CPC20812 Certificate II in Metal Roofing and Cladding

deletedthe status token training.gov.au records

Item 14

The two years of s 14(1)(b), counted from the date this product was removed from the National Register, ended before the instrument commenced on 1 July 2025 — so no completion date is shown here: the instrument imposes nothing before that day.

For an RTO registered by ASQA, nobody may be allowed to commence training and assessment in CPC20812 today. training.gov.au lists it as Deleted, and s 14(2) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025) requires the organisation to ensure it does not allow individuals to commence training and assessment in a training product that has expired, been removed or deleted from the National Register. s 14(2) carries no transition period of its own and no date to compute, and the “unless otherwise approved by the National VET Regulator” opening sits in s 14(1) only. It governs starts, not learners already enrolled: s 14(2) sets no date of its own for them — their completion period under s 14(1)(b)/(c) is stated separately on this page. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for CPC20812, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Qualification
Training package
CPC08 — Construction, Plumbing and Services Training Package
Currency period ends
14 February 2021
Latest release
Release 2 · 7 August 2019 · 2 releases in all
Supersedes
CPC20811
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from CPC20812. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • CPC20811CPC20812not equivalent6 February 2013

    Revised qualification deemed not equivalent to CPC20811 Change to core units: • CPCPCM2023A revised and not equivalent to CPCPCM2043A • native CPC08 first aid unit (CPCPCM2011A) replaced with imported HLT07 unit (HLTFA211A) Core and elective units revised resulting in a number of unit identifier changes

Official documents on the register

What training.gov.au lists for CPC20812 and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • CPC20812_R2.pdfCPC20812 release 2 · product document · published 4 October 2019
  • CPC20812_R2.docxCPC20812 release 2 · product document · published 26 November 2024

Is CPC20812 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPC20812 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPC20812 is made of

training.gov.au lists 35 units for CPC20812: 15 core and 20 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 15 listed

CodeUnitIn this product
CPCCCM2010BWork safely at heightsnot current
CPCCCM3001COperate elevated work platformsnot current
CPCPCM2039ACarry out interactive workplace communicationnot current
CPCPCM2040ARead plans and calculate plumbing quantitiesnot current
CPCPCM2041AWork effectively in the plumbing and services sectornot current
CPCPCM2043ACarry out WHS requirementsnot current
CPCPCM2045AHandle and store plumbing materialsnot current
CPCPCM2046AUse plumbing hand and power toolsnot current
CPCPCM2047ACarry out levellingnot current
CPCPCM2048ACut and join sheet metalnot current
CPCPCM2050AMark out materialsnot current
CPCPCM2055AWork safely on roofsnot current
CPCPCM3021AFlash penetrations through roofs and wallsnot current
CPCPRF2022ASelect and install roof sheeting and wall claddingnot current
HLTFA211AProvide basic emergency life supportnot current

Elective units 20 listed

CodeUnitIn this product
CPCCCM2008BErect and dismantle restricted height scaffoldingnot current
CPCCPB3015AInstall acoustic and thermal environmental protection systemsnot current
CPCCST2005ACarry out load slinging of off-site materialsnot current
CPCCWHS2001Apply WHS requirements, policies and procedures in the construction industrycurrent
CPCPCM2049ACut using oxy-LPG-acetylene equipmentnot current
CPCPCM2052AWeld using oxy-acetylene equipmentnot current
CPCPCM2053AWeld using manual metal arc welding equipmentnot current
CPCPCM3022AWeld polyethylene and polypropylene pipes using fusion methodnot current
CPCPDR2021ALocate and clear blockagesnot current
CPCPRF2023ACollect and store roof waternot current
CPCPRF2024AFabricate roof coverings for curved structuresnot current
CPCPRF3021AReceive roofing materialsnot current
CPCPRF3022AFabricate and install roof drainage componentsnot current
CPCPRF3023AFabricate and install external flashingsnot current
CPCPRF3024AInstall roof componentsnot current
CPCPRF3025AInstall roof coverings to curved roof structuresnot current
CPCPRF3026AInstall composite roof systemsnot current
CPPFES2006APrepare for installation and servicing operationsnot current
MEM05049BPerform routine gas tungsten arc weldingnot current
MEM05050BPerform routine gas metal arc weldingnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Take this with you — one email with how the register lists CPC20812 today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPC20812 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.