Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is AUR31812 on your scope?
This page is the register's record of one product. What it cannot tell you is whether AUR31812 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What AUR31812 is made of
training.gov.au lists 37 units for AUR31812: 12 core and 25 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 12 listed
| Code | Unit | In this product |
|---|---|---|
| AURAEA3003 | Monitor environmental and sustainability best practice in the automotive mechanical industry | !not current |
| AURASA2002 | Apply safe working practices in an automotive workplace | !not current |
| AURETR2009 | Install, test and repair vehicle lighting and wiring systems | !not current |
| AURETR2012 | Test and repair basic electrical circuits | !not current |
| AURETR3022 | Diagnose and repair vehicle dynamic control systems | !not current |
| AURHTB3001 | Repair air braking systems | !not current |
| AURHTD3003 | Repair suspension systems (heavy vehicle) | !not current |
| AURHTJ2003 | Remove, inspect, and refit heavy vehicle wheel assemblies | !not current |
| AURHTY3002 | Diagnose and repair mechanical connections of heavy vehicles and trailers over 4.5 tonnes | !not current |
| AURTTA2006 | Service hydraulic systems | !not current |
| AURTTA3018 | Carry out diagnostic procedures | !not current |
| AURTTK2002 | Use and maintain workplace tools and equipment | !not current |
Elective units 25 listed
| Code | Unit | In this product |
|---|---|---|
| AURACA2001 | Establish relations with customers | !not current |
| AURAFA2003 | Communicate effectively in an automotive workplace | !not current |
| AURATA2002 | Read and interpret engineering drawings | !not current |
| AURETR2010 | Fabricate, test and repair wiring harnesses and looms | !not current |
| AURETR2011 | Install and test basic ancillary electrical components | !not current |
| AURHTB3002 | Diagnose and repair heavy vehicle hydraulic braking systems | !not current |
| AURHTB3007 | Diagnose and repair heavy vehicle electronic braking systems | !not current |
| AURHTJ2002 | Select heavy vehicle tyres and rims for specific applications | !not current |
| AURHTJ2006 | Remove, inspect, repair and fit tyres and tubes (heavy) | !not current |
| AURHTR3005 | Diagnose and repair heavy trailer electronically controlled roll stability systems | !not current |
| AURHTY2001 | Inspect and service mechanical connections of heavy vehicles and trailers over 4.5 tonnes | !not current |
| AURTTA2004 | Carry out servicing operations | !not current |
| AURTTA3011 | Install hydraulic systems to specified applications | !not current |
| AURTTA3012 | Manufacture and install fluid power hose assemblies | !not current |
| AURTTA3013 | Repair hydraulic systems | !not current |
| AURTTA3014 | Assemble and install pneumatic systems and components | !not current |
| AURTTB2001 | Inspect and service braking systems | !not current |
| AURTTB2004 | Inspect and service air braking systems | !not current |
| AURTTB3005 | Assemble and fit braking systems and components | !not current |
| AURTTB3006 | Inspect, service and repair auxiliary braking systems | !not current |
| AURTTD2004 | Inspect and service suspension systems | !not current |
| AURTTJ2001 | Balance wheels and tyres | !not current |
| AURVTW2001 | Carry out manual metal arc welding procedures | !not current |
| AURVTW2003 | Carry out gas metal arc welding procedures | !not current |
| AURVTW2008 | Carry out oxy acetylene welding, thermal cutting and thermal heating procedures | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every AUR training product on the register · Search all training products
Is AUR31812 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.