AUM20212 Certificate II in Automotive Manufacturing Production - Bus, Truck and Trailer

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for AUM20212 ended on 8 January 2014 — 12 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 10 January 2015. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

For an ASQA-registered RTO that does not already hold it, adding the replacement to scope is a change-of-scope application to ASQA, with a fee set by law: A$200 application fee + A$1,100 assessment fee per application (up to 5 VET courses and 50 units of competency). RTOs registered by a state regulator, and ASQA delegates, sit under other arrangements. Source: NVR Fees Determination 2026, F2026L00814, from 1 July 2026 · read 5 September 2026.

Product type
Qualification
Training package
AUM12 — Automotive Manufacturing
Currency period ends
8 January 2014
Latest release
Release 1 · 29 June 2012
Supersedes
AUM25108
Superseded by
AUM20213 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. AUM20212Superseded — not equivalentCertificate II in Automotive Manufacturing Production - Bus, Truck and Trailer
  2. not equivalent
  3. AUM20213Superseded — equivalentCertificate II in Automotive Manufacturing Production - Bus, Truck and Trailer
  4. equivalent
  5. AUM20218CurrentCertificate II in Automotive Manufacturing Production - Bus, Truck and Trailer

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • AUM25108AUM20212equivalent28 June 2012

    The register records this supersession but attaches no note on what changed.

  • AUM20212AUM20213not equivalent9 January 2014

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for AUM20212 and for its training package AUM12 (release 1.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is AUM20212 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AUM20212 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AUM20212 is made of

training.gov.au lists 35 units for AUM20212: 7 core and 28 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 7 listed

CodeUnitIn this product
AUMAMA2002Work effectively with others in teamsnot current
AUMASA2001Monitor and maintain a safe workplace and environmentnot current
AUMATK2002Prepare, use and operate equipment, tools and machinerynot current
AUMGTA2001Read and interpret working drawings and work ordersnot current
AUMGTM2001Assemble componentsnot current
AUMGTW3001Conduct basic welding, thermal cutting, heating and gouging operationsnot current
AUMGTW3002Conduct mechanical cutting operationsnot current

Elective units 28 listed

CodeUnitIn this product
AUMAMA2001Manage personal workplacenot current
AUMATK3003Monitor and maintain equipment, tools and machinerynot current
AUMATS2001Stamp and press partsnot current
AUMFBM2001Prepare and process materials and componentsnot current
AUMFQM2001Monitor and maintain continuous improvement of systems and processesnot current
AUMGCA2001Provide customer servicenot current
AUMGMM3001Contribute to workplace relationships and processesnot current
AUMGQA3001Inspect work and apply organisation technical quality standardsnot current
AUMGTG3001Install fixed and moveable glass componentsnot current
AUMGTM2004Install and fit out componentsnot current
AUMGTM3002Assemble frame and axlenot current
AUMGTM3003Install or replace mechanical units and assembliesnot current
AUMGTP3001Finish surfaces for paintingnot current
AUMGTR3003Perform minor modifications and repairs to electrical circuits and systemsnot current
AUMGTS3001Prepare materials for fabrication using jigs and fixturesnot current
AUMGTS3004Fabricate parts for sub-assembliesnot current
AUMGTT2001Apply trim to componentsnot current
AUMGTY3001Paint chassis or panelsnot current
AURC251677AUse numbers in the workplacenot current
AURC272003AApply environmental regulations and best practice in a workplace or businessnot current
AURE224008ACarry out soldering of electrical wiring/circuitsnot current
MSACMC210AManage the impact of change on own worknot current
MSACMS200AApply competitive manufacturing practicesnot current
MSACMS201ASustain process improvementsnot current
MSACMT240AApply 5S procedures in a manufacturing environmentnot current
MSACMT251AApply quality standardsnot current
MSACMT280AUndertake root cause analysisnot current
TLID3036ALift and move load using a mobile cranenot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 13 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AUM training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is AUM20212 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.