When must new enrolments into UEE60210 stop?

New enrolments are not permitted from 16 March 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in UEE60210?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

UEE60210 Advanced Diploma of Electronics and Communications Engineering

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

UEE60210Superseded — equivalentAdvanced Diploma of Electronics and Communications Engineering
equivalent
UEE60211Superseded — equivalentAdvanced Diploma of Electronics and Communications Engineering
equivalent
UEE60220CurrentAdvanced Diploma of Electronics and Communications Engineering

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

UEE60207UEE60210equivalent28 July 2011
The register records this supersession but attaches no note on what changed.
UEE60210UEE60211equivalent15 March 2012
The register records this supersession but attaches no note on what changed.

Is UEE60210 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEE60210 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEE60210 is made of

training.gov.au lists 185 units for UEE60210. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 185 listed

Code	Unit	Core or elective	In this product
BSBINM501A	Manage an information or knowledge management system	`N/A`	not current
BSBINN502A	Build and sustain an innovative work environment	`N/A`	not current
BSBMGT502B	Manage people performance	`N/A`	not current
BSBMGT516C	Facilitate continuous improvement	`N/A`	not current
BSBWOR502B	Ensure team effectiveness	`N/A`	not current
ICTTEN3056A	Install telecommunications network equipment	`N/A`	not current
MCMS200A	Apply competitive manufacturing practices	`N/A`	not current
MCMT220A	Apply quick changeover procedures	`N/A`	not current
MCMT221A	Apply Just in Time (JIT) procedures	`N/A`	not current
MCMT240A	Apply 5S procedures in a manufacturing environment	`N/A`	not current
MCMT280A	Undertake root cause analysis	`N/A`	not current
MCMT281A	Contribute to the application of a proactive maintenance strategy	`N/A`	not current
UEENEEA001B	Assemble electronic apparatus	`N/A`	not current
UEENEEA002B	Select electronic components	`N/A`	not current
UEENEEA003B	Set up and check electronic component placement machines	`N/A`	not current
UEENEEA004B	Rework electronic sub assemblies	`N/A`	not current
UEENEEA005B	Conduct functional and quality tests on assembled electronic apparatus	`N/A`	not current
UEENEEA006B	Apply lead-free soldering techniques	`N/A`	not current
UEENEEB001B	Operate and maintain an amateur radio communication station	`N/A`	not current
UEENEEC004B	Prepare specifications for the supply of materials and equipment for electrotechnology projects	`N/A`	not current
UEENEEC005B	Estimate electrotechnology projects	`N/A`	not current
UEENEEC006B	Prepare tender submissions for electrotechnology projects	`N/A`	not current
UEENEEC007B	Manage contract variations	`N/A`	not current
UEENEED002B	Assemble, set up and test personal computers	`N/A`	not current
UEENEED003B	Evaluate and modify programs written in object oriented code	`N/A`	not current
UEENEED004B	Use engineering applications software	`N/A`	not current
UEENEED005B	Enter and verify operating instructions in microprocessor equipped devices	`N/A`	not current
UEENEED010B	Set up and create content for a web server	`N/A`	not current
UEENEED012B	Support computer hardware and software	`N/A`	not current
UEENEED025B	Design and configure Human-Machine Interface networks	`N/A`	not current

