UEE41611 Certificate IV in Renewable Energy

Supersededtraining.gov.au: supersededEquivalent

The currency period for UEE41611 ended on 3 October 2020 — 6 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 5 October 2021. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UEE11 — Electrotechnology Training Package
Currency period ends
3 October 2020
Latest release
Release 4 · 17 April 2014 · 4 releases in all
Supersedes
UEE41610
Superseded by
UEE41620 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEE41611Superseded — equivalentCertificate IV in Renewable Energy
  2. equivalent
  3. UEE41620Deleted from the registerCertificate IV in Renewable Energy

The register does not list a current endpoint for this chain: UEE41620 is the last product it points at, and UEE41620 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEE41610UEE41611equivalent15 March 2012

    The register records this supersession but attaches no note on what changed.

  • UEE41611UEE41620equivalent4 October 2020

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for UEE41611 and for its training package UEE11 (release 1.5), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • UEE41611_R4.pdfUEE41611 release 4 · product document · published 22 December 2022
  • UEE41611_R4.docxUEE41611 release 4 · product document · published 26 November 2024

Is UEE41611 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEE41611 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEE41611 is made of

training.gov.au lists 52 units for UEE41611: 18 core and 34 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 18 listed

CodeUnitIn this product
UEENEEE038BParticipate in development and follow a personal competency development plannot current
UEENEEE101AApply Occupational Health and Safety regulations, codes and practices in the workplacenot current
UEENEEE102AFabricate, assemble and dismantle utilities industry componentsnot current
UEENEEE104ASolve problems in d.c. circuitsnot current
UEENEEE105AFix and secure electrotechnology equipmentnot current
UEENEEE107AUse drawings, diagrams, schedules, standards, codes and specificationsnot current
UEENEEE108ALay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuitsnot current
UEENEEE117AImplement and monitor energy sector OHS policies and proceduresnot current
UEENEEE119ASolve problems in multiple path extra low voltage (ELV) a.c. circuitsnot current
UEENEEE124ACompile and produce an energy sector detailed reportnot current
UEENEEE137ADocument and apply measures to control OHS risks associated with electrotechnology worknot current
UEENEEG101ASolve problems in electromagnetic devices and related circuitsnot current
UEENEEK123ACarry out basic repairs to renewable energy apparatusnot current
UEENEEK125ASolve basic problems in photovoltaic energy apparatus and systemsnot current
UEENEEK127ADiagnose and rectify faults in renewable energy control systemsnot current
UEENEEK128ASolve problems in stand-alone renewable energy systemsnot current
UEENEEK145AImplement and monitor energy sector environmental and sustainable policies and proceduresnot current
UEENEEK149AVerify compliance and functionality of a extra low voltage renewable energy installationnot current

Elective units 34 listed

CodeUnitIn this product
CPCCOHS1001AWork safely in the construction industrynot current
HLTAID001Provide cardiopulmonary resuscitationnot current
HLTAID009Provide cardiopulmonary resuscitationcurrent
UEENEEC001BMaintain documentationnot current
UEENEEC002BSource and purchase material/parts for installation or service jobsnot current
UEENEEC003BProvide quotations for installation or service jobsnot current
UEENEEC004BPrepare specifications for the supply of materials and equipment for electrotechnology projectsnot current
UEENEEC005BEstimate electrotechnology projectsnot current
UEENEEC010BDeliver a service to customersnot current
UEENEED101AUse computer applications relevant to a workplacenot current
UEENEEE009BComply with scheduled and preventative maintenance program processesnot current
UEENEEE020BProvide basic instruction in the use of electrotechnology apparatusnot current
UEENEEE114ASupervise and coordinate energy sector work activitiesnot current
UEENEEE190APrepare engineering drawings using manual drafting and CAD for electrotechnology/utilities applicationsnot current
UEENEEE191APrepare electrotechnology/utilities drawings using manual drafting and CAD equipment and softwarenot current
UEENEEE192AProduce detailed electrotechnology /utilities drawings using computer aided design equipment and softwarenot current
UEENEEI150ADevelop, enter and verify discrete control programs for programmable controllersnot current
UEENEEI151ADevelop, enter and verify word and analogue control programs for programmable logic controllersnot current
UEENEEI152ADevelop, enter and verify programs in Supervisory Control and Data Acquisition systemsnot current
UEENEEK107AConduct checks in the demand side use of remote area power supplies (RAPS)not current
UEENEEK108APlan periodic maintenance schedules of remote area power supplies (RAPS)not current
UEENEEK109AAttend to breakdowns in remote area power supplies (RAPS)not current
UEENEEK110ACo-ordinate maintenance of renewable energy (RE) apparatus and systemsnot current
UEENEEK117AMaintain and repair facilities associated with remote area essential service operationsnot current
UEENEEK120AMaintain operation of remote area power generation plantnot current
UEENEEK124ASolve basic problems in micro hydro systemsnot current
UEENEEK130ASolve problems in wind energy conversion systems rated up to 10 kWnot current
UEENEEK134AInstall ELV stand-alone photovoltaic power systemsnot current
UEENEEK135ADesign grid connected photovoltaic power supply systemsnot current
UEENEEK137AInstall, set up and maintain ELV micro-hydro systems rated up to 6.4 kWnot current
Show the remaining 4 elective units
CodeUnitIn this product
UEENEEK143AInstall small wind energy conversion systems rated up to 10 kW for ELV stand-alone applicationsnot current
UEENEEP024AAttach cords and plugs to electrical equipment for connection to a single phase 230 Volt supplynot current
UEENEEP025AAttach cords, cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supplynot current
UEENEEP026AConduct in-service safety testing of electrical cord connected equipment and cord assembliesnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is UEE41611 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.