Where the register points next
training.gov.au points at nothing after UEE33020: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEE33020 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEE33020 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEE33020 is made of
training.gov.au lists 103 units for UEE33020: 21 core and 82 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 21 listed
| Code | Unit | In this product |
|---|---|---|
| HLTAID009 | Provide cardiopulmonary resuscitation | ●current |
| UEECD0007 | Apply work health and safety regulations, codes and practices in the workplace | ●current |
| UEECD0016 | Document and apply measures to control WHS risks associated with electrotechnology work | ●current |
| UEECD0019 | Fabricate, assemble and dismantle utilities industry components | ●current |
| UEECD0020 | Fix and secure electrotechnology equipment | ●current |
| UEECD0044 | Solve problems in multiple path circuits | ●current |
| UEECD0046 | Solve problems in single path circuits | ●current |
| UEECD0051 | Use drawings, diagrams, schedules, standards, codes and specifications | ●current |
| UEECO0023 | Participate in electrical work and competency development activities | ●current |
| UEEEL0003 | Arrange circuits, control and protection for electrical installations | ●current |
| UEEEL0005 | Develop and connect electrical control circuits | ●current |
| UEEEL0014 | Isolate, test and troubleshoot low voltage electrical circuits | ●current |
| UEEEL0019 | Solve problems in direct current (d.c.) machines | ●current |
| UEEEL0020 | Solve problems in low voltage a.c. circuits | ●current |
| UEEEL0021 | Solve problems in magnetic and electromagnetic devices | ●current |
| UEEEL0023 | Terminate cables, cords and accessories for low voltage circuits | ●current |
| UEEEL0024 | Test and connect alternating current (a.c.) rotating machines | ●current |
| UEEEL0025 | Test and connect transformers | ●current |
| UEEEL0028 | Conduct compliance and functional verification of electrical apparatus and existing circuits | ●current |
| UEEEL0047 | Identify, shut down and restart systems with alternate supplies | ●current |
| UEERE0001 | Apply environmentally and sustainable procedures in the energy sector | ●current |
Elective units 82 listed
| Code | Unit | In this product |
|---|---|---|
| UEEAS0007 | Assemble, mount and connect control gear and switchgear | ●current |
| UEEAS0008 | Fabricate and assemble bus bars | ●current |
| UEEAS0009 | Mount and wire control panel equipment | ●current |
| UEECD0050 | Use and maintain the integrity of a portable gas detection device | ●current |
| UEECS0033 | Use engineering applications software on personal computers | ●current |
| UEEDV0001 | Assemble and connect telecommunication frames and cabinets | ●current |
| UEEDV0005 | Install and maintain cabling for multiple access to telecommunication services | ●current |
| UEEDV0008 | Install, modify and verify coaxial and structured communication copper cabling | ●current |
| UEEEC0060 | Repairs basic electronic apparatus faults by replacement of components | ●current |
| UEEEC0075 | Troubleshoot single phase input d.c power supplies | ●current |
| UEEEL0004 | Carry out basic repairs to electrical components and equipment | ●current |
| UEEEL0008 | Evaluate and modify low voltage heating equipment and controls | ●current |
| UEEEL0009 | Evaluate and modify low voltage lighting circuits, equipment and controls | ●current |
| UEEEL0010 | Evaluate and modify low voltage socket outlets circuits | ●current |
| UEEEL0016 | Provide advice on effective and energy efficient lighting products | ●current |
| UEEEL0017 | Repair and maintain mechanical components of electrical machines | ●current |
| UEEEL0022 | Supply effective and efficient lighting products for domestic and small commercial applications | ●current |
| UEEEL0026 | Align and install traction lift equipment | ●current |
| UEEEL0033 | Conduct electrical tests on LV electrical machines | ●current |
| UEEEL0034 | Conduct mechanical tests on electrical machines and components | ●current |
| UEEEL0045 | Diagnose and rectify faults in traction lift systems | ●current |
| UEEEL0046 | Find and repair faults in LV d.c. electrical apparatus and circuits | ●current |
| UEEEL0052 | Maintain and service traction lift systems and equipment | ●current |
| UEEEL0053 | Maintain operation of electrical marine equipment and systems | ●current |
| UEEEL0054 | Maintain operation of electrical mining equipment and systems | ●current |
| UEEEL0055 | Overhaul and repair major switchgear and control gear | ●current |
| UEEEL0056 | Place and connect electrical coils | ●current |
| UEEEL0061 | Provide advice on the application of energy efficient lighting for ambient and aesthetic effect | ●current |
| UEEEL0066 | Rewind LV direct current machines | ●current |
| UEEEL0067 | Rewind single phase machines | ●current |
Show the remaining 52 elective units
