When must new enrolments into CPC32711 stop?

New enrolments are not permitted from 7 February 2014 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in CPC32711?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CPC32711 Certificate III in Gas Fitting

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CPC32711Superseded — not equivalentCertificate III in Gas Fitting
not equivalent
CPC32712Superseded — not equivalentCertificate III in Gas Fitting
not equivalent
CPC32713Superseded — equivalentCertificate III in Gas Fitting
equivalent
CPC32720CurrentCertificate III in Gas Fitting

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

CPC32708CPC32711not equivalent20 May 2011
The register records this supersession but attaches no note on what changed.
CPC32711CPC32712not equivalent6 February 2013
Revised qualification deemed not equivalent to CPC32711 Change to core units: • CPCPCM2011A replaced with imported unit HLTFA211A • CPCPCM2023A revised and not equivalent to CPCPCM2043A • CPCPGS3016A revised to become CPCPGS3046A • new unit CPCPGS3047A added • CPCPGS3017A deleted Qualification packaging remains the same as previous version Core and elective units revised resulting in a number of unit identifier changes

Is CPC32711 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPC32711 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPC32711 is made of

training.gov.au lists 45 units for CPC32711. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 45 listed

Code	Unit	Core or elective	In this product
CPCCCM2008A	Erect and dismantle restricted height scaffolding	`N/A`	not current
CPCCCM2010A	Work safely at heights	`N/A`	not current
CPCCCM3001B	Operate elevated work platforms	`N/A`	not current
CPCCRI3001A	Operate personnel and materials hoists	`N/A`	not current
CPCCST2005A	Carry out load slinging of off-site materials	`N/A`	not current
CPCPCM2002A	Carry out interactive workplace communication	`N/A`	not current
CPCPCM2004A	Read plans and calculate plumbing quantities	`N/A`	not current
CPCPCM2011A	Apply first aid in the workplace	`N/A`	not current
CPCPCM2021A	Work effectively in the plumbing and services sector	`N/A`	not current
CPCPCM2023A	Carry out OHS requirements	`N/A`	not current
CPCPCM2025A	Handle and store plumbing materials	`N/A`	not current
CPCPCM2026A	Use plumbing hand and power tools	`N/A`	not current
CPCPCM2027A	Carry out levelling	`N/A`	not current
CPCPCM2028A	Cut and join sheet metal	`N/A`	not current
CPCPCM2029A	Cut using oxy-LPG-acetylene equipment	`N/A`	not current
CPCPCM2030A	Mark out materials	`N/A`	not current
CPCPCM2032A	Weld using oxy-acetylene equipment	`N/A`	not current
CPCPCM2033A	Weld using arc welding equipment	`N/A`	not current
CPCPCM2034A	Carry out simple concreting and rendering	`N/A`	not current
CPCPCM2035A	Work safely on roofs	`N/A`	not current
CPCPCM3011A	Flash penetrations through roofs and walls	`N/A`	not current
CPCPCM3012A	Weld plastic pipe using fusion method	`N/A`	not current
CPCPCM3013A	Fabricate and install non-ferrous pressure piping	`N/A`	not current
CPCPGS3016A	Install LPG systems in caravans, mobile homes, water craft and mobile workplaces	`N/A`	not current
CPCPGS3017A	Install gas detection devices	`N/A`	not current
CPCPGS3018A	Install gas pressure control equipment	`N/A`	not current
CPCPGS3019A	Install Type A gas appliance flues	`N/A`	not current
CPCPGS3020A	Install Type B gas appliance flues	`N/A`	not current
CPCPGS3021A	Purge consumer piping	`N/A`	not current
CPCPGS3022A	Maintain Type A gas appliances	`N/A`	not current

Show the remaining 15 units

Code	Unit	Core or elective	In this product
CPCPGS3023A	Disconnect and reconnect Type A gas appliances	`N/A`	not current
CPCPGS3024A	Calculate and install natural ventilation for Type A gas appliances	`N/A`	not current
CPCPGS3025A	Install subsidiary gas meters	`N/A`	not current
CPCPGS3031A	Install gas piping systems	`N/A`	not current
CPCPGS3032A	Size consumer gas piping systems	`N/A`	not current
CPCPGS3033A	Install and Commission Type A gas appliances	`N/A`	not current
CPCPGS3034A	Install LPG storage of aggregate storage capacity up to 500 litres	`N/A`	not current
CPCPGS3035A	Install LPG storage of aggregate storage capacty exceeding 500 litres and less than 8KL	`N/A`	not current
CPCPMS2011A	Assemble mechanical services components	`N/A`	not current
CPCPMS3011A	Fabricate and install steel pressure piping	`N/A`	not current
CPCPMS3013A	Install small bore heating systems	`N/A`	not current
CPCPMS3015A	Install and test ducting systems	`N/A`	not current
MEM05049B	Perform routine gas tungsten arc welding	`N/A`	not current
MEM05050B	Perform routine gas metal arc welding	`N/A`	not current
RIICCM210A	Install trench support	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Is CPC32711 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.