Where the register points next
training.gov.au points at nothing after UEE50420: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEE50420 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEE50420 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEE50420 is made of
training.gov.au lists 134 units for UEE50420: 5 core and 129 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 5 listed
| Code | Unit | In this product |
|---|---|---|
| UEECD0010 | Compile and produce an energy sector detailed report | ●current |
| UEECD0024 | Implement and monitor energy sector WHS policies and procedures | ●current |
| UEECD0027 | Participate in development and follow a personal competency development plan | ●current |
| UEECD0060 | Write specifications for electrotechnology engineering projects | ●current |
| UEERE0013 | Develop strategies to address environmental and sustainability issues in the energy sector | ●current |
Elective units 129 listed
| Code | Unit | In this product |
|---|---|---|
| BSBINS501 | Implement information and knowledge management systems | ●current |
| BSBLDR522 | Manage people performance | ●current |
| BSBOPS203 | Deliver a service to customers | ●current |
| BSBSTR501 | Establish innovative work environments | ●current |
| BSBSTR502 | Facilitate continuous improvement | ●current |
| BSBTWK502 | Manage team effectiveness | ●current |
| CPPHES4005 | Assess household energy use and efficiency improvements | ●current |
| ICTICT214 | Operate application software packages | ●current |
| UEEAS0007 | Assemble, mount and connect control gear and switchgear | ●current |
| UEEAS0008 | Fabricate and assemble bus bars | ●current |
| UEEAS0009 | Mount and wire control panel equipment | ●current |
| UEECD0011 | Comply with scheduled and preventative maintenance program processes | ●current |
| UEECD0013 | Develop and implement energy sector maintenance programs | ●current |
| UEECD0028 | Plan an integrated cabling installation system | ●current |
| UEECD0035 | Provide basic instruction in the use of electrotechnology apparatus | ●current |
| UEECD0036 | Provide engineering solutions for problems in complex multiple path circuits | ●current |
| UEECD0039 | Provide solutions to basic engineering computational problems | ●current |
| UEECO0001 | Estimate electrotechnology projects | ●current |
| UEECO0002 | Maintain documentation | ●current |
| UEECO0014 | Prepare tender submissions for electrotechnology projects | ●current |
| UEECO0015 | Provide quotations for installation or service jobs | ●current |
| UEECO0017 | Source and purchase material/parts for installation or service jobs | ●current |
| UEECS0033 | Use engineering applications software on personal computers | ●current |
| UEEDV0005 | Install and maintain cabling for multiple access to telecommunication services | ●current |
| UEEDV0008 | Install, modify and verify coaxial and structured communication copper cabling | ●current |
| UEEEC0003 | Assemble and set up basic security systems | ●current |
| UEEEC0060 | Repairs basic electronic apparatus faults by replacement of components | ●current |
| UEEEC0075 | Troubleshoot single phase input d.c power supplies | ●current |
| UEEEL0004 | Carry out basic repairs to electrical components and equipment | ●current |
| UEEEL0006 | Develop detailed and complex drawings for electrical systems using CAD systems | ●current |
Show the remaining 99 elective units
| Code | Unit | In this product |
|---|---|---|
| UEEEL0007 | Develop detailed electrical drawings | ●current |
| UEEEL0011 | Evaluate performance of low voltage electrical apparatus | ●current |
| UEEEL0016 | Provide advice on effective and energy efficient lighting products | ●current |
| UEEEL0017 | Repair and maintain mechanical components of electrical machines | ●current |
| UEEEL0022 | Supply effective and efficient lighting products for domestic and small commercial applications | ●current |
| UEEEL0026 | Align and install traction lift equipment | ●current |
| UEEEL0027 | Carry out low voltage electrical field testing and report findings | ●current |
| UEEEL0029 | Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase | ●current |
