Where the register points next
training.gov.au points at nothing after UEE63020: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEE63020 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEE63020 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEE63020 is made of
training.gov.au lists 150 units for UEE63020: 17 core and 133 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 17 listed
| Code | Unit | In this product |
|---|---|---|
| UEECD0003 | Apply industry and community standards to engineering activities | ●current |
| UEECD0004 | Apply material science to solving electrotechnology engineering problems | ●current |
| UEECD0005 | Apply physics to solving electrotechnology engineering problems | ●current |
| UEECD0010 | Compile and produce an energy sector detailed report | ●current |
| UEECD0014 | Develop design briefs for electrotechnology projects | ●current |
| UEECD0017 | Establish and follow a competency development plan in an electrotechnology engineering discipline | ●current |
| UEECD0024 | Implement and monitor energy sector WHS policies and procedures | ●current |
| UEECD0026 | Manage risk in electrotechnology activities | ●current |
| UEECD0036 | Provide engineering solutions for problems in complex multiple path circuits | ●current |
| UEECD0039 | Provide solutions to basic engineering computational problems | ●current |
| UEECD0056 | Apply methods to maintain currency of industry developments | ●current |
| UEECD0059 | Write specifications for electrical engineering projects | ●current |
| UEECS0033 | Use engineering applications software on personal computers | ●current |
| UEEEL0015 | Manage large electrical projects | ●current |
| UEEEL0058 | Plan large electrical projects | ●current |
| UEEEL0062 | Provide engineering solutions to problems in complex polyphase power circuits | ●current |
| UEERE0013 | Develop strategies to address environmental and sustainability issues in the energy sector | ●current |
Elective units 133 listed
| Code | Unit | In this product |
|---|---|---|
| BSBINS501 | Implement information and knowledge management systems | ●current |
| BSBLDR522 | Manage people performance | ●current |
| BSBSTR501 | Establish innovative work environments | ●current |
| BSBSTR502 | Facilitate continuous improvement | ●current |
| BSBTWK502 | Manage team effectiveness | ●current |
| UEEAS0007 | Assemble, mount and connect control gear and switchgear | ●current |
| UEEAS0008 | Fabricate and assemble bus bars | ●current |
| UEEAS0009 | Mount and wire control panel equipment | ●current |
| UEECD0001 | Analyse materials for suitability in electrical equipment | ●current |
| UEECD0002 | Analyse static and dynamic parameters of electrical equipment | ●current |
| UEECD0012 | Contribute to risk management in electrotechnology systems | ●current |
| UEECD0013 | Develop and implement energy sector maintenance programs | ●current |
| UEECD0015 | Develop engineering solutions to photonic system problems | ●current |
| UEECD0037 | Provide engineering solutions for uses of materials and thermodynamic effects | ●current |
| UEECD0049 | Use advanced computational processes to provide solutions to energy sector engineering problems | ●current |
| UEECD0062 | Write specifications for renewable energy engineering projects | ●current |
| UEECO0001 | Estimate electrotechnology projects | ●current |
| UEECO0003 | Manage contract variations | ●current |
| UEECO0014 | Prepare tender submissions for electrotechnology projects | ●current |
| UEEEC0003 | Assemble and set up basic security systems | ●current |
| UEEEC0005 | Assess electronic apparatus compliance | ●current |
| UEEEC0011 | Design and develop electronics/computer systems projects | ●current |
| UEEEC0014 | Design signal-conditioning sub-systems | ●current |
| UEEEC0045 | Modify digital signal processing (DSP) based sub-systems | ●current |
| UEEEC0060 | Repairs basic electronic apparatus faults by replacement of components | ●current |
| UEEEC0075 | Troubleshoot single phase input d.c power supplies | ●current |
| UEEEL0004 | Carry out basic repairs to electrical components and equipment | ●current |
| UEEEL0006 | Develop detailed and complex drawings for electrical systems using CAD systems | ●current |
| UEEEL0007 | Develop detailed electrical drawings | ●current |
| UEEEL0011 | Evaluate performance of low voltage electrical apparatus | ●current |
Show the remaining 103 elective units
| Code | Unit | In this product |
|---|---|---|
| UEEEL0016 | Provide advice on effective and energy efficient lighting products | ●current |
