When must new enrolments into CPC20811 stop?

New enrolments are not permitted from 7 February 2014 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in CPC20811?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CPC20811 Certificate II in Metal Roofing and Cladding

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CPC20811Superseded — not equivalentCertificate II in Metal Roofing and Cladding
not equivalent
CPC20812Deleted from the registerCertificate II in Metal Roofing and Cladding

The register does not list a current endpoint for this chain: CPC20812 is the last product it points at, and CPC20812 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

CPC20808CPC20811not equivalent20 May 2011
The register records this supersession but attaches no note on what changed.
CPC20811CPC20812not equivalent6 February 2013
Revised qualification deemed not equivalent to CPC20811 Change to core units: • CPCPCM2023A revised and not equivalent to CPCPCM2043A • native CPC08 first aid unit (CPCPCM2011A) replaced with imported HLT07 unit (HLTFA211A) Core and elective units revised resulting in a number of unit identifier changes

Is CPC20811 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPC20811 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPC20811 is made of

training.gov.au lists 31 units for CPC20811. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 31 listed

Code	Unit	Core or elective	In this product
CPCCCM2008A	Erect and dismantle restricted height scaffolding	`N/A`	not current
CPCCCM2010A	Work safely at heights	`N/A`	not current
CPCCCM3001B	Operate elevated work platforms	`N/A`	not current
CPCCPB3015A	Install acoustic and thermal environmental protection systems	`N/A`	not current
CPCCST2005A	Carry out load slinging of off-site materials	`N/A`	not current
CPCPCM2002A	Carry out interactive workplace communication	`N/A`	not current
CPCPCM2004A	Read plans and calculate plumbing quantities	`N/A`	not current
CPCPCM2011A	Apply first aid in the workplace	`N/A`	not current
CPCPCM2021A	Work effectively in the plumbing and services sector	`N/A`	not current
CPCPCM2023A	Carry out OHS requirements	`N/A`	not current
CPCPCM2025A	Handle and store plumbing materials	`N/A`	not current
CPCPCM2026A	Use plumbing hand and power tools	`N/A`	not current
CPCPCM2027A	Carry out levelling	`N/A`	not current
CPCPCM2028A	Cut and join sheet metal	`N/A`	not current
CPCPCM2030A	Mark out materials	`N/A`	not current
CPCPCM2033A	Weld using arc welding equipment	`N/A`	not current
CPCPCM2035A	Work safely on roofs	`N/A`	not current
CPCPCM3011A	Flash penetrations through roofs and walls	`N/A`	not current
CPCPCM3012A	Weld plastic pipe using fusion method	`N/A`	not current
CPCPDR2011A	Locate and clear blockages	`N/A`	not current
CPCPRF2012A	Select and install roof sheeting and wall cladding	`N/A`	not current
CPCPRF2013A	Collect and store roof water	`N/A`	not current
CPCPRF2014A	Fabricate roof coverings for curved structures	`N/A`	not current
CPCPRF3011A	Receive roofing materials	`N/A`	not current
CPCPRF3012A	Fabricate and install roof drainage components	`N/A`	not current
CPCPRF3013A	Fabricate and install external flashings	`N/A`	not current
CPCPRF3014A	Install roof components	`N/A`	not current
CPCPRF3015A	Install roof coverings to curved roof structures	`N/A`	not current
CPCPRF3016A	Install composite roof systems	`N/A`	not current
MEM05049B	Perform routine gas tungsten arc welding	`N/A`	not current

Show the remaining 1 unit

Code	Unit	Core or elective	In this product
MEM05050B	Perform routine gas metal arc welding	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Is CPC20811 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.