Can an RTO still enrol new students in CPP30811?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 20 January 2022. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in CPP30811?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

CPP30811 Certificate III in Fire Protection Inspection and Testing

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

CPP30811Superseded — equivalentCertificate III in Fire Protection Inspection and Testing
equivalent
CPP30821CurrentCertificate III in Fire Protection Inspection and Testing

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

PRM30406CPP30811equivalent9 January 2012
The register records this supersession but attaches no note on what changed.
CPP30811CPP30821equivalent19 January 2021
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for CPP30811 and for its training package CPP07 (release 15.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

CPP30811_R2.docxCPP30811 release 2 · product document · published 26 November 2024
CPP30811_R2.pdfCPP30811 release 2 · product document · published 18 January 2017

Is CPP30811 on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPP30811 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What CPP30811 is made of

training.gov.au lists 28 units for CPP30811: 0 core and 8 elective, and 20 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Elective units 8 listed

Code	Unit	In this product
BSBCUS301	Deliver and monitor a service to customers	not current
BSBFLM303	Contribute to effective workplace relationships	not current
BSBFLM306	Provide workplace information and resourcing plans	not current
BSBFLM309	Support continuous improvement systems and processes	not current
BSBFLM311	Support a workplace learning environment	not current
BSBFLM312	Contribute to team effectiveness	not current
BSBWHS301	Maintain workplace safety	not current
TAEDEL301	Provide work skill instruction	not current

Units the register marks neither core nor elective 20 listed

Code	Unit	Core or elective	In this product
BSBWOR301A	Organise personal work priorities and development	`N/A`	not current
CPCPFS3022A	Conduct annual functional testing of complex water-based fire-suppression systems	`N/A`	not current
CPCPFS3023A	Conduct functional water flow testing	`N/A`	not current
CPPCMN2002A	Participate in workplace safety arrangements	`N/A`	not current
CPPCMN3001B	Participate in environmentally sustainable work practices	`N/A`	not current
CPPFES2003A	Safely move loads and dangerous goods	`N/A`	not current
CPPFES2004A	Identify types of installed fire safety equipment and systems	`N/A`	not current
CPPFES2005A	Demonstrate first attack firefighting equipment	`N/A`	not current
CPPFES2006A	Prepare for installation and servicing operations	`N/A`	not current
CPPFES2007A	Maintain quality of work and promote continuous improvement	`N/A`	not current
CPPFES2047A	Inspect and test control and indicating equipment	`N/A`	not current
CPPFES3024A	Inspect and maintain portable foam-generating equipment	`N/A`	not current
CPPFES3032A	Conduct enclosure integrity testing	`N/A`	not current
CPPFES3038A	Inspect, test and maintain portable fire monitors	`N/A`	not current
CPPFES3040A	Install passive fire and smoke containment systems	`N/A`	not current
CPPFES3042A	Install and commission pre-engineered fire-suppression systems	`N/A`	not current
CPPFES3044A	Interpret installation requirements for gaseous fire-suppression systems	`N/A`	not current
CPPFES3045A	Install gaseous agent containers and actuators	`N/A`	not current
CPPFES3046A	Decommission gaseous agent containers and actuators	`N/A`	not current
HLTFA301C	Apply first aid	`N/A`	not current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPP training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is CPP30811 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.