AUM20113 Certificate II in Automotive Manufacturing Production - Passenger Motor Vehicle

Supersededtraining.gov.au: supersededEquivalent

The currency period for AUM20113 ended on 10 December 2018 — 7 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 12 December 2019 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
AUM — Automotive Manufacturing
Currency period ends
10 December 2018
Latest release
Release 1 · 10 January 2014
Supersedes
AUM20112
Superseded by
AUM20118 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. AUM20113Superseded — equivalentCertificate II in Automotive Manufacturing Production - Passenger Motor Vehicle
  2. equivalent
  3. AUM20118Deleted from the registerCertificate II in Automotive Manufacturing Production - Passenger Motor Vehicle

The register does not list a current endpoint for this chain: AUM20118 is the last product it points at, and AUM20118 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • AUM20112AUM20113equivalent9 January 2014

    The register records this supersession but attaches no note on what changed.

  • AUM20113AUM20118equivalent11 December 2018

    The register records this supersession but attaches no note on what changed.

Is AUM20113 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AUM20113 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AUM20113 is made of

training.gov.au lists 17 units for AUM20113: 6 core and 11 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 6 listed

CodeUnitIn this product
AUMAFA002Maintain workplace relationshipsnot current
AUMAMA001Contribute to production goalscurrent
AUMAMA002Work effectively in teamscurrent
AUMASA001Apply safe work practices in the automotive manufacturing environmentnot current
AUMATK002Prepare and operate tools, equipment and machinerycurrent
AUMFBM001Prepare and process automotive materials and componentscurrent

Elective units 11 listed

CodeUnitIn this product
AUMATK003Monitor and maintain automotive equipmentnot current
AUMFBK001Receive and dispatch vehicle componentsnot current
AUMFQM001Apply continuous improvement in automotive manufacturingcurrent
AURAEA2002Apply environmental and sustainability best practice in an automotive workplacenot current
MSAENV272BParticipate in environmentally sustainable work practicesnot current
MSS402001AApply competitive systems and practicesnot current
MSS402002ASustain process improvementsnot current
MSS402010AManage the impact of change on own worknot current
MSS402040AApply 5S proceduresnot current
MSS402051AApply quality standardsnot current
MSS402080AUndertake root cause analysisnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AUM training product on the register · Search all training products

Is AUM20113 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.