UEERE0001 | Apply environmentally and sustainable procedures in the energy sector | ●current |
| UETDRRF004 | Perform rescue from a live LV panel | !not current |
Elective units 74 listed
| Code | Unit | In this product |
|---|---|---|
| UEEAS0007 | Assemble, mount and connect control gear and switchgear | ●current |
| UEEAS0008 | Fabricate and assemble bus bars | ●current |
| UEEAS0009 | Mount and wire control panel equipment | ●current |
| UEECD0028 | Plan an integrated cabling installation system | ●current |
| UEECD0050 | Use and maintain the integrity of a portable gas detection device | ●current |
| UEECS0033 | Use engineering applications software on personal computers | ●current |
| UEEDV0005 | Install and maintain cabling for multiple access to telecommunication services | ●current |
| UEEDV0008 | Install, modify and verify coaxial and structured communication copper cabling | ●current |
| UEEEC0003 | Assemble and set up basic security systems | ●current |
| UEEEC0060 | Repairs basic electronic apparatus faults by replacement of components | ●current |
| UEEEC0075 | Troubleshoot single phase input d.c power supplies | ●current |
| UEEEL0004 | Carry out basic repairs to electrical components and equipment | ●current |
| UEEEL0016 | Provide advice on effective and energy efficient lighting products | ●current |
| UEEEL0017 | Repair and maintain mechanical components of electrical machines | ●current |
| UEEEL0022 | Supply effective and efficient lighting products for domestic and small commercial applications | ●current |
| UEEEL0026 | Align and install traction lift equipment | ●current |
| UEEEL0033 | Conduct electrical tests on LV electrical machines | ●current |
| UEEEL0034 | Conduct mechanical tests on electrical machines and components | ●current |
| UEEEL0045 | Diagnose and rectify faults in traction lift systems | ●current |
| UEEEL0046 | Find and repair faults in LV d.c. electrical apparatus and circuits | ●current |
| UEEEL0049 | Install and maintain emergency safety systems | ●current |
| UEEEL0052 | Maintain and service traction lift systems and equipment | ●current |
| UEEEL0053 | Maintain operation of electrical marine equipment and systems | ●current |
| UEEEL0054 | Maintain operation of electrical mining equipment and systems | ●current |
| UEEEL0055 | Overhaul and repair major switchgear and control gear | ●current |
| UEEEL0056 | Place and connect electrical coils | ●current |
| UEEEL0061 | Provide advice on the application of energy efficient lighting for ambient and aesthetic effect | ●current |
| UEEEL0066 | Rewind LV direct current machines | ●current |
| UEEEL0067 | Rewind single phase machines | ●current |
| UEEEL0068 | Rewind three phase low voltage induction machines | ●current |
Show the remaining 44 elective units
| Code | Unit | In this product |
|---|---|---|
| UEEEL0069 | Select and arrange equipment for special LV electrical installations | ●current |
| UEEEL0074 | Wind electrical coils | ●current |
| UEEEL0075 | Inspect, test and maintain emergency alarm systems and equipment | ●current |
| UEEEL0076 | Inspect, test and maintain emergency lighting systems | ●current |
| UEEEL0078 | Install and commission whole current electricity meters | ●current |
| UEEHA0004 | Enter a classified hazardous area to undertake work related to electrical equipment | ●current |
| UEEHA0020 | Conduct detailed inspection of electrical installations for hazardous areas | ●current |
| UEEHA0022 | Determine the explosion-protection requirements to meet a specified classified hazardous area | ●current |
| UEEHA0025 | Install explosion-protected equipment and associated apparatus and wiring systems | ●current |
| UEEHA0026 | Maintain equipment associated with hazardous areas | ●current |
| UEEHA0038 | Conduct visual and close inspection of electrical installations for hazardous areas | ●current |
| UEEIC0002 | Assemble, enter and verify operating instructions in microprocessor equipped devices | ●current |
| UEEIC0011 | Develop electrical integrated systems | ●current |
| UEEIC0013 | Develop, enter and verify discrete control programs for programmable controllers | ●current |
| UEEIC0015 | Develop, enter and verify word and analogue control programs for programmable logic controllers | ●current |
| UEEIC0024 | Plan the electrical installation of integrated systems | ●current |
| UEEIC0038 | Solve problems in density/level measurement components and systems | ●current |
| UEEIC0039 | Solve problems in flow measurement components and systems | ●current |
| UEEIC0041 | Solve problems in pressure measurement components and systems | ●current |
| UEEIC0043 | Solve problems in temperature measurement components and systems | ●current |
| UEEIC0047 | Use instrumentation drawings, specifications, standards and equipment manuals | ●current |
| UEERA0035 | Establish the basic operating conditions of air conditioning systems | ●current |
| UEERA0036 | Establish the basic operating conditions of vapour compression systems | ●current |
| UEERA0049 | Install and start up single head split air conditioning and water heating heat pump systems | ●current |
| UEERA0059 | Prepare and connect refrigerant tubing and fittings | ●current |
| UEERA0064 | Recover, pressure test, evacuate, charge and leak test refrigerants - split systems | ●current |
| UEERE0049 | Apply safe work practices in the rooftop solar industry | ●current |
| UEERE0054 | Conduct site survey for grid-connected photovoltaic and battery storage systems | ●current |
| UEERE0077 | Install battery storage equipment power conversion equipment to grid | ●current |
| UEERE0078 | Install battery storage to power conversion equipment | ●current |
| UEERE0080 | Install photovoltaic power conversion equipment to grid | ●current |
| UEERE0081 | Install photovoltaic systems to power conversion equipment | ●current |
| UEERS0021 | Assemble and wire electrical rail signalling equipment | ●current |
| UEERS0024 | Install and maintain rail track circuit leads and bonds | ●current |
| UEERS0036 | Repair rail signalling power and control cables | ●current |
| UEERS0037 | Test copper rail signalling cables | ●current |
| UETDRIS017 | Perform high voltage field switching operation to a given schedule | ●current |
| UETDRIS018 | Perform low voltage field switching operation to a given schedule | ●current |
| UETDRIS031 | Maintain insulating oil | ●current |
| UETDRIS032 | Solve problems in network equipment | ●current |
| UETDRIS033 | Solve problems in network protection | ●current |
| UETDRSB001 | Perform substation switching operations to a given schedule | ●current |
| UETDRSB007 | Install and maintain substation direct current systems | ●current |
| UETDRSB010 | Maintain capacitor bank equipment | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEE training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day UEE30820 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.