BSB30712 Certificate III in Work Health and Safety

Supersededtraining.gov.au: supersededEquivalent

The currency period for BSB30712 ended on 23 March 2015 — 11 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 25 March 2016 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
BSB07 — Business Services Training Package
Currency period ends
23 March 2015
Latest release
Release 1 · 18 December 2012
Supersedes
BSB30707
Superseded by
BSB30715 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. BSB30712Superseded — equivalentCertificate III in Work Health and Safety
  2. equivalent
  3. BSB30715Superseded — not equivalentCertificate III in Work Health and Safety
  4. not equivalent
  5. BSB30719CurrentCertificate III in Work Health and Safety

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • BSB30707BSB30712equivalent17 December 2012

    Total number of units reduced from 12 to 10, number of core units reduced from 7 to 5 - EQUIVALENT.

  • BSB30712BSB30715equivalent24 March 2015

    Updated to meet Standards for Training Packages.

Is BSB30712 on your scope?

This page is the register's record of one product. What it cannot tell you is whether BSB30712 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What BSB30712 is made of

training.gov.au lists 19 units for BSB30712: 5 core and 14 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 5 listed

CodeUnitIn this product
BSBWHS302AApply knowledge of WHS legislation in the workplacenot current
BSBWHS303AParticipate in WHS hazard identification, risk assessment and risk controlnot current
BSBWHS304AParticipate effectively in WHS communication and consultation processesnot current
BSBWHS305AContribute to WHS issue resolutionnot current
PUAWER001BIdentify, prevent and report potential workplace emergency situationsnot current

Elective units 14 listed

CodeUnitIn this product
BSBCMM201ACommunicate in the workplacenot current
BSBDIV301AWork effectively with diversitynot current
BSBFLM303CContribute to effective workplace relationshipsnot current
BSBINM301AOrganise workplace informationnot current
BSBINN201AContribute to workplace innovationnot current
BSBSUS301AImplement and monitor environmentally sustainable work practicesnot current
BSBWHS406AAssist with responding to incidentsnot current
BSBWOR301BOrganise personal work priorities and developmentnot current
BSBWOR401AEstablish effective workplace relationshipsnot current
BSBWRT301AWrite simple documentsnot current
CPPWMT3044AIdentify wastes and hazardsnot current
HLTFA302CProvide first aid in remote situationnot current
HLTFA311AApply first aidnot current
PUAWER004BRespond to workplace emergenciesnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every BSB training product on the register · Search all training products

Is BSB30712 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.