Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
- AUM30212Superseded — equivalentCertificate III in Automotive Manufacturing Technical Operations - Bus, Truck and Trailer
- =equivalent
- AUM30213Superseded — equivalentCertificate III in Automotive Manufacturing Technical Operations - Bus, Truck and Trailer
- =equivalent
- AUM30218Superseded — equivalentCertificate III in Automotive Manufacturing Technical Operations - Bus, Truck and Trailer
- =equivalent
- AUM30226CurrentCertificate III in Automotive Manufacturing Technical Operations - Bus, Truck and Trailer
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Official documents on the register
What training.gov.au lists for AUM30212 and for its training package AUM12 (release 1.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.
Is AUM30212 on your scope?
This page is the register's record of one product. What it cannot tell you is whether AUM30212 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What AUM30212 is made of
training.gov.au lists 53 units for AUM30212: 11 core and 42 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 11 listed
| Code | Unit | In this product |
|---|---|---|
| AUMASA2001 | Monitor and maintain a safe workplace and environment | !not current |
| AUMATK2002 | Prepare, use and operate equipment, tools and machinery | !not current |
| AUMATK3003 | Monitor and maintain equipment, tools and machinery | !not current |
| AUMGLM3001 | Comply with heavy vehicle modification standards | !not current |
| AUMGMM3001 | Contribute to workplace relationships and processes | !not current |
| AUMGQA3001 | Inspect work and apply organisation technical quality standards | !not current |
| AUMGTA2001 | Read and interpret working drawings and work orders | !not current |
| AUMGTM3005 | Read and interpret engineering drawings and job specifications | !not current |
| AUMGTW3001 | Conduct basic welding, thermal cutting, heating and gouging operations | !not current |
| AUMGTW3002 | Conduct mechanical cutting operations | !not current |
| AURC270789A | Communicate effectively in the workplace | !not current |
Elective units 42 listed
| Code | Unit | In this product |
|---|---|---|
| AUMABA3002 | Operate load shifting equipment | !not current |
| AUMGCA2001 | Provide customer service | !not current |
| AUMGMA3001 | Participate in workplace productivity | !not current |
| AUMGTA3002 | Service after assembly | !not current |
| AUMGTB3001 | Assemble and install braking system kit | !not current |
| AUMGTD3001 | Perform wheel alignment operations | !not current |
| AUMGTG3001 | Install fixed and moveable glass components | !not current |
| AUMGTM2001 | Assemble components | !not current |
| AUMGTM2004 | Install and fit out components | !not current |
| AUMGTM3002 | Assemble frame and axle | !not current |
| AUMGTM3003 | Install or replace mechanical units and assemblies | !not current |
| AUMGTM3006 | Assemble and install hydraulic system kit | !not current |
| AUMGTM3007 | Assemble and install pneumatic system kit | !not current |
| AUMGTM3008 | Bond and repair components using fibreglass reinforced plastic techniques | !not current |
| AUMGTN3001 | Rectify and replace vehicle body panels and ancillary fittings | !not current |
| AUMGTP3001 | Finish surfaces for painting | !not current |
| AUMGTP3002 | Rework paint faults | !not current |
| AUMGTR3001 | Install or replace electrical and electronic units and assemblies | !not current |
| AUMGTR3002 | Manufacture or modify wiring harnesses | !not current |
| AUMGTR3003 | Perform minor modifications and repairs to electrical circuits and systems | !not current |
| AUMGTS3001 | Prepare materials for fabrication using jigs and fixtures | !not current |
| AUMGTS3002 | Prepare materials for fabrication using manual processes | !not current |
| AUMGTS3003 | Fabricate plugs | !not current |
| AUMGTS3004 | Fabricate parts for sub-assemblies | !not current |
| AUMGTT2001 | Apply trim to components | !not current |
| AUMGTW3003 | Perform manual metal arc welding operations | !not current |
| AUMGTW3004 | Perform gas tungsten arc welding operations | !not current |
| AUMGTW3005 | Perform gas metal arc welding operations | !not current |
| AUMGTW3006 | Machine parts | !not current |
| AUMGTY3001 | Paint chassis or panels | !not current |
Show the remaining 12 elective units
| Code | Unit | In this product |
|---|---|---|
| AUMGTY3002 | Mount and install assembled component to chassis or frame | !not current |
| AUMGTY3003 | Modify or rectify chassis and frame and associated components | !not current |
| AURC272003A | Apply environmental regulations and best practice in a workplace or business | !not current |
| AURT211170A | Inspect and service air braking systems | !not current |
| AURT216130A | Inspect suspension systems | !not current |
| AURT216170A | Inspect and service suspension systems | !not current |
| AURT311166A | Repair air braking systems | !not current |
| AURT411145A | Overhaul air braking systems/components | !not current |
| AURTH316166A | Repair suspension systems (heavy vehicle) | !not current |
| MSACMC210A | Manage the impact of change on own work | !not current |
| MSACMS200A | Apply competitive manufacturing practices | !not current |
| MSACMT280A | Undertake root cause analysis | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every AUM training product on the register · Search all training products
Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.
No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.
Is AUM30212 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.