When must new enrolments into UEE50110 stop?

New enrolments are not permitted from 16 March 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in UEE50110?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

UEE50110 Diploma of Computer Systems Engineering

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

UEE50110Superseded — equivalentDiploma of Computer Systems Engineering
equivalent
UEE50111Superseded — equivalentDiploma of Computer Systems Engineering
equivalent
UEE50120Superseded — not equivalentDiploma of Computer Systems Engineering
not equivalent
UEE50122CurrentDiploma of Computer Systems Engineering

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

UEE50107UEE50110equivalent28 July 2011
The register records this supersession but attaches no note on what changed.
UEE50110UEE50111equivalent15 March 2012
The register records this supersession but attaches no note on what changed.

Is UEE50110 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEE50110 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEE50110 is made of

training.gov.au lists 99 units for UEE50110. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 99 listed

Code	Unit	Core or elective	In this product
BSBINM501A	Manage an information or knowledge management system	`N/A`	not current
BSBINN502A	Build and sustain an innovative work environment	`N/A`	not current
BSBMGT502B	Manage people performance	`N/A`	not current
BSBMGT516C	Facilitate continuous improvement	`N/A`	not current
BSBWOR502B	Ensure team effectiveness	`N/A`	not current
UEENEEA001B	Assemble electronic apparatus	`N/A`	not current
UEENEEA002B	Select electronic components	`N/A`	not current
UEENEEA004B	Rework electronic sub assemblies	`N/A`	not current
UEENEEA006B	Apply lead-free soldering techniques	`N/A`	not current
UEENEEC001B	Maintain documentation	`N/A`	not current
UEENEEC002B	Source and purchase material/parts for installation or service jobs	`N/A`	not current
UEENEEC003B	Provide quotations for installation or service jobs	`N/A`	not current
UEENEEC004B	Prepare specifications for the supply of materials and equipment for electrotechnology projects	`N/A`	not current
UEENEEC005B	Estimate electrotechnology projects	`N/A`	not current
UEENEEC006B	Prepare tender submissions for electrotechnology projects	`N/A`	not current
UEENEEC010B	Deliver a service to customers	`N/A`	not current
UEENEED001B	Use basic computer applications relevant to a workplace	`N/A`	not current
UEENEED002B	Assemble, set up and test personal computers	`N/A`	not current
UEENEED003B	Evaluate and modify programs written in object oriented code	`N/A`	not current
UEENEED004B	Use engineering applications software	`N/A`	not current
UEENEED005B	Enter and verify operating instructions in microprocessor equipped devices	`N/A`	not current
UEENEED010B	Set up and create content for a web server	`N/A`	not current
UEENEED011B	Develop object oriented code	`N/A`	not current
UEENEED012B	Support computer hardware and software	`N/A`	not current
UEENEED013B	Install and administer Unix based computers	`N/A`	not current
UEENEED015B	Administer user networks	`N/A`	not current
UEENEED017B	Install and configure Internetworking systems	`N/A`	not current
UEENEED018B	Design and implement Internetworking systems	`N/A`	not current
UEENEED024B	Integrate multiple computer operating systems on a client server network	`N/A`	not current
UEENEED025B	Design and configure Human-Machine Interface networks	`N/A`	not current