Show the remaining 155 units

Code	Unit	Core or elective	In this product
UEENEED026B	Design a computer based control system	`N/A`	not current
UEENEED027B	Develop structured programs to control external devices	`N/A`	not current
UEENEED028B	Develop and test code for microcontroller devices	`N/A`	not current
UEENEED029B	Develop basic web pages for engineering applications	`N/A`	not current
UEENEED030B	Select, install, configure and test multimedia devices	`N/A`	not current
UEENEED031B	Develop and validate basic integrated systems	`N/A`	not current
UEENEED032B	Design integrated systems	`N/A`	not current
UEENEED033B	Design complex integrated systems	`N/A`	not current
UEENEED034B	Configure and maintain industrial control system networks	`N/A`	not current
UEENEED043B	Install and configure a computer operating system and software	`N/A`	not current
UEENEED046B	Set up and configure basic local area network	`N/A`	not current
UEENEED050B	Develop control programs for microcomputer equipped devices	`N/A`	not current
UEENEED051B	Provide programming solution for engineering problems	`N/A`	not current
UEENEED052B	Design embedded controller systems	`N/A`	not current
UEENEED053B	Set up and test biometric devices	`N/A`	not current
UEENEED054B	Analyse and implement biometric techniques and applications	`N/A`	not current
UEENEED055B	Develop and validate biometric systems installation instructions	`N/A`	not current
UEENEEE001B	Apply OHS practices in the workplace	`N/A`	not current
UEENEEE002B	Dismantle, assemble and fabricate electrotechnology components	`N/A`	not current
UEENEEE003B	Solve problems in extra-low voltage single path circuits	`N/A`	not current
UEENEEE004B	Solve problems in multiple path d.c. circuits	`N/A`	not current
UEENEEE005B	Fix and secure equipment	`N/A`	not current
UEENEEE007B	Use drawings, diagrams, schedules and manuals	`N/A`	not current
UEENEEE008B	Lay wiring/cabling and terminate accessories for extra-low voltage circuits	`N/A`	not current
UEENEEE010B	Develop and implement maintenance programs	`N/A`	not current
UEENEEE011C	Manage risk in electrotechnology activities	`N/A`	not current
UEENEEE014B	Supervise and coordinate work activities	`N/A`	not current
UEENEEE015B	Develop design briefs for electrotechnology projects	`N/A`	not current
UEENEEE017B	Implement and monitor OHS policies and procedures	`N/A`	not current
UEENEEE018B	Establish, maintain and evaluate OHS systems	`N/A`	not current
UEENEEE019C	Solve problems in multiple path a.c. circuits	`N/A`	not current
UEENEEE021B	Plan an integrated cabling system	`N/A`	not current
UEENEEE022B	Carry out preparatory electrotechnology work activities	`N/A`	not current
UEENEEE023B	Solve basic problems in electronic and digital equipment	`N/A`	not current
UEENEEE024C	Compile and produce an electrotechnology report	`N/A`	not current
UEENEEE025B	Solve problems in complex multiple path circuits	`N/A`	not current
UEENEEE026B	Provide computational solutions to basic engineering problems	`N/A`	not current
UEENEEE027B	Use advanced computational processes to provide solutions to engineering problems	`N/A`	not current
UEENEEE028B	Develop engineering solutions to photonic problems	`N/A`	not current
UEENEEE029B	Solve electrotechnical problems	`N/A`	not current
UEENEEE034B	Document occupational hazards and risks in electronics	`N/A`	not current
UEENEEE038B	Participate in development and follow a personal competency development plan	`N/A`	not current
UEENEEE041B	Use of routine equipment/plant/technologies in an electrotechnology environment	`N/A`	not current
UEENEEE046B	Identify affects of energy on machinery and materials in an electrotechnology environment	`N/A`	not current
UEENEEE048C	Carry out routine work activities in an electrotechnology environment	`N/A`	not current
UEENEEE050B	Undertake computations in an electrotechnology environment	`N/A`	not current
UEENEEE060B	Provide solutions for uses of materials and thermodynamic effects	`N/A`	not current
UEENEEE063B	Analyse materials for suitability in equipment	`N/A`	not current
UEENEEE072B	Write specifications for electronics and communications engineering projects	`N/A`	not current
UEENEEE078B	Contribute to risk management in electrotechnology systems	`N/A`	not current
UEENEEE079A	Identify and select components, accessories and materials for electrotechnology work activities	`N/A`	not current
UEENEEF002B	Lay and connect cables for multiple access to telecommunication services	`N/A`	not current
UEENEEF004B	Install and modify performance data communication structured cabling	`N/A`	not current
