UET20110 Certificate II in ESI - Vegetation Control

Supersededtraining.gov.au: supersededEquivalent

The currency period for UET20110 ended on 29 April 2012 — 14 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 1 May 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UET09 — Transmission, Distribution and Rail Sector Training Package
Currency period ends
29 April 2012
Latest release
Release 1 · 21 July 2011
Supersedes
UET20109
Superseded by
UET20312 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UET20110Superseded — equivalentCertificate II in ESI - Vegetation Control
  2. equivalent
  3. UET20312Superseded — equivalentCertificate II in ESI - Powerline Vegetation Control
  4. equivalent
  5. UET20319Superseded — equivalentCertificate II in ESI - Powerline Vegetation Control
  6. equivalent
  7. UET20321CurrentCertificate II in ESI - Powerline Vegetation Control

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UET20109UET20110equivalent20 July 2011

    The register records this supersession but attaches no note on what changed.

  • UET20110UET20312equivalent30 April 2012

    The register records this supersession but attaches no note on what changed.

Is UET20110 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UET20110 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UET20110 is made of

training.gov.au lists 11 units for UET20110. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 11 listed

CodeUnitCore or electiveIn this product
UEENEEE001BApply OHS practices in the workplaceN/Anot current
UETTDREL03BComply with environmental and incidental response proceduresN/Anot current
UETTDREL04BWorking safely near live electrical apparatus as non electrical workerN/Anot current
UETTDRVC01BCut vegetation above ground outside live work zone near live electrical apparatus (climbing)N/Anot current
UETTDRVC02BOperate vegetation control plant, machinery and equipment near live electrical apparatusN/Anot current
UETTDRVC03BPlan for the removal of vegetation up to vegetation exclusion zone near live electrical apparatusN/Anot current
UETTDRVC04BAssess vegetation and recommend control measures for work near live electrical apparatusN/Anot current
UETTDRVC05BCut vegetation above ground outside live work zone near live electrical apparatus (platform)N/Anot current
UETTDRVC06BCut vegetation at ground level outside 'vegetation exclusion zone' near live electrical apparatusN/Anot current
UETTDRVC07BMonitor safety compliance for vegetation work near live electrical apparatusN/Anot current
UETTDRVC08BSafe use of Elevating Work Platform (EWP) near live electrical apparatusN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UET training product on the register · Search all training products

Is UET20110 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.