| Code | Unit | In this product |
|---|---|---|
| UEEEL0068 | Rewind three phase low voltage induction machines | ●current |
| UEEEL0074 | Wind electrical coils | ●current |
| UEEHA0004 | Enter a classified hazardous area to undertake work related to electrical equipment | ●current |
| UEEHA0022 | Determine the explosion-protection requirements to meet a specified classified hazardous area | ●current |
| UEEHA0025 | Install explosion-protected equipment and associated apparatus and wiring systems | ●current |
| UEEHA0026 | Maintain equipment associated with hazardous areas | ●current |
| UEEHA0031 | Supervise repair and overhaul of explosion-protected equipment type flameproof (Ex d) | ●current |
| UEEHA0032 | Supervise repair and overhaul of explosion-protected equipment type increased safety (Ex e) | ●current |
| UEEHA0033 | Supervise repair and overhaul of explosion-protected equipment type intrinsically safe (Ex i) | ●current |
| UEEHA0034 | Supervise repair and overhaul of explosion-protected equipment type pressurised (Ex p) | ●current |
| UEEHA0035 | Supervise repair and overhaul of explosion-protected rotating machines | ●current |
| UEEHA0039 | Supervise repair and overhaul of explosion-protected equipment type Group III ('t') | ●current |
| UEEIC0002 | Assemble, enter and verify operating instructions in microprocessor equipped devices | ●current |
| UEEIC0013 | Develop, enter and verify discrete control programs for programmable controllers | ●current |
| UEEIC0015 | Develop, enter and verify word and analogue control programs for programmable logic controllers | ●current |
| UEEIC0022 | Install instrumentation and control apparatus and associated equipment | ●current |
| UEEIC0023 | Install instrumentation and control cabling and tubing | ●current |
| UEEIC0038 | Solve problems in density/level measurement components and systems | ●current |
| UEEIC0039 | Solve problems in flow measurement components and systems | ●current |
| UEEIC0041 | Solve problems in pressure measurement components and systems | ●current |
| UEEIC0043 | Solve problems in temperature measurement components and systems | ●current |
| UEEIC0047 | Use instrumentation drawings, specifications, standards and equipment manuals | ●current |
| UEERA0035 | Establish the basic operating conditions of air conditioning systems | ●current |
| UEERA0036 | Establish the basic operating conditions of vapour compression systems | ●current |
| UEERA0043 | Find and rectify faults in appliance control systems and devices | ●current |
| UEERA0044 | Find and rectify faults in single phase motors and associated controls | ●current |
| UEERA0045 | Find and rectify faults in three phase motors and associated controls | ●current |
| UEERA0049 | Install and start up single head split air conditioning and water heating heat pump systems | ●current |
| UEERA0050 | Install refrigerant pipe work, flow controls and accessories | ●current |
| UEERA0059 | Prepare and connect refrigerant tubing and fittings | ●current |
| UEERA0062 | Recover and charge refrigerants | ●current |
| UEERA0079 | Safely handle refrigerants and lubricants | ●current |
| UEERA0085 | Service clothes washing machines and dryers | ●current |
| UEERA0087 | Service electrical heating appliances | ●current |
| UEERA0089 | Service refrigeration appliances | ●current |
| UEERA0091 | Service small electrical appliances and power tools | ●current |
| UEERL0004 | Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring | ●current |
| UEERL0005 | Locate and rectify faults in low voltage (LV) electrical equipment using set procedures | ●current |
| UEERL0006 | Attach HV flexible cables and plugs | ●current |
| UEERL0007 | Disconnect-reconnect 3.3 kV electric propulsion components of self-propelled earth moving vehicles | ●current |
| UEERL0008 | Disconnect-reconnect explosion-protected appliances and control devices connected to LV installation | ●current |
| UEERS0021 | Assemble and wire electrical rail signalling equipment | ●current |
| UEERS0036 | Repair rail signalling power and control cables | ●current |
| UEERS0037 | Test copper rail signalling cables | ●current |
| UETDRIS017 | Perform high voltage field switching operation to a given schedule | ●current |
| UETDRIS018 | Perform low voltage field switching operation to a given schedule | ●current |
| UETDRIS031 | Maintain insulating oil | ●current |
| UETDRIS032 | Solve problems in network equipment | ●current |
| UETDRIS033 | Solve problems in network protection | ●current |
| UETDRMP007 | Perform rescue from a live low voltage panel | !not current |
| UETDRSB001 | Perform substation switching operations to a given schedule | ●current |
| UETDRSB010 | Maintain capacitor bank equipment | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEE training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day UEE33020 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.