Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Official documents on the register
What training.gov.au lists for AUM20213 and for its training package AUM (release 3.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.
Is AUM20213 on your scope?
This page is the register's record of one product. What it cannot tell you is whether AUM20213 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What AUM20213 is made of
training.gov.au lists 34 units for AUM20213: 5 core and 29 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 5 listed
| Code | Unit | In this product |
|---|---|---|
| AUMAMA002 | Work effectively in teams | ●current |
| AUMASA001 | Apply safe work practices in the automotive manufacturing environment | !not current |
| AUMATK002 | Prepare and operate tools, equipment and machinery | ●current |
| AUMGTA001 | Read and interpret work orders and working drawings | !not current |
| AUMGTM001 | Assemble vehicle components | ●current |
Elective units 29 listed
| Code | Unit | In this product |
|---|---|---|
| AUMAMA001 | Contribute to production goals | ●current |
| AUMATK003 | Monitor and maintain automotive equipment | !not current |
| AUMATS001 | Stamp and press vehicle parts | !not current |
| AUMFBM001 | Prepare and process automotive materials and components | ●current |
| AUMFQM001 | Apply continuous improvement in automotive manufacturing | ●current |
| AUMGCA001 | Provide customer service | ●current |
| AUMGQA001 | Apply workplace technical quality standards | ●current |
| AUMGTG001 | Install fixed and moveable glass components on vehicles | ●current |
| AUMGTM002 | Assemble vehicle frames and axles | ●current |
| AUMGTM003 | Install or replace mechanical units and assemblies | !not current |
| AUMGTM004 | Install and fit out components | ●current |
| AUMGTP001 | Finish and paint vehicle body and part surfaces | ●current |
| AUMGTR003 | Test, modify and repair vehicle electrical circuits and systems | ●current |
| AUMGTS001 | Prepare materials for fabrication using jigs and fixtures | ●current |
| AUMGTS004 | Fabricate parts for vehicle sub-assemblies | ●current |
| AUMGTT001 | Apply trim to vehicle components | ●current |
| AUMGTW001 | Perform basic welding, thermal cutting, heating and gouging | ●current |
| AUMGTW002 | Perform mechanical cutting | ●current |
| AUMGTY001 | Paint vehicle chassis and panels | ●current |
| AURAEA2002 | Apply environmental and sustainability best practice in an automotive workplace | !not current |
| AURAFA2001 | Use numbers in an automotive workplace | !not current |
| AURETR2006 | Carry out soldering of electrical wiring and circuits | !not current |
| MSS402001A | Apply competitive systems and practices | !not current |
| MSS402002A | Sustain process improvements | !not current |
| MSS402010A | Manage the impact of change on own work | !not current |
| MSS402040A | Apply 5S procedures | !not current |
| MSS402051A | Apply quality standards | !not current |
| MSS402080A | Undertake root cause analysis | !not current |
| TLID3036A | Lift and move load using a mobile crane | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every AUM training product on the register · Search all training products
Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.
No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.
Is AUM20213 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.