Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
CPC32611CPC32612≠not equivalent6 February 2013
Revised qualification deemed not equivalent to CPC32611 Change to core units: • CPCPCM2011A replaced with imported unit HLTFA211A • CPCPCM2023A revised and not equivalent to CPCPCM2043A Core and elective units revised resulting in a number of unit identifier changes
CPC32612CPC32620=equivalent26 November 2020
The register records this supersession but attaches no note on what changed.
Is CPC32612 on your scope?
This page is the register's record of one product. What it cannot tell you is whether CPC32612 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What CPC32612 is made of
training.gov.au lists 42 units for CPC32612: 22 core and 20 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 22 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCCM2008B | Erect and dismantle restricted height scaffolding | !not current |
| CPCCCM2010B | Work safely at heights | !not current |
| CPCCCM3001C | Operate elevated work platforms | !not current |
| CPCPCM2039A | Carry out interactive workplace communication | !not current |
| CPCPCM2040A | Read plans and calculate plumbing quantities | !not current |
| CPCPCM2041A | Work effectively in the plumbing and services sector | !not current |
| CPCPCM2043A | Carry out WHS requirements | !not current |
| CPCPCM2045A | Handle and store plumbing materials | !not current |
| CPCPCM2046A | Use plumbing hand and power tools | !not current |
| CPCPCM2047A | Carry out levelling | !not current |
| CPCPCM2048A | Cut and join sheet metal | !not current |
| CPCPCM2050A | Mark out materials | !not current |
| CPCPCM2055A | Work safely on roofs | !not current |
| CPCPCM3021A | Flash penetrations through roofs and walls | !not current |
| CPCPRF2022A | Select and install roof sheeting and wall cladding | !not current |
| CPCPRF3021A | Receive roofing materials | !not current |
| CPCPRF3022A | Fabricate and install roof drainage components | !not current |
| CPCPRF3023A | Fabricate and install external flashings | !not current |
| CPCPRF3024A | Install roof components | !not current |
| CPCPRF3025A | Install roof coverings to curved roof structures | !not current |
| CPCPRF3026A | Install composite roof systems | !not current |
| HLTFA211A | Provide basic emergency life support | !not current |
Elective units 20 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCPB3015A | Install acoustic and thermal environmental protection systems | !not current |
| CPCCRI3001A | Operate personnel and materials hoists | !not current |
| CPCCST2005A | Carry out load slinging of off-site materials | !not current |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry | ●current |
| CPCPCM2049A | Cut using oxy-LPG-acetylene equipment | !not current |
| CPCPCM2052A | Weld using oxy-acetylene equipment | !not current |
| CPCPCM2053A | Weld using manual metal arc welding equipment | !not current |
| CPCPCM2054A | Carry out simple concreting and rendering | !not current |
| CPCPCM3022A | Weld polyethylene and polypropylene pipes using fusion method | !not current |
| CPCPCM3023A | Fabricate and install non-ferrous pressure piping | !not current |
| CPCPDR2021A | Locate and clear blockages | !not current |
| CPCPDR2024A | Install stormwater and sub-soil drainage systems | !not current |
| CPCPDR2025A | Drain work site | !not current |
| CPCPDR2026A | Install prefabricated inspection openings and enclosures | !not current |
| CPCPMS3032A | Select and fit insulation and sheathing | !not current |
| CPCPRF2023A | Collect and store roof water | !not current |
| CPCPRF2024A | Fabricate roof coverings for curved structures | !not current |
| MEM05049B | Perform routine gas tungsten arc welding | !not current |
| MEM05050B | Perform routine gas metal arc welding | !not current |
| RIICCM210D | Install trench support | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every CPC training product on the register · Search all training products
Is CPC32612 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.