CPCCBC4001A Apply building codes and standards to the construction process for low rise building projects

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for CPCCBC4001A ended on 25 November 2020 — 5 years ago. It names 2 replacements below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 27 November 2021. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

For an ASQA-registered RTO that does not already hold it, adding the replacement to scope is a change-of-scope application to ASQA, with a fee set by law: A$200 application fee + A$1,100 assessment fee per application (up to 5 VET courses and 50 units of competency). RTOs registered by a state regulator, and ASQA delegates, sit under other arrangements. Source: NVR Fees Determination 2026, F2026L00814, from 1 July 2026 · read 5 September 2026.

Product type
Unit of competency
Training package
CPC08 — Construction, Plumbing and Services Training Package
Currency period ends
25 November 2020
Latest release
Release 1 · 19 May 2011
Supersedes
nothing — no earlier product listed
Superseded by
CPCCBC4001 not equivalent CPCCBC4053 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. CPCCBC4001ASuperseded — not equivalentApply building codes and standards to the construction process for low rise building projects
  2. not equivalent
  3. CPCCBC4001CurrentApply building codes and standards to the construction process for Class 1 and 10 buildings

training.gov.au publishes 2 replacements for CPCCBC4001A. This rail follows CPCCBC4001; the other: CPCCBC4053. The transition clock above is computed from CPCCBC4053, the replacement with the latest inclusion date — the reading most favourable to the provider.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • CPCCBC4001ACPCCBC4001not equivalent26 November 2020

    The register records this supersession but attaches no note on what changed.

  • CPCCBC4001ACPCCBC4053not equivalent26 November 2020

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for CPCCBC4001A and for its training package CPC08 (release 9.9), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is CPCCBC4001A on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPCCBC4001A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where CPCCBC4001A is used

training.gov.au lists CPCCBC4001A inside 15 training products, none of them current. Every one of them is below, with the register's own core or elective flag for CPCCBC4001A in that product.

Products no longer current 15 listed

The register still records CPCCBC4001A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeCPCCBC4001A is
CPC40110Certificate IV in Building and Construction (Building)Qualificationcore
CPC40208Certificate IV in Building and Construction (Contract Administration)Qualificationelective
CPC40308Certificate IV in Building and Construction (Estimating)Qualificationcore
CPC40508Certificate IV in Building and Construction (Site Management)Qualificationcore
CPC50210Diploma of Building and Construction (Building)Qualificationcore
FPI30910Certificate III in Timber Truss and Frame Design and ManufactureQualificationelective
FPI30911Certificate III in Timber Truss and Frame Design and ManufactureQualificationelective
FPI40310Certificate IV in Timber Truss and Frame ManufactureQualificationelective
FPI40311Certificate IV in Timber Truss and Frame ManufactureQualificationelective
FPI40410Certificate IV in Timber Truss and Frame DesignQualificationelective
Show the remaining 5 products no longer current
CodeTraining productTypeCPCCBC4001A is
FPI40411Certificate IV in Timber Truss and Frame DesignQualificationelective
FWP30916Certificate III in Timber Truss and Frame Design and ManufactureQualificationelective
FWP40316Certificate IV in Timber Truss and Frame ManufactureQualificationelective
FWP40416Certificate IV in Timber Truss and Frame DesignQualificationelective
MSF40418Certificate IV in Glass and GlazingQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPCCBC4001A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.