| UEEEL0017 | Repair and maintain mechanical components of electrical machines | ●current |
| UEEEL0018 | Select wiring systems and select cables for low voltage electrical installations | ●current |
| UEEEL0022 | Supply effective and efficient lighting products for domestic and small commercial applications | ●current |
| UEEEL0026 | Align and install traction lift equipment | ●current |
| UEEEL0032 | Conduct electrical tests on HV electrical machines | ●current |
| UEEEL0033 | Conduct electrical tests on LV electrical machines | ●current |
| UEEEL0034 | Conduct mechanical tests on electrical machines and components | ●current |
| UEEEL0035 | Design effective and efficient lighting for public, open and sports areas | ●current |
| UEEEL0036 | Design effective and efficient lighting for residential and commercial buildings | ●current |
| UEEEL0037 | Design electrical installations with a low voltage demand greater than 400 A per phase | ●current |
| UEEEL0038 | Design switchboards rated for high fault levels (greater than 400 A) | ●current |
| UEEEL0040 | Develop compliance policies and plans to conduct an electrical contracting business | ●current |
| UEEEL0041 | Develop engineering solution for synchronous machine and control problems | ●current |
| UEEEL0042 | Develop engineering solutions for d.c. machine and control problems | ●current |
| UEEEL0043 | Develop engineering solutions for induction machine and control problems | ●current |
| UEEEL0044 | Diagnose and rectify faults in complex lift systems | ●current |
| UEEEL0045 | Diagnose and rectify faults in traction lift systems | ●current |
| UEEEL0046 | Find and repair faults in LV d.c. electrical apparatus and circuits | ●current |
| UEEEL0051 | Investigate and report on electrical incidents and causes | ●current |
| UEEEL0052 | Maintain and service traction lift systems and equipment | ●current |
| UEEEL0053 | Maintain operation of electrical marine equipment and systems | ●current |
| UEEEL0054 | Maintain operation of electrical mining equipment and systems | ●current |
| UEEEL0055 | Overhaul and repair major switchgear and control gear | ●current |
| UEEEL0056 | Place and connect electrical coils | ●current |
| UEEEL0057 | Plan electrical installations with a low voltage demand up to 400 A per phase | ●current |
| UEEEL0059 | Plan low voltage switchboard and control panel layouts | ●current |
| UEEEL0060 | Prepare quotations for the supply of effective and efficient lighting products for lighting projects | ●current |
| UEEEL0061 | Provide advice on the application of energy efficient lighting for ambient and aesthetic effect | ●current |
| UEEEL0063 | Provide photometric data for illumination system design | ●current |
| UEEEL0064 | Rewind HV three phase induction machines rated for voltages above 3.3 kV | ●current |
| UEEEL0065 | Rewind HV three phase induction machines rated for voltages to 3.3 kV | ●current |
| UEEEL0066 | Rewind LV direct current machines | ●current |
| UEEEL0067 | Rewind single phase machines | ●current |
| UEEEL0068 | Rewind three phase low voltage induction machines | ●current |
| UEEEL0069 | Select and arrange equipment for special LV electrical installations | ●current |
| UEEEL0070 | Select effective and efficient light sources and luminaries for given locations and designs | ●current |
| UEEEL0072 | Set up and place LV electrical apparatus and associated circuits into service | ●current |
| UEEEL0074 | Wind electrical coils | ●current |
| UEEEL0075 | Inspect, test and maintain emergency alarm systems and equipment | ●current |
| UEEEL0076 | Inspect, test and maintain emergency lighting systems | ●current |
| UEEEL0078 | Install and commission whole current electricity meters | ●current |
| UEEHA0004 | Enter a classified hazardous area to undertake work related to electrical equipment | ●current |
| UEEHA0008 | Design gas detection systems | ●current |
| UEEHA0020 | Conduct detailed inspection of electrical installations for hazardous areas | ●current |
| UEEHA0022 | Determine the explosion-protection requirements to meet a specified classified hazardous area | ●current |
| UEEHA0023 | Develop and manage periodic electrical inspection and maintenance programs for hazardous areas | ●current |
| UEEHA0026 | Maintain equipment associated with hazardous areas | ●current |
| UEEHA0029 | Plan electrical installations for hazardous areas | ●current |
| UEEHA0038 | Conduct visual and close inspection of electrical installations for hazardous areas | ●current |
| UEEIC0001 | Analyse complex electronic circuits controlling fluids | ●current |
