When must new enrolments into AUR20811 stop?

New enrolments are not permitted from 17 January 2014 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in AUR20811?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

AUR20811 Certificate II in Outdoor Power Equipment

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

AUR20811Superseded — not equivalentCertificate II in Outdoor Power Equipment
not equivalent
AUR20812Superseded — equivalentCertificate II in Outdoor Power Equipment Technology
equivalent
AUR20816Superseded — equivalentCertificate II in Outdoor Power Equipment Technology
equivalent
AUR20820CurrentCertificate II in Outdoor Power Equipment Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

AUR20805AUR20811equivalent20 June 2011
The register records this supersession but attaches no note on what changed.
AUR20811AUR20812not equivalent16 January 2013
The register records this supersession but attaches no note on what changed.

Is AUR20811 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AUR20811 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AUR20811 is made of

training.gov.au lists 138 units for AUR20811. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 138 listed

Code	Unit	Core or elective	In this product
AURC252103A	Apply basic automotive troubleshooting processes	`N/A`	not current
AURC270103A	Apply safe working practices	`N/A`	not current
AURC270688A	Work effectively with others	`N/A`	not current
AURC270789A	Communicate effectively in the workplace	`N/A`	not current
AURC270889A	Communicate business information	`N/A`	not current
AURC272003A	Apply environmental regulations and best practice in a workplace or business	`N/A`	not current
AURC359554A	Provide technical guidance	`N/A`	not current
AURC361101A	Adapt work processes to new technologies	`N/A`	not current
AURC361230A	Inspect technical quality of work	`N/A`	not current
AURC361337A	Maintain quality systems	`N/A`	not current
AURC365722A	Estimate complex jobs	`N/A`	not current
AURE218664A	Remove and replace electrical/electronic units/assemblies	`N/A`	not current
AURE218670A	Service, maintain or replace batteries	`N/A`	not current
AURE218676A	Test, service and charge batteries	`N/A`	not current
AURE218708A	Carry out repairs to single electrical circuits	`N/A`	not current
AURE219331A	Install, test and repair low voltage wiring/lighting systems	`N/A`	not current
AURE219431A	Install, test and repair electrical security systems/components	`N/A`	not current
AURE219531A	Install ancillary electrical components	`N/A`	not current
AURE220140A	Manufacture and repair wiring harness/looms	`N/A`	not current
AURE222976B	Test and service outdoor electric powered equipment	`N/A`	not current
AURE224008A	Carry out soldering of electrical wiring/circuits	`N/A`	not current
AURE311666A	Repair electric braking systems	`N/A`	not current
AURE318866A	Repair electrical systems	`N/A`	not current
AURE318966A	Repair instruments and warning systems	`N/A`	not current
AURE319145A	Overhaul charging system alternators	`N/A`	not current
AURE319166B	Repair charging systems	`N/A`	not current
AURE319245A	Overhaul starting motors	`N/A`	not current
AURE319266B	Repair starting systems	`N/A`	not current
AURE320666B	Repair ignition systems	`N/A`	not current
AURE321066A	Repair electronic systems	`N/A`	not current

