AHC40210 Certificate IV in Poultry Production

deletedthe status token training.gov.au records

Item 14

The two years of s 14(1)(b), counted from the date this product was removed from the National Register, ended before the instrument commenced on 1 July 2025 — so no completion date is shown here: the instrument imposes nothing before that day.

For an RTO registered by ASQA, nobody may be allowed to commence training and assessment in AHC40210 today. training.gov.au lists it as Deleted, and s 14(2) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025) requires the organisation to ensure it does not allow individuals to commence training and assessment in a training product that has expired, been removed or deleted from the National Register. s 14(2) carries no transition period of its own and no date to compute, and the “unless otherwise approved by the National VET Regulator” opening sits in s 14(1) only. It governs starts, not learners already enrolled: s 14(2) sets no date of its own for them — their completion period under s 14(1)(b)/(c) is stated separately on this page. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for AHC40210, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Qualification
Training package
AHC10 — Agriculture, Horticulture and Conservation and Land Management
Currency period ends
25 June 2016
Latest release
Release 3 · 16 August 2013 · 3 releases in all
Supersedes
RTE40103
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from AHC40210. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • RTE40103AHC40210not equivalent9 June 2011

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for AHC40210 and for its training package AHC10 (release 8.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • AHC40210_R3.docxAHC40210 release 3 · product document · published 26 November 2024
  • AHC40210_R3.pdfAHC40210 release 3 · product document · published 17 August 2013

Is AHC40210 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AHC40210 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AHC40210 is made of

training.gov.au lists 18 units for AHC40210: 5 core and 13 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 5 listed

CodeUnitIn this product
AHCLSK401ADevelop feeding plans for a production systemnot current
AHCLSK404AImplement and monitor animal welfare programsnot current
AHCLSK405AImplement intensive production systemsnot current
AHCLSK407APlan and monitor intensive production systemsnot current
AHCLSK409ASupervise animal health programsnot current

Elective units 13 listed

CodeUnitIn this product
AHCAGB402AAnalyse and interpret production datanot current
AHCBIO302AIdentify and report unusual disease or plant pest signsnot current
AHCCHM401AMinimise risks in the use of chemicalsnot current
AHCCHM402APlan and implement a chemical use programnot current
AHCOHS401AMaintain occupational health and safety (OHS) processesnot current
AHCPLY402ASupervise free-range poultry operationsnot current
AHCWRK401AImplement and monitor quality assurance proceduresnot current
AHCWRK403ASupervise work routines and staff performancenot current
BSBINM401AIMPLEMENT WORKPLACE INFORMATION SYSTEMnot current
BSBRES401AAnalyse and present research informationnot current
FDFFS2001AImplement the food safety program and proceduresnot current
FDFFS3001AMonitor the implementation of quality and food safety programsnot current
SIRXSLS303Build relationships with customersnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AHC training product on the register · Search all training products

Take this with you — one email with how the register lists AHC40210 today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is AHC40210 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.