UEP50406 Diploma of ESI Generation (Electrical/Electronic)

deletedthe status token training.gov.au records

Item 14

The two years of s 14(1)(b), counted from the date this product was removed from the National Register, ended before the instrument commenced on 1 July 2025 — so no completion date is shown here: the instrument imposes nothing before that day.

For an RTO registered by ASQA, nobody may be allowed to commence training and assessment in UEP50406 today. training.gov.au lists it as Deleted, and s 14(2) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025) requires the organisation to ensure it does not allow individuals to commence training and assessment in a training product that has expired, been removed or deleted from the National Register. s 14(2) carries no transition period of its own and no date to compute, and the “unless otherwise approved by the National VET Regulator” opening sits in s 14(1) only. It governs starts, not learners already enrolled: s 14(2) sets no date of its own for them — their completion period under s 14(1)(b)/(c) is stated separately on this page. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for UEP50406, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Qualification
Training package
UEP06 — Electricity Supply Industry - Generation Sector Training Package
Currency period ends
23 July 2012
Latest release
Release 1 · 7 November 2006
Supersedes
UTP50198
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from UEP50406. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UTP50198UEP50406not equivalent6 November 2006

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for UEP50406 and for its training package UEP06 (release 1.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • UEP50406_R1.docxUEP50406 release 1 · product document · published 26 November 2024
  • UEP50406_R1.pdfUEP50406 release 1 · product document · published 20 July 2012

Is UEP50406 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEP50406 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEP50406 is made of

training.gov.au lists 13 units for UEP50406. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 13 listed

CodeUnitCore or electiveIn this product
UEPMNT501ADiagnose and Repair Faults in Electrical and Electronic SystemsN/Anot current
UEPMNT502ATest and Commission Electronic Electrical SystemsN/Anot current
UEPMNT503ADiagnose and Repair Faults in Instrumentation SystemsN/Anot current
UEPMNT504ATest and Commission Instrumentation SystemsN/Anot current
UEPOPS203AOperate and Monitor Communications SystemN/Anot current
UEPOPS337AMaintain Quality Systems Within the TeamN/Anot current
UEPOPS417AMonitor and Implement Environmental Plans and ProceduresN/Anot current
UEPOPS442AMonitor and Coordinate the Operation of a Combined Cycle Gas Turbine UnitN/Anot current
UEPOPS501AManage Occupational Health and Safety Policy and ProceduresN/Anot current
UEPOPS509AManage Quality Control ProceduresN/Anot current
UEPOPS510AMonitor Power Generation Plant ReliabilityN/Anot current
UEPOPS511ATune Process Plant and EquipmentN/Anot current
UEPOPS513AManage Operational Crisis to Maintain/Restore Power System IntegrityN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEP training product on the register · Search all training products

Take this with you — one email with how the register lists UEP50406 today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is UEP50406 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.