Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEE60920 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEE60920 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEE60920 is made of
training.gov.au lists 81 units for UEE60920: 19 core and 62 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 19 listed
| Code | Unit | In this product |
|---|---|---|
| UEECD0003 | Apply industry and community standards to engineering activities | ●current |
| UEECD0004 | Apply material science to solving electrotechnology engineering problems | ●current |
| UEECD0005 | Apply physics to solving electrotechnology engineering problems | ●current |
| UEECD0010 | Compile and produce an energy sector detailed report | ●current |
| UEECD0014 | Develop design briefs for electrotechnology projects | ●current |
| UEECD0017 | Establish and follow a competency development plan in an electrotechnology engineering discipline | ●current |
| UEECD0024 | Implement and monitor energy sector WHS policies and procedures | ●current |
| UEECD0026 | Manage risk in electrotechnology activities | ●current |
| UEECD0036 | Provide engineering solutions for problems in complex multiple path circuits | ●current |
| UEECD0039 | Provide solutions to basic engineering computational problems | ●current |
| UEECD0056 | Apply methods to maintain currency of industry developments | ●current |
| UEECD0062 | Write specifications for renewable energy engineering projects | ●current |
| UEECS0033 | Use engineering applications software on personal computers | ●current |
| UEEEL0062 | Provide engineering solutions to problems in complex polyphase power circuits | ●current |
| UEERE0013 | Develop strategies to address environmental and sustainability issues in the energy sector | ●current |
| UEERE0025 | Carry out basic repairs to renewable energy (RE) apparatus | !not current |
| UEERE0042 | Manage renewable energy (RE) projects | !not current |
| UEERE0044 | Plan renewable energy (RE) projects | !not current |
| UEERE0046 | Solve problems in stand-alone renewable energy (RE) systems | !not current |
Elective units 62 listed
| Code | Unit | In this product |
|---|---|---|
| BSBINS501 | Implement information and knowledge management systems | ●current |
| BSBLDR522 | Manage people performance | ●current |
| BSBSTR501 | Establish innovative work environments | ●current |
| BSBSTR502 | Facilitate continuous improvement | ●current |
| BSBTWK502 | Manage team effectiveness | ●current |
| UEECD0001 | Analyse materials for suitability in electrical equipment | ●current |
| UEECD0002 | Analyse static and dynamic parameters of electrical equipment | ●current |
| UEECD0012 | Contribute to risk management in electrotechnology systems | ●current |
| UEECD0013 | Develop and implement energy sector maintenance programs | ●current |
| UEECD0029 | Plan electrotechnology projects | ●current |
| UEECD0030 | Prepare electrotechnology/utilities drawings using manual drafting and CAD equipment and software | ●current |
| UEECD0031 | Prepare engineering drawings using manual drafting and CAD for electrotechnology applications | ●current |
| UEECD0032 | Produce detailed electrotechnology/utilities drawings using CAD equipment and software | ●current |
| UEECD0037 | Provide engineering solutions for uses of materials and thermodynamic effects | ●current |
| UEECD0049 | Use advanced computational processes to provide solutions to energy sector engineering problems | ●current |
| UEECD0057 | Manage electrotechnology projects | ●current |
| UEECO0001 | Estimate electrotechnology projects | ●current |
| UEECO0003 | Manage contract variations | ●current |
| UEECO0014 | Prepare tender submissions for electrotechnology projects | ●current |
| UEEEC0060 | Repairs basic electronic apparatus faults by replacement of components | ●current |
| UEEEC0075 | Troubleshoot single phase input d.c power supplies | ●current |
| UEEEL0006 | Develop detailed and complex drawings for electrical systems using CAD systems | ●current |
| UEEEL0007 | Develop detailed electrical drawings | ●current |
| UEEEL0027 | Carry out low voltage electrical field testing and report findings | ●current |
| UEEEL0035 | Design effective and efficient lighting for public, open and sports areas | ●current |
| UEEEL0037 | Design electrical installations with a low voltage demand greater than 400 A per phase | ●current |
| UEEEL0038 | Design switchboards rated for high fault levels (greater than 400 A) | ●current |
| UEEEL0040 | Develop compliance policies and plans to conduct an electrical contracting business | ●current |
| UEEEL0050 | Install and replace low voltage current transformer metering | ●current |
| UEEEL0057 | Plan electrical installations with a low voltage demand up to 400 A per phase | ●current |
Show the remaining 32 elective units
| Code | Unit | In this product |
|---|---|---|
| UEEEL0059 | Plan low voltage switchboard and control panel layouts | ●current |
| UEEEL0071 | Select low voltage power factor correction equipment | ●current |
| UEEEL0072 | Set up and place LV electrical apparatus and associated circuits into service | ●current |
| UEEEL0078 | Install and commission whole current electricity meters | ●current |
| UEEIC0002 | Assemble, enter and verify operating instructions in microprocessor equipped devices | ●current |
| UEEIC0010 | Develop and test code for microcontroller devices | ●current |
| UEEIC0013 | Develop, enter and verify discrete control programs for programmable controllers | ●current |
| UEEIC0014 | Develop, enter and verify programs in supervisory control and data acquisition systems | ●current |
| UEEIC0015 | Develop, enter and verify word and analogue control programs for programmable logic controllers | ●current |
| UEERE0003 | Assess energy loads and uses for energy efficiency in commercial facilities | !not current |
| UEERE0004 | Assess energy loads and uses for energy efficiency in industrial properties and enterprises | !not current |
| UEERE0005 | Assess energy loads and uses for energy efficiency in residential, office and retail premises | !not current |
| UEERE0010 | Design energy management controls for electrical installations in buildings | !not current |
| UEERE0011 | Design grid-connected photovoltaic power supply systems | !not current |
| UEERE0012 | Develop effective engineering strategies for energy reduction in buildings | !not current |
| UEERE0014 | Develop strategies to address sustainability issues for electrical installations | !not current |
| UEERE0016 | Install, configure and commission LV grid-connected photovoltaic power systems | !not current |
| UEERE0022 | Solve basic problems in photovoltaic energy apparatus and systems | !not current |
| UEERE0028 | Design hybrid renewable power systems | !not current |
| UEERE0029 | Design micro-hydro systems rated to 6.4 kW | !not current |
| UEERE0030 | Design renewable energy (RE) heating systems | !not current |
| UEERE0031 | Design stand-alone renewable energy (RE) systems | !not current |
| UEERE0032 | Design wind energy conversion systems (WECS) rated to 10 kW | !not current |
| UEERE0033 | Develop engineering solutions to renewable energy (RE) problems | !not current |
| UEERE0034 | Diagnose and rectify faults in renewable energy (RE) control systems | !not current |
| UEERE0035 | Install ELV stand-alone photovoltaic power systems | !not current |
| UEERE0036 | Install small wind energy conversion systems rated up to 10 kW for ELV stand-alone applications | !not current |
| UEERE0037 | Install, configure and commission LV micro-hydro systems rated up to 6.4 kW | !not current |
| UEERE0038 | Install, configure and commission LV wind energy conversion systems rated up to 10 kW | !not current |
| UEERE0039 | Install, set up and maintain ELV micro-hydro systems rated up to 6.4 kW | !not current |
| UEERE0045 | Solve basic problems in micro-hydro systems | !not current |
| UEERE0047 | Solve problems in wind energy conversion systems (WECS) rated up to 10 kW | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEE training product on the register · Search all training products
Is UEE60920 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.