| UEEIC0002 | Assemble, enter and verify operating instructions in microprocessor equipped devices | ●current |
| UEEIC0005 | Configure and maintain industrial control system networks | ●current |
| UEEIC0006 | Design and configure Human-Machine Interface (HMI) networks | ●current |
| UEEIC0007 | Design and use advanced programming tools, PC networks and HMI Interfacing | ●current |
| UEEIC0008 | Design electronic control systems | ●current |
| UEEIC0009 | Develop an electrical integrated system interface for access through a touch screen | ●current |
| UEEIC0010 | Develop and test code for microcontroller devices | ●current |
| UEEIC0011 | Develop electrical integrated systems | ●current |
| UEEIC0012 | Develop structured programs to control external devices | ●current |
| UEEIC0013 | Develop, enter and verify discrete control programs for programmable controllers | ●current |
| UEEIC0014 | Develop, enter and verify programs in supervisory control and data acquisition systems | ●current |
| UEEIC0015 | Develop, enter and verify word and analogue control programs for programmable logic controllers | ●current |
| UEEIC0016 | Diagnose and rectify faults in a.c. motor drive systems | ●current |
| UEEIC0017 | Diagnose and rectify faults in d.c. motor drive systems | ●current |
| UEEIC0018 | Diagnose and rectify faults in digital controls systems | ●current |
| UEEIC0019 | Diagnose and rectify faults in servo drive systems | ●current |
| UEEIC0020 | Fault find and repair analogue circuits and components in electronic control systems | ●current |
| UEEIC0024 | Plan the electrical installation of integrated systems | ●current |
| UEEIC0025 | Provide solutions to extra-low voltage (ELV) electro-pneumatic control systems and drives | ●current |
| UEEIC0026 | Provide solutions to fluid circuit operations | ●current |
| UEEIC0027 | Provide solutions to pneumatic-hydraulic system operations | ●current |
| UEEIC0028 | Provide solutions to problems in industrial control systems | ●current |
| UEEIC0032 | Set up electronically controlled robotically operated complex systems | ●current |
| UEEIC0034 | Set up industrial field control devices | ●current |
| UEEIC0038 | Solve problems in density/level measurement components and systems | ●current |
| UEEIC0039 | Solve problems in flow measurement components and systems | ●current |
| UEEIC0040 | Solve problems in polyphase electronic power control circuits | ●current |
| UEEIC0041 | Solve problems in pressure measurement components and systems | ●current |
| UEEIC0042 | Solve problems in single phase electronic power control circuits | ●current |
| UEEIC0043 | Solve problems in temperature measurement components and systems | ●current |
| UEEIC0047 | Use instrumentation drawings, specifications, standards and equipment manuals | ●current |
| UEERA0035 | Establish the basic operating conditions of air conditioning systems | ●current |
| UEERA0036 | Establish the basic operating conditions of vapour compression systems | ●current |
| UEERA0059 | Prepare and connect refrigerant tubing and fittings | ●current |
| UEERE0055 | Conduct site survey for off-grid photovoltaic/generating set systems | ●current |
| UEERE0059 | Design energy management controls for electrical installations in buildings | ●current |
| UEERE0062 | Design micro-hydro systems | ●current |
| UEERE0063 | Design off-grid photovoltaic/generating set systems | ●current |
| UEERE0064 | Design renewable energy heating systems | ●current |
| UEERE0065 | Design wind energy systems | ●current |
| UEERE0066 | Develop effective engineering strategies for energy reduction in buildings | ●current |
| UEERE0067 | Develop engineering solutions to renewable energy (RE) problems | ●current |
| UETDRIS017 | Perform high voltage field switching operation to a given schedule | ●current |
| UETDRIS018 | Perform low voltage field switching operation to a given schedule | ●current |
| UETDRIS025 | Diagnose and resolve faults in distribution systems | ●current |
| UETDRIS026 | Diagnose and resolve faults in electrical apparatus | ●current |
| UETDRIS027 | Diagnose and resolve faults in transmission systems | ●current |
| UETDRIS031 | Maintain insulating oil | ●current |
| UETDRIS032 | Solve problems in network equipment | ●current |
| UETDRIS033 | Solve problems in network protection | ●current |
| UETDRSB001 | Perform substation switching operations to a given schedule | ●current |
| UETDRSB010 | Maintain capacitor bank equipment | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEE training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day UEE63020 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.