UEENEEF005B	Install and modify performance data communication optical fibre cabling	`N/A`	not current
UEENEEF006B	Solve problems in data and voice communications circuits	`N/A`	not current
UEENEEF007B	Set up the wireless capabilities of communications and data storage devices	`N/A`	not current
UEENEEF008B	Select and arrange equipment for wireless networks	`N/A`	not current
UEENEEF009B	Install and connect voice and data communications equipment	`N/A`	not current
UEENEEF010B	Select and arrange equipment for local area networks	`N/A`	not current
UEENEEF011B	Test, report and rectify faults in voice and data installations	`N/A`	not current
UEENEEF014B	Set up and configure basic data communications systems	`N/A`	not current
UEENEEH001B	Carry out basic repairs to computer equipment by replacement of modules/sub-assemblies	`N/A`	not current
UEENEEH002B	Carry out basic repairs to electronic apparatus by replacement of components	`N/A`	not current
UEENEEH003B	Carry out routine repairs to business equipment	`N/A`	not current
UEENEEH004B	Set up and test residential audio/video equipment	`N/A`	not current
UEENEEH005B	Verify compliance and functionality of custom electronic installations	`N/A`	not current
UEENEEH006B	Assemble and set up fixed audio/video components and systems in buildings and premises	`N/A`	not current
UEENEEH007B	Carry out repairs of predictable faults in general electronic apparatus	`N/A`	not current
UEENEEH008B	Assemble and erect reception antennae and signal distribution equipment	`N/A`	not current
UEENEEH009B	Set up and test gaming/games equipment	`N/A`	not current
UEENEEH010B	Install commercial audio/video system components	`N/A`	not current
UEENEEH011B	Troubleshoot d.c. power supplies with single phase input	`N/A`	not current
UEENEEH012B	Troubleshoot digital subsystems	`N/A`	not current
UEENEEH013B	Troubleshoot amplifiers	`N/A`	not current
UEENEEH014B	Troubleshoot frequency dependent circuits	`N/A`	not current
UEENEEH015B	Develop software solutions in microcontroller based systems	`N/A`	not current
UEENEEH016B	Find and repair faults in the microwave amplifier sections in electronic apparatus	`N/A`	not current
UEENEEH017B	Carry out repairs of predictable faults in audio and video replay/recording apparatus	`N/A`	not current
UEENEEH018B	Find and repair faults in electronic apparatus	`N/A`	not current
UEENEEH019B	Carry out repairs of predictable faults in television receivers	`N/A`	not current
UEENEEH020B	Find and repair faults in gaming and games equipment	`N/A`	not current
UEENEEH021B	Find and repair faults in high volume office equipment	`N/A`	not current
UEENEEH022B	Find and repair faults in remote control apparatus	`N/A`	not current
UEENEEH023B	Find and repair faults in microwave heating apparatus	`N/A`	not current
UEENEEH024B	Carry out repairs of predictable faults in audio components	`N/A`	not current
UEENEEH025B	Provide solutions to single phase electronic power control problems	`N/A`	not current
UEENEEH026B	Provide solutions to polyphase electronic power control problems	`N/A`	not current
UEENEEH027B	Commission commercial radio frequency (RF) transmission and reception systems	`N/A`	not current
UEENEEH028B	Install microwave and antennae and waveguides	`N/A`	not current
UEENEEH029B	Diagnose and rectify faults in navigation systems	`N/A`	not current
UEENEEH030B	Diagnose and rectify faults in satellite-based surveillance and observation systems	`N/A`	not current
UEENEEH031B	Diagnose and rectify faults in radar apparatus and systems	`N/A`	not current
UEENEEH032B	Diagnose and rectify faults in global positioning systems	`N/A`	not current
UEENEEH033B	Diagnose and rectify faults in telecommunication apparatus and systems	`N/A`	not current
UEENEEH034B	Diagnose and rectify faults in electronic medical equipment	`N/A`	not current
UEENEEH035B	Design custom electronic installations	`N/A`	not current
UEENEEH036B	Design commercial audio/video installations	`N/A`	not current
UEENEEH037B	Program and commission commercial audio/video systems	`N/A`	not current
UEENEEH038B	Find and repair faults in complex power supplies	`N/A`	not current
UEENEEH039B	Troubleshoot basic amplifiers	`N/A`	not current
UEENEEH040B	Diagnose and rectify faults in sonar apparatus and systems	`N/A`	not current
UEENEEH041B	Manage electronics/computer systems projects	`N/A`	not current
UEENEEH042B	Troubleshoot oscillators	`N/A`	not current
UEENEEH043B	Diagnose and rectify faults in digital subsystems of electronic controls	`N/A`	not current
