When must new enrolments into AUM25108 stop?

New enrolments are not permitted from 29 June 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in AUM25108?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

AUM25108 Certificate II in Automotive Manufacturing (Bus/Truck/Trailer)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

AUM25108Superseded — equivalentCertificate II in Automotive Manufacturing (Bus/Truck/Trailer)
equivalent
AUM20212Superseded — not equivalentCertificate II in Automotive Manufacturing Production - Bus, Truck and Trailer
not equivalent
AUM20213Superseded — equivalentCertificate II in Automotive Manufacturing Production - Bus, Truck and Trailer
equivalent
AUM20218CurrentCertificate II in Automotive Manufacturing Production - Bus, Truck and Trailer

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

AUM25101AUM25108equivalent31 August 2008
The register records this supersession but attaches no note on what changed.
AUM25108AUM20212equivalent28 June 2012
The register records this supersession but attaches no note on what changed.

Is AUM25108 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AUM25108 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AUM25108 is made of

training.gov.au lists 35 units for AUM25108. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 35 listed

Code	Unit	Core or elective	In this product
AUM2001B	Monitor and maintain a safe workplace and environment	`N/A`	not current
AUM2002B	Receive and dispatch materials, equipment and tools	`N/A`	not current
AUM2003B	Prepare and process materials and components	`N/A`	not current
AUM2004B	Prepare and use/operate equipment, tools and/or machinery	`N/A`	not current
AUM2005B	Monitor and maintain continuous improvement of systems and processes	`N/A`	not current
AUM2006B	Monitor and maintain equipment, tools and machinery	`N/A`	not current
AUM2007B	Manage personal workplace	`N/A`	not current
AUM2009B	Work effectively with others in teams	`N/A`	not current
AUM8001B	Contribute to workplace relationships and processes	`N/A`	not current
AUM8011B	Provide customer service	`N/A`	not current
AUM8021B	Inspect work and apply organisation technical quality standards	`N/A`	not current
AUM8031B	Receive and store parts	`N/A`	not current
AUM8033B	Select and dispatch parts	`N/A`	not current
AUM8041B	Prepare materials for fabrication using jigs/ fixtures	`N/A`	not current
AUM8043B	Read and interpret working drawings and work orders	`N/A`	not current
AUM8051B	Conduct basic welding, thermal cutting, heating and gouging operations	`N/A`	not current
AUM8052B	Conduct mechanical cutting operations	`N/A`	not current
AUM8062B	Stamp and press parts	`N/A`	not current
AUM8063B	Fabricate parts for sub-assemblies	`N/A`	not current
AUM8071B	Finish surfaces for painting	`N/A`	not current
AUM8072B	Paint chassis or panels	`N/A`	not current
AUM8081B	Apply trim to components	`N/A`	not current
AUM8082B	Assemble components	`N/A`	not current
AUM8083B	Assemble frame and axle	`N/A`	not current
AUM8086B	Service after assembly	`N/A`	not current
AUM8090B	Install fixed and moveable glass components	`N/A`	not current
AUM8091B	Install or replace mechanical units/ assemblies	`N/A`	not current
AUM8092B	Install/fit out components	`N/A`	not current
AUM8093B	Test, service and replace battery	`N/A`	not current
AUM8105B	Perform minor modifications/repairs to electrical circuits/systems	`N/A`	not current

Show the remaining 5 units

Code	Unit	Core or elective	In this product
AUM8111B	Perform forklift driving and lifting operations	`N/A`	not current
AUM8112B	Operate load shifting equipment	`N/A`	not current
AURE224008A	Carry out soldering of electrical wiring/circuits	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
TLID3607C	Lift and move load using mobile crane up to and including 20 tonnes	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AUM training product on the register · Search all training products

Is AUM25108 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.