Show the remaining 108 units

Code	Unit	Core or elective	In this product
AURE321171A	Service and repair electronic spark ignition engine management systems	`N/A`	not current
AURP201570B	Service engines and engine components (outdoor power equipment)	`N/A`	not current
AURP245171B	Service and repair rotary cutting systems	`N/A`	not current
AURP245271B	Service and repair drum cutting systems	`N/A`	not current
AURP245371B	Service and repair chainsaw cutting systems	`N/A`	not current
AURP245465B	Service line trimming systems and components	`N/A`	not current
AURP245571B	Service and repair post-boring systems	`N/A`	not current
AURP245671B	Service and repair post-hole digging systems	`N/A`	not current
AURP245771B	Service and repair reciprocating cutting systems	`N/A`	not current
AURP247670B	Service pumping systems	`N/A`	not current
AURP301566B	Repair engines and engine components (outdoor power equipment)	`N/A`	not current
AURP322776B	Test and service 240V portable generators	`N/A`	not current
AURP347666B	Repair pumping systems	`N/A`	not current
AURT200108A	Carry out servicing operations	`N/A`	not current
AURT200368A	Select and use bearings, seals, gaskets, sealants and adhesives	`N/A`	not current
AURT201164A	Remove and install engine assemblies	`N/A`	not current
AURT201170A	Inspect and service engines	`N/A`	not current
AURT202166B	Repair cooling systems	`N/A`	not current
AURT202170B	Inspect and service cooling systems	`N/A`	not current
AURT202608A	Carry out radiator repairs	`N/A`	not current
AURT203170B	Service petrol fuel systems	`N/A`	not current
AURT203670B	Service diesel fuel injection systems	`N/A`	not current
AURT204670A	Inspect and service emission control systems	`N/A`	not current
AURT205166A	Repair exhaust system components	`N/A`	not current
AURT206670A	Inspect and service transmissions (manual)	`N/A`	not current
AURT207170A	Inspect and service transmissions (automatic)	`N/A`	not current
AURT208170A	Service transmissions (hydrostatic)	`N/A`	not current
AURT209170A	Service hydraulic systems	`N/A`	not current
AURT210170A	Inspect and service braking systems	`N/A`	not current
AURT210736A	Machine brake drums and brake disc rotors	`N/A`	not current
AURT212670A	Service final drive assemblies	`N/A`	not current
AURT213165A	Remove and refit driveline components	`N/A`	not current
AURT213170A	Service final drive (driveline)	`N/A`	not current
AURT215130A	Inspect steering systems	`N/A`	not current
AURT215170A	Inspect and service steering systems	`N/A`	not current
AURT216130A	Inspect suspension systems	`N/A`	not current
AURT216170A	Inspect and service suspension systems	`N/A`	not current
AURT217606A	Balance wheels and tyres	`N/A`	not current
AURT217665A	Remove, fit and inspect wheel assemblies	`N/A`	not current
AURT217766A	Remove, inspect, repair and fit tyres and tubes (light)	`N/A`	not current
AURT217865A	Remove and refit wheel hubs and associated brake components	`N/A`	not current
AURT225156A	Read and interpret engineering drawings	`N/A`	not current
AURT225667A	Use and maintain measuring equipment	`N/A`	not current
AURT226008A	Carry out pre-repair operations (mechanical)	`N/A`	not current
AURT270278A	Use and maintain workplace tools and equipment	`N/A`	not current
AURT303166B	Repair petrol fuel systems	`N/A`	not current
AURT303666A	Repair diesel fuel systems	`N/A`	not current
AURT304666A	Repair and replace emission control systems	`N/A`	not current
AURT305671A	Inspect and repair engine forced induction systems	`N/A`	not current
AURT306170A	Inspect, service and/or repair clutch assemblies and associated operating system components	`N/A`	not current
AURT308166A	Repair transmissions (hydrostatic)	`N/A`	not current
AURT309166A	Repair hydraulic systems	`N/A`	not current
AURT310104A	Assemble and fit braking systems/components	`N/A`	not current
AURT310166A	Repair hydraulic braking systems	`N/A`	not current
AURT310171A	Inspect, service and repair auxiliary braking systems	`N/A`	not current
AURT316271A	Inspect, service and repair tracked type drive and support systems	`N/A`	not current
AURT334972A	Set, operate and monitor specialist machines	`N/A`	not current
AURT335108A	Carry out machining operations	`N/A`	not current
AURT365130A	Inspect vehicle systems and determine preferred repair action	`N/A`	not current
AURT366108A	Carry out diagnostic procedures	`N/A`	not current
AURT366308A	Carry out advanced diagnostic procedures	`N/A`	not current
AURTL301166A	Repair engines and associated engine components (light vehicle)	`N/A`	not current
AURTL306666A	Repair transmissions - manual (light vehicle)	`N/A`	not current
AURTL307166A	Repair transmissions - automatic (light vehicle)	`N/A`	not current
AURTL312666A	Repair final drive assemblies (light vehicle)	`N/A`	not current
AURTL313166A	Repair final drive - driveline (light vehicle)	`N/A`	not current
AURTL315166A	Repair steering systems (light vehicle)	`N/A`	not current
AURTL316166A	Repair suspension systems (light vehicle)	`N/A`	not current
AURTM315166A	Repair steering systems (motorcycle)	`N/A`	not current
AURTTE3001	Apply knowledge of engine science	`N/A`	not current
AURTTM3001	Operate and monitor computer numerical control machines	`N/A`	not current
AURTTM3002	Repair bearing tunnels and connecting rods in engines	`N/A`	not current
AURTTM3003	Apply metal to rebuild engine components	`N/A`	not current
AURTTM3004	Assemble engine blocks and sub-assemblies	`N/A`	not current
AURTTM3005	Balance rotating and reciprocating engine components	`N/A`	not current
AURTTM3006	Perform advanced machining and blueprinting of engine components	`N/A`	not current
AURTTM3007	Carry out grinding operations	`N/A`	not current
AURTTM3008	Dismantle and evaluate engine blocks and sub-assemblies	`N/A`	not current
AURTTM3009	Fit sleeves and bore and hone engine cylinders	`N/A`	not current
AURTTM3010	Heat treat, straighten and reclaim engine components	`N/A`	not current
AURTTM3011	Recondition engine cylinder heads	`N/A`	not current
AURV223608A	Carry out oxy acetylene welding, thermal cutting and thermal heating procedures	`N/A`	not current
AURV223808A	Carry out soft soldering techniques	`N/A`	not current
AURV281108A	Carry out manual metal arc welding procedures	`N/A`	not current
AURV281208A	Carry out brazing procedures	`N/A`	not current
AURV281308A	Carry out gas metal arc (MIG) welding procedures	`N/A`	not current
AURV281408A	Carry out gas tungsten arc (TIG) welding procedures	`N/A`	not current
AURV281508A	Carry out spot welding procedures	`N/A`	not current
AURV323908A	Carry out thermoplastic welding procedures	`N/A`	not current
BSBCMN311B	Maintain workplace safety	`N/A`	not current
BSBINN301A	Promote innovation in a team environment	`N/A`	not current
HLTFA301B	Apply first aid	`N/A`	not current
MEM05003B	Perform soft soldering	`N/A`	not current
MEM05004C	Perform routine oxy acetylene welding	`N/A`	not current
MEM05007C	Perform manual heating and thermal cutting	`N/A`	not current
MEM05017D	Weld using gas metal arc welding process	`N/A`	not current
MEM05050B	Perform routine gas metal arc welding	`N/A`	not current
MEM05051A	Select welding processes	`N/A`	not current
MEM05052A	Apply safe welding practices	`N/A`	not current
MEM07005C	Perform general machining	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM12023A	Perform engineering measurements	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18002B	Use power tools/hand held operations	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
TLID1001A	Shift materials safely using manual handling methods	`N/A`	not current
TLID2004A	Load and unload goods/cargo	`N/A`	not current
TLID2013A	Move materials mechanically using automated equipment	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AUR training product on the register · Search all training products

Is AUR20811 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.