UEENEEH044B	Diagnose and rectify faults in analogue circuits and components in electronic control systems	`N/A`	not current
UEENEEH045B	Develop solutions to analogue electronic problems	`N/A`	not current
UEENEEH046B	Solve fundamental problems in electronic communications systems	`N/A`	not current
UEENEEH047B	Assess compliance of electronic apparatus	`N/A`	not current
UEENEEH048B	Design and develop advanced digital systems	`N/A`	not current
UEENEEH049B	Develop solutions to audio electronic problems	`N/A`	not current
UEENEEH050B	Assemble and set up basic wired and wireless security systems	`N/A`	not current
UEENEEH051B	Install large wired and wireless security systems	`N/A`	not current
UEENEEH052B	Enter instructions and test basic wired and wireless security systems	`N/A`	not current
UEENEEH053B	Program and test large wired and wireless security systems	`N/A`	not current
UEENEEH054B	Program and commission commercial security alarm systems	`N/A`	not current
UEENEEH055B	Program and commission commercial security access control systems	`N/A`	not current
UEENEEH056B	Program and commission commercial security closed circuit television (CCTV) systems	`N/A`	not current
UEENEEH057B	Develop basic integrated security systems plan	`N/A`	not current
UEENEEH058B	Design integrated security systems for a single site	`N/A`	not current
UEENEEH059B	Design integrated complex security systems	`N/A`	not current
UEENEEH060B	Plan electronic projects	`N/A`	not current
UEENEEH061B	Position and terminate fire detection and warning system apparatus	`N/A`	not current
UEENEEH062B	Verify compliance and functionality of fire protection installations	`N/A`	not current
UEENEEH063B	Enter and verify programs in preparation for commissioning fire protection systems	`N/A`	not current
UEENEEH064B	Commission commercial fire protection systems	`N/A`	not current
UEENEEH065B	Find and repair faults in fire protection systems	`N/A`	not current
UEENEEH066B	Fault find Microcontroller based hardware	`N/A`	not current
UEENEEH067B	Commission electronics and communications systems	`N/A`	not current
UEENEEH068B	Modify-redesign of electronics and communications system	`N/A`	not current
UEENEEH069B	Solve problems in electronic circuits	`N/A`	not current
UEENEEH070B	Terminate and connect components, conductors, wiring and cables for electronic circuits	`N/A`	not current
UEENEEH071B	Find and repair faults in television receivers	`N/A`	not current
UEENEEH072C	Find and repair faults in communication systems	`N/A`	not current
UEENEEH073B	Find and repair faults in professional audio reproduction components	`N/A`	not current
UEENEEH074B	Find and repair faults in audio/video recording equipment	`N/A`	not current
UEENEEH075B	Find and rectify faults and malfunctions in security system installations	`N/A`	not current
UEENEEH076B	Diagnose and rectify faults in display circuits	`N/A`	not current
UEENEEH077B	Diagnose and rectify faults in recording and replay apparatus	`N/A`	not current
UEENEEH078B	Diagnose and rectify faults in camera circuits	`N/A`	not current
UEENEEH079B	Diagnose and rectify faults in digital television apparatus	`N/A`	not current
UEENEEH080B	Diagnose and rectify faults in digital transmission systems	`N/A`	not current
UEENEEH081B	Design printed circuit boards	`N/A`	not current
UEENEEH082B	Develop solutions to RF amplifier problems	`N/A`	not current
UEENEEH083B	Analyse the performance of wireless-based electronic systems	`N/A`	not current
UEENEEH084B	Modify DSP based sub-systems	`N/A`	not current
UEENEEH085B	Design a signal-conditioning subsystem	`N/A`	not current
UEENEEH086B	Commission microwave and satellite communication systems	`N/A`	not current
UEENEEH087B	Solve problems in musical equipment circuits	`N/A`	not current
UEENEEH088B	Design and develop electronics/computer systems project	`N/A`	not current
UEENEEI001B	Install and set up transducers and sensing devices	`N/A`	not current
UEENEEI017B	Calibrate and test measuring instruments	`N/A`	not current
UEENEEI020B	Provide solutions to problems in basic industrial control systems	`N/A`	not current
UEENEEI023B	Design electronic control systems	`N/A`	not current
UEENEEI030B	Set up electronically controlled robotically operated complex systems	`N/A`	not current
UEENEEK045A	Implement and monitor, policies procedures for environmentally sustainable electrotech work practice	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Is UEE60210 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.