Show the remaining 69 units

Code	Unit	Core or elective	In this product
UEENEED027B	Develop structured programs to control external devices	`N/A`	not current
UEENEED028B	Develop and test code for microcontroller devices	`N/A`	not current
UEENEED029B	Develop basic web pages for engineering applications	`N/A`	not current
UEENEED030B	Select, install, configure and test multimedia devices	`N/A`	not current
UEENEED031B	Develop and validate basic integrated systems	`N/A`	not current
UEENEED032B	Design integrated systems	`N/A`	not current
UEENEED033B	Design complex integrated systems	`N/A`	not current
UEENEED034B	Configure and maintain industrial control system networks	`N/A`	not current
UEENEED043B	Install and configure a computer operating system and software	`N/A`	not current
UEENEED044B	Commission computer systems	`N/A`	not current
UEENEED045B	Modify-redesign of computer system	`N/A`	not current
UEENEED046B	Set up and configure basic local area network	`N/A`	not current
UEENEED050B	Develop control programs for microcomputer equipped devices	`N/A`	not current
UEENEED051B	Provide programming solution for engineering problems	`N/A`	not current
UEENEED053B	Set up and test biometric devices	`N/A`	not current
UEENEED054B	Analyse and implement biometric techniques and applications	`N/A`	not current
UEENEEE001B	Apply OHS practices in the workplace	`N/A`	not current
UEENEEE002B	Dismantle, assemble and fabricate electrotechnology components	`N/A`	not current
UEENEEE003B	Solve problems in extra-low voltage single path circuits	`N/A`	not current
UEENEEE004B	Solve problems in multiple path d.c. circuits	`N/A`	not current
UEENEEE005B	Fix and secure equipment	`N/A`	not current
UEENEEE007B	Use drawings, diagrams, schedules and manuals	`N/A`	not current
UEENEEE008B	Lay wiring/cabling and terminate accessories for extra-low voltage circuits	`N/A`	not current
UEENEEE009B	Comply with scheduled and preventative maintenance program processes	`N/A`	not current
UEENEEE010B	Develop and implement maintenance programs	`N/A`	not current
UEENEEE014B	Supervise and coordinate work activities	`N/A`	not current
UEENEEE015B	Develop design briefs for electrotechnology projects	`N/A`	not current
UEENEEE017B	Implement and monitor OHS policies and procedures	`N/A`	not current
UEENEEE019C	Solve problems in multiple path a.c. circuits	`N/A`	not current
UEENEEE020B	Provide basic instruction in the use of electrotechnology apparatus	`N/A`	not current
UEENEEE023B	Solve basic problems in electronic and digital equipment	`N/A`	not current
UEENEEE024C	Compile and produce an electrotechnology report	`N/A`	not current
UEENEEE025B	Solve problems in complex multiple path circuits	`N/A`	not current
UEENEEE026B	Provide computational solutions to basic engineering problems	`N/A`	not current
UEENEEE032B	Document occupational hazards and risks in computer systems	`N/A`	not current
UEENEEE038B	Participate in development and follow a personal competency development plan	`N/A`	not current
UEENEEE046B	Identify affects of energy on machinery and materials in an electrotechnology environment	`N/A`	not current
UEENEEE048C	Carry out routine work activities in an electrotechnology environment	`N/A`	not current
UEENEEE050B	Undertake computations in an electrotechnology environment	`N/A`	not current
UEENEEE070B	Write specifications for computer systems engineering projects	`N/A`	not current
UEENEEF002B	Lay and connect cables for multiple access to telecommunication services	`N/A`	not current
UEENEEF004B	Install and modify performance data communication structured cabling	`N/A`	not current
UEENEEF005B	Install and modify performance data communication optical fibre cabling	`N/A`	not current
UEENEEF007B	Set up the wireless capabilities of communications and data storage devices	`N/A`	not current
UEENEEF008B	Select and arrange equipment for wireless networks	`N/A`	not current
UEENEEF009B	Install and connect voice and data communications equipment	`N/A`	not current
UEENEEF010B	Select and arrange equipment for local area networks	`N/A`	not current
UEENEEH001B	Carry out basic repairs to computer equipment by replacement of modules/sub-assemblies	`N/A`	not current
UEENEEH002B	Carry out basic repairs to electronic apparatus by replacement of components	`N/A`	not current
UEENEEH003B	Carry out routine repairs to business equipment	`N/A`	not current
UEENEEH011B	Troubleshoot d.c. power supplies with single phase input	`N/A`	not current
UEENEEH012B	Troubleshoot digital subsystems	`N/A`	not current
UEENEEH013B	Troubleshoot amplifiers	`N/A`	not current
UEENEEH014B	Troubleshoot frequency dependent circuits	`N/A`	not current
UEENEEH015B	Develop software solutions in microcontroller based systems	`N/A`	not current
UEENEEH039B	Troubleshoot basic amplifiers	`N/A`	not current
UEENEEH044B	Diagnose and rectify faults in analogue circuits and components in electronic control systems	`N/A`	not current
UEENEEH045B	Develop solutions to analogue electronic problems	`N/A`	not current
UEENEEH048B	Design and develop advanced digital systems	`N/A`	not current
UEENEEH050B	Assemble and set up basic wired and wireless security systems	`N/A`	not current
UEENEEH051B	Install large wired and wireless security systems	`N/A`	not current
UEENEEH052B	Enter instructions and test basic wired and wireless security systems	`N/A`	not current
UEENEEH057B	Develop basic integrated security systems plan	`N/A`	not current
UEENEEH066B	Fault find Microcontroller based hardware	`N/A`	not current
UEENEEH069B	Solve problems in electronic circuits	`N/A`	not current
UEENEEH081B	Design printed circuit boards	`N/A`	not current
UEENEEH083B	Analyse the performance of wireless-based electronic systems	`N/A`	not current
UEENEEI001B	Install and set up transducers and sensing devices	`N/A`	not current
UEENEEK045A	Implement and monitor, policies procedures for environmentally sustainable electrotech work practice	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Is UEE50110 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.