| UEEEL0030 | Conduct compliance inspection of single phase LV electrical installations | ●current |
| UEEEL0031 | Conduct compliance inspection of special LV electrical installations | ●current |
| UEEEL0032 | Conduct electrical tests on HV electrical machines | ●current |
| UEEEL0033 | Conduct electrical tests on LV electrical machines | ●current |
| UEEEL0034 | Conduct mechanical tests on electrical machines and components | ●current |
| UEEEL0035 | Design effective and efficient lighting for public, open and sports areas | ●current |
| UEEEL0036 | Design effective and efficient lighting for residential and commercial buildings | ●current |
| UEEEL0037 | Design electrical installations with a low voltage demand greater than 400 A per phase | ●current |
| UEEEL0040 | Develop compliance policies and plans to conduct an electrical contracting business | ●current |
| UEEEL0044 | Diagnose and rectify faults in complex lift systems | ●current |
| UEEEL0045 | Diagnose and rectify faults in traction lift systems | ●current |
| UEEEL0046 | Find and repair faults in LV d.c. electrical apparatus and circuits | ●current |
| UEEEL0049 | Install and maintain emergency safety systems | ●current |
| UEEEL0050 | Install and replace low voltage current transformer metering | ●current |
| UEEEL0051 | Investigate and report on electrical incidents and causes | ●current |
| UEEEL0052 | Maintain and service traction lift systems and equipment | ●current |
| UEEEL0053 | Maintain operation of electrical marine equipment and systems | ●current |
| UEEEL0054 | Maintain operation of electrical mining equipment and systems | ●current |
| UEEEL0055 | Overhaul and repair major switchgear and control gear | ●current |
| UEEEL0056 | Place and connect electrical coils | ●current |
| UEEEL0057 | Plan electrical installations with a low voltage demand up to 400 A per phase | ●current |
| UEEEL0059 | Plan low voltage switchboard and control panel layouts | ●current |
| UEEEL0060 | Prepare quotations for the supply of effective and efficient lighting products for lighting projects | ●current |
| UEEEL0061 | Provide advice on the application of energy efficient lighting for ambient and aesthetic effect | ●current |
| UEEEL0062 | Provide engineering solutions to problems in complex polyphase power circuits | ●current |
| UEEEL0063 | Provide photometric data for illumination system design | ●current |
| UEEEL0064 | Rewind HV three phase induction machines rated for voltages above 3.3 kV | ●current |
| UEEEL0065 | Rewind HV three phase induction machines rated for voltages to 3.3 kV | ●current |
| UEEEL0066 | Rewind LV direct current machines | ●current |
| UEEEL0067 | Rewind single phase machines | ●current |
| UEEEL0068 | Rewind three phase low voltage induction machines | ●current |
| UEEEL0069 | Select and arrange equipment for special LV electrical installations | ●current |
| UEEEL0070 | Select effective and efficient light sources and luminaries for given locations and designs | ●current |
| UEEEL0071 | Select low voltage power factor correction equipment | ●current |
| UEEEL0072 | Set up and place LV electrical apparatus and associated circuits into service | ●current |
| UEEEL0073 | Verify compliance and functionality of special LV electrical installations | ●current |
| UEEEL0074 | Wind electrical coils | ●current |
| UEEEL0075 | Inspect, test and maintain emergency alarm systems and equipment | ●current |
| UEEEL0076 | Inspect, test and maintain emergency lighting systems | ●current |
| UEEEL0078 | Install and commission whole current electricity meters | ●current |
| UEEHA0004 | Enter a classified hazardous area to undertake work related to electrical equipment | ●current |
| UEEHA0020 | Conduct detailed inspection of electrical installations for hazardous areas | ●current |
| UEEHA0022 | Determine the explosion-protection requirements to meet a specified classified hazardous area | ●current |
| UEEHA0025 | Install explosion-protected equipment and associated apparatus and wiring systems | ●current |
| UEEHA0026 | Maintain equipment associated with hazardous areas | ●current |
