UET30919 Certificate III in ESI - Remote Community Utilities Worker

Supersededtraining.gov.au: supersededEquivalent

The currency period for UET30919 ended on 18 September 2021 — 4 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 20 September 2022 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UET — Transmission, Distribution and Rail Sector
Currency period ends
18 September 2021
Latest release
Release 1 · 25 September 2019
Supersedes
UET30912
Superseded by
UET30921 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UET30919Superseded — equivalentCertificate III in ESI - Remote Community Utilities Worker
  2. equivalent
  3. UET30921CurrentCertificate III in ESI - Very Remote Community Utilities

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UET30912UET30919equivalent24 September 2019

    The register records this supersession but attaches no note on what changed.

  • UET30919UET30921equivalent19 September 2021

    The register records this supersession but attaches no note on what changed.

Is UET30919 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UET30919 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UET30919 is made of

training.gov.au lists 41 units for UET30919: 16 core and 25 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 16 listed

CodeUnitIn this product
UEENEEE101AApply Occupational Health and Safety regulations, codes and practices in the workplacenot current
UEENEEE102AFabricate, assemble and dismantle utilities industry componentsnot current
UEENEEE103ASolve problems in ELV single path circuitsnot current
UEENEEE105AFix and secure electrotechnology equipmentnot current
UEENEEE107AUse drawings, diagrams, schedules, standards, codes and specificationsnot current
UEENEEE137ADocument and apply measures to control OHS risks associated with electrotechnology worknot current
UEENEEK101AMaintain safety and tidiness of remote area power supply systemsnot current
UEENEEK102AWork safely with remote area power supply systemsnot current
UEENEEK116AMaintain and repair remote area power generation facilitiesnot current
UEENEEK120AMaintain operation of remote area power generation plantnot current
UETTDREL11Apply sustainable energy and environmental proceduresnot current
UETTDREL12Operate plant and equipment near live electrical conductors and apparatusnot current
UETTDREL16Working safely near live electrical apparatusnot current
UETTDRIS32Solve electrical problems in remote community network apparatusnot current
UETTDRIS33Solve electrical problems in remote community network systemsnot current
UETTDRIS99Test and verify distribution remote area installationsnot current

Elective units 25 listed

CodeUnitIn this product
AHCMOM213Operate and maintain chainsawscurrent
CPCCLDG3001ALicence to perform doggingnot current
NWPGEN007Sample and test drinking waternot current
NWPTRT001Operate and control water treatment processesnot current
TLILIC0002Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)not current
TLILIC0005Licence to operate a boom-type elevating work platform (boom length 11 metres or more)current
UEENEEE131ASolve problems in ELV circuits for non electrical workersnot current
UEENEEK103AConduct periodic maintenance of remote area power supply battery banksnot current
UEENEEK104AConduct periodic maintenance of remote area power supply generator setsnot current
UEENEEK105AConduct periodic maintenance of remote area power supply photo voltaic arraysnot current
UEENEEK106AConduct periodic maintenance of remote area power supply wind generatorsnot current
UEENEEP024AAttach cords and plugs to electrical equipment for connection to a single phase 230 Volt supplynot current
UEENEEP026AConduct in-service safety testing of electrical cord connected equipment and cord assembliesnot current
UETTDRCJ21Lay ESI electrical cablesnot current
UETTDRCJ26Install and maintain de-energised low voltage underground polymeric cablesnot current
UETTDRCJ27Install and maintain de-energised high voltage underground polymeric cablesnot current
UETTDRDP11Inspect overhead poles-structures and electrical apparatusnot current
UETTDRIS34Install and replace energy meters and associated equipment in remote communitiesnot current
UETTDRIS35Perform remote community network field switching to a given schedulenot current
UETTDRIS36Install and maintain low voltage services in remote communities (overhead)not current
UETTDRIS37Install and maintain low voltage services in remote communities (underground)not current
UETTDRIS38Install and maintain public lighting systems in remote communitiesnot current
UETTDRIS52Install and maintain poles, structures and associated hardwarenot current
UETTDRIS54Install and maintain poles, structures and overhead conductors and cablesnot current
UETTDRIS55Install and maintain low voltage underground servicesnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UET training product on the register · Search all training products

Is UET30919 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.