Can an RTO still enrol new students in AUM35108?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 29 June 2013. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in AUM35108?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

AUM35108 Certificate III in Automotive Manufacturing (Bus/Truck/Trailer)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

AUM35108Superseded — equivalentCertificate III in Automotive Manufacturing (Bus/Truck/Trailer)
equivalent
AUM30212Superseded — equivalentCertificate III in Automotive Manufacturing Technical Operations - Bus, Truck and Trailer
equivalent
AUM30213Superseded — equivalentCertificate III in Automotive Manufacturing Technical Operations - Bus, Truck and Trailer
equivalent
AUM30218Superseded — equivalentCertificate III in Automotive Manufacturing Technical Operations - Bus, Truck and Trailer
equivalent
AUM30226CurrentCertificate III in Automotive Manufacturing Technical Operations - Bus, Truck and Trailer

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

AUM35101AUM35108equivalent31 August 2008
The register records this supersession but attaches no note on what changed.
AUM35108AUM30212equivalent28 June 2012
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for AUM35108 and for its training package AUM08 (release 1.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

AUM35108_R1.pdfAUM35108 release 1 · product document · published 23 October 2013
AUM35108_R1.docxAUM35108 release 1 · product document · published 26 November 2024

Is AUM35108 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AUM35108 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AUM35108 is made of

training.gov.au lists 66 units for AUM35108. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 66 listed

Code	Unit	Core or elective	In this product
AUM2001B	Monitor and maintain a safe workplace and environment	`N/A`	not current
AUM2002B	Receive and dispatch materials, equipment and tools	`N/A`	not current
AUM2003B	Prepare and process materials and components	`N/A`	not current
AUM2004B	Prepare and use/operate equipment, tools and/or machinery	`N/A`	not current
AUM2005B	Monitor and maintain continuous improvement of systems and processes	`N/A`	not current
AUM2006B	Monitor and maintain equipment, tools and machinery	`N/A`	not current
AUM2009B	Work effectively with others in teams	`N/A`	not current
AUM8001B	Contribute to workplace relationships and processes	`N/A`	not current
AUM8011B	Provide customer service	`N/A`	not current
AUM8021B	Inspect work and apply organisation technical quality standards	`N/A`	not current
AUM8032B	Control stock	`N/A`	not current
AUM8033B	Select and dispatch parts	`N/A`	not current
AUM8041B	Prepare materials for fabrication using jigs/ fixtures	`N/A`	not current
AUM8042B	Prepare materials for fabrication using manual processes	`N/A`	not current
AUM8043B	Read and interpret working drawings and work orders	`N/A`	not current
AUM8044B	Read and interpret engineering drawings and job specifications	`N/A`	not current
AUM8051B	Conduct basic welding, thermal cutting, heating and gouging operations	`N/A`	not current
AUM8052B	Conduct mechanical cutting operations	`N/A`	not current
AUM8053B	Perform manual metal arc welding operations (MMAW)	`N/A`	not current
AUM8054B	Perform submerged arc welding operations (SAW)	`N/A`	not current
AUM8055B	Perform oxy acetylene welding operations (OAW)	`N/A`	not current
AUM8056B	Perform gas tungsten are welding operations (GTAW)	`N/A`	not current
AUM8057B	Perform gas metal arc welding operations (GMAW)	`N/A`	not current
AUM8061B	Fabricate plugs	`N/A`	not current
AUM8062B	Stamp and press parts	`N/A`	not current
AUM8063B	Fabricate parts for sub-assemblies	`N/A`	not current
AUM8064B	Machine parts	`N/A`	not current
AUM8071B	Finish surfaces for painting	`N/A`	not current
AUM8072B	Paint chassis or panels	`N/A`	not current
AUM8073B	Control oven baking cycle	`N/A`	not current

Show the remaining 36 units

Code	Unit	Core or elective	In this product
AUM8074B	Rework paint faults	`N/A`	not current
AUM8081B	Apply trim to components	`N/A`	not current
AUM8082B	Assemble components	`N/A`	not current
AUM8083B	Assemble frame and axle	`N/A`	not current
AUM8084B	Install engine and drive train	`N/A`	not current
AUM8085B	Mount and install assembled component to chassis or frame	`N/A`	not current
AUM8086B	Service after assembly	`N/A`	not current
AUM8087B	Assemble and install hydraulic system kit	`N/A`	not current
AUM8088B	Assemble and install pneumatic system kit	`N/A`	not current
AUM8089B	Assemble and install braking system kit	`N/A`	not current
AUM8090B	Install fixed and moveable glass components	`N/A`	not current
AUM8091B	Install or replace mechanical units/ assemblies	`N/A`	not current
AUM8092B	Install/fit out components	`N/A`	not current
AUM8093B	Test, service and replace battery	`N/A`	not current
AUM8094B	Install or replace electrical/electronic units/assemblies	`N/A`	not current
AUM8095B	Perform wheel alignment operations	`N/A`	not current
AUM8101B	Modify or rectify chassis/frame and associated components	`N/A`	not current
AUM8102B	Manufacture or modify wiring harnesses	`N/A`	not current
AUM8103B	Rectify/replace vehicle body panels and ancillary fittings	`N/A`	not current
AUM8104B	Bond/repair components using fibreglass reinforced plastic techniques	`N/A`	not current
AUM8105B	Perform minor modifications/repairs to electrical circuits/systems	`N/A`	not current
AUM8111B	Perform forklift driving and lifting operations	`N/A`	not current
AUM8112B	Operate load shifting equipment	`N/A`	not current
AUM8121B	Conduct final inspections and functional tests	`N/A`	not current
AUM8131B	Install and commission air conditioning system kit	`N/A`	not current
AUM8132B	Install and commission refrigeration system kit	`N/A`	not current
AUM8133B	Remove and replace air conditioning system	`N/A`	not current
AUM8134B	Remove and replace refrigeration system	`N/A`	not current
AURE224008A	Carry out soldering of electrical wiring/circuits	`N/A`	not current
AURT211170A	Inspect and service air braking systems	`N/A`	not current
AURT216130A	Inspect suspension systems	`N/A`	not current
AURT216170A	Inspect and service suspension systems	`N/A`	not current
AURT311166A	Repair air braking systems	`N/A`	not current
AURT411145A	Overhaul air braking systems/components	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
TLID3607C	Lift and move load using mobile crane up to and including 20 tonnes	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AUM training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is AUM35108 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.