| UEEIC0001 | Analyse complex electronic circuits controlling fluids | ●current |
| UEEIC0002 | Assemble, enter and verify operating instructions in microprocessor equipped devices | ●current |
| UEEIC0005 | Configure and maintain industrial control system networks | ●current |
| UEEIC0009 | Develop an electrical integrated system interface for access through a touch screen | ●current |
| UEEIC0010 | Develop and test code for microcontroller devices | ●current |
| UEEIC0011 | Develop electrical integrated systems | ●current |
| UEEIC0012 | Develop structured programs to control external devices | ●current |
| UEEIC0013 | Develop, enter and verify discrete control programs for programmable controllers | ●current |
| UEEIC0014 | Develop, enter and verify programs in supervisory control and data acquisition systems | ●current |
| UEEIC0015 | Develop, enter and verify word and analogue control programs for programmable logic controllers | ●current |
| UEEIC0016 | Diagnose and rectify faults in a.c. motor drive systems | ●current |
| UEEIC0017 | Diagnose and rectify faults in d.c. motor drive systems | ●current |
| UEEIC0018 | Diagnose and rectify faults in digital controls systems | ●current |
| UEEIC0019 | Diagnose and rectify faults in servo drive systems | ●current |
| UEEIC0020 | Fault find and repair analogue circuits and components in electronic control systems | ●current |
| UEEIC0024 | Plan the electrical installation of integrated systems | ●current |
| UEEIC0026 | Provide solutions to fluid circuit operations | ●current |
| UEEIC0027 | Provide solutions to pneumatic-hydraulic system operations | ●current |
| UEEIC0028 | Provide solutions to problems in industrial control systems | ●current |
| UEEIC0034 | Set up industrial field control devices | ●current |
| UEEIC0038 | Solve problems in density/level measurement components and systems | ●current |
| UEEIC0039 | Solve problems in flow measurement components and systems | ●current |
| UEEIC0040 | Solve problems in polyphase electronic power control circuits | ●current |
| UEEIC0041 | Solve problems in pressure measurement components and systems | ●current |
| UEEIC0042 | Solve problems in single phase electronic power control circuits | ●current |
| UEEIC0043 | Solve problems in temperature measurement components and systems | ●current |
| UEEIC0047 | Use instrumentation drawings, specifications, standards and equipment manuals | ●current |
| UEERA0035 | Establish the basic operating conditions of air conditioning systems | ●current |
| UEERA0036 | Establish the basic operating conditions of vapour compression systems | ●current |
| UEERA0059 | Prepare and connect refrigerant tubing and fittings | ●current |
| UEERE0052 | Assess energy loads and uses for energy efficiency in commercial facilities | ●current |
| UEERE0053 | Assess energy loads and uses for energy efficiency in industrial properties and enterprises | ●current |
| UEERE0054 | Conduct site survey for grid-connected photovoltaic and battery storage systems | ●current |
| UEERE0061 | Design grid-connected photovoltaic power supply systems | ●current |
| UEERE0062 | Design micro-hydro systems | ●current |
| UEERE0064 | Design renewable energy heating systems | ●current |
| UEERE0065 | Design wind energy systems | ●current |
| UEERE0068 | Develop strategies to address sustainability issues for electrical installations | ●current |
| UEERE0080 | Install photovoltaic power conversion equipment to grid | ●current |
| UEERE0081 | Install photovoltaic systems to power conversion equipment | ●current |
| UETDRIS017 | Perform high voltage field switching operation to a given schedule | ●current |
| UETDRIS025 | Diagnose and resolve faults in distribution systems | ●current |
| UETDRIS026 | Diagnose and resolve faults in electrical apparatus | ●current |
| UETDRIS027 | Diagnose and resolve faults in transmission systems | ●current |
| UETDRIS032 | Solve problems in network equipment | ●current |
| UETDRIS033 | Solve problems in network protection | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEE training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